Items where Subject is "J500 Materials Technology not otherwise specified"

Article

Abd Mutalib, Muhazri, Ahmad Ludin, Norasikin, Nik Ruzalman, Nik Ahmad Aizudden, Barrioz, Vincent, Sepeai, Suhaila, Mat Teridi, Mohd Asri, Su’ait, Mohd Sukor, Ibrahim, Mohd Adib and Sopian, Kamaruzzaman (2018) Progress towards highly stable and lead-free perovskite solar cells. Materials for Renewable and Sustainable Energy, 7 (2). ISSN 2194-1459

Abu Hamed, Tareq, Adamovic, Nadja, Aeberhard, Urs, Alonso-Alvarez, Diego, Amin-Akhlaghi, Zoe, Auf der Maur, Matthias, Beattie, Neil, Bednar, Nikola, Berland, Kristian, Birner, Stefan, Califano, Marco, Capan, Ivana, Cerne, Bostjan, Chilibon, Irinela, Connolly, James. P., Cortes Juan, Frederic, Coutinho, Jose, David, Christin, Deppert, Knut, Donchev, Vesselin, Drev, Marija, Ehlen, Boukje, Ekins-Daukes, Nicholas, Even, Jacky, Fara, Laurentiu, Fuertes Marron, David, Gagliardi, Alessio, Garrido, Blas, Gianneta, Violetta, Gomes, Maria, Guillemoles, Jean-Francois, Guina, Mircea, Halme, Janne, Hocevar, Mateja, Jacak, Lucjan, Jacak, Witold, Jaksic, Zoran, Joseph, Lejo k., Kassavetis, Spyridon, Kazukauskas, Vaidotas, Kleider, Jean-Paul, Kluczyk, Katarzyna, Kopecek, Radovan, Krasovec, Ursa Opara, Lazzari, Jean-Louis, Lifshitz, Efrat, Loncaric, Martin, Madsen, Søren Peder, Vega, Antonio Marti, Mencaraglia, Denis, Messing, Maria E., Armando, Felipe Murphy, Nassiopoulou, Androula G., Neijm, Ahmed, Nemcsics, Akos, Neto, Victor, Pedesseau, Laurent, Persson, Clas, Petridis, Konstantinos, Popescu, Lacramioara, Pucker, Georg, Radovanović, Jelena, Rimada, Julio C., Ristova, Mimoza, Savic, Ivana, Savin, Hele, Sendova-Vassileva, Marushka, Sengul, Abdurrahman, Silva, José, Steiner, Ullrich, Storch, Jan, Stratakis, Emmanuel, Tao, Shuxia, Tomanek, Pavel, Tomić, Stanko, Tukiainen, Antti, Turan, Rasit, Ulloa, Jose Maria, Wang, Shengda, Yuksel, Fatma, Zadny, Jaroslav and Zarbakhsh, Javad (2018) Multiscale in modelling and validation for solar photovoltaics. EPJ Photovoltaics, 9. p. 10. ISSN 2105-0716

Ahmad, Iftikhar, Islam, Mohammad, Alharthi, Nabeel, Alawadhi, Hussain, Subhani, Tayyab, Munir, Khurram, Shah, Syed Ismat, Inam, Fawad and Zhu, Yanqiu (2018) Chemical and structural analyses of the graphene nanosheet/alumina ceramic interfacial region in rapidly consolidated ceramic nanocomposites. Journal of Composite Materials, 52 (3). pp. 417-428. ISSN 0021-9983

Ahmad, Manzoor, Luo, Jikui, Xu, Ben, Purnawali, Hendra, King, Peter, Chalker, Paul, Fu, Yong Qing, Huang, Wei Min and Miraftab, Mohsen (2011) Synthesis and characterization of polyurethane-based shape-memory polymers for tailored Tg around body temperature for medical applications. Macromolecular Chemistry and Physics, 212 (6). pp. 592-602. ISSN 1521-3935

Ahmed, Junaid, Gao, Bin and Woo, Wai Lok (2019) Wavelet Integrated Alternating Sparse Dictionary Matrix Decomposition in Thermal Imaging CFRP Defect Detection. IEEE Transactions on Industrial Informatics, 15 (7). pp. 4033-4043. ISSN 1551-3203

Alazmi, Amira, El Tall, Omar, Rasul, Shahid, Hedhili, Mohamed N., Patole, Shashikant P. and Costa, Pedro M. F. J. (2016) A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide. Nanoscale, 8 (41). pp. 17782-17787. ISSN 2040-3364

Alazmi, Amira, Rasul, Shahid, Patole, Shashikant P. and Costa, Pedro M.F.J. (2016) Comparative study of synthesis and reduction methods for graphene oxide. Polyhedron, 116. pp. 153-161. ISSN 0277-5387

Anjum, Dalaver, Rasul, Shahid, Roldan-Gutierrez, Manuel A. and Costa, Pedro M. F. J. (2016) Characterization of a Porous Carbon Material Functionalized with Cobalt-Oxide/Cobalt Core-Shell Nanoparticles for Lithium Ion Battery Electrodes. MRS Advances, 1 (15). pp. 1061-1066. ISSN 2059-8521

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of 0.5 wt% multi-layer graphene/nanoclay reinforced epoxy nanocomposites. AIMS Materials Science, 3 (3). pp. 1266-1280. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2017) Fractography analysis of 1.0 wt% nanoclay/multi-layer graphene reinforced epoxy nanocomposites. Journal of Composite Materials, 51 (23). pp. 3281-3290. ISSN 0021-9983

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of monolithic epoxy with tailored topography. World Journal of Engineering and Technology, 4 (4). pp. 517-527. ISSN 2331-4249

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis with topographical features of multi-layer graphene reinforced epoxy nanocomposites. Graphene, 5 (4). pp. 166-177. ISSN 2169-3439

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on damage tolerance and fracture toughness of 0.1 wt % multi-layer graphene/clay-epoxy nanocomposites. Polymers, 8 (7). p. 239. ISSN 2073-4360

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on mechanical performance of 0.5 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. AIMS Materials Science, 3 (4). pp. 1294-1308. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2017) Influence of macro-topography on mechanical performance of 1.0 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. Journal of Composite Materials, 51 (19). pp. 2769-2778. ISSN 0021-9983

Atif, Rasheed and Inam, Fawad (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein Journal of Nanotechnology, 7. pp. 1174-1196. ISSN 2190-4286

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites - a review. Polymers, 8 (8). p. 281. ISSN 2073-4360

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Advances, 6 (41). pp. 34188-34197. ISSN 2046-2069

Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Multiscale modelling of graphene platelets-based nanocomposite materials. Composite Structures, 168. pp. 313-321. ISSN 0263-8223

Bakalarou, Angeliki and Theodorakopoulos, Charis (2017) Combined solvent- emulsion- and polyacrylate gel- cleaning of an over-cleaned, injured egg tempera icon. eConservation Journal. ISSN 2183-1335

Ball, Richard, Pesce, Giovanni, Bowen, Chris and Allen, Geoffrey (2012) Characterisation of Lime/Metakaolin Paste Using Impedance Spectroscopy. Key Engineering Materials, 517. pp. 487-494. ISSN 1662-9795

Bauer, Thomas, Forbes, Ian, Pearsall, Nicola and Penlington, Roger (2005) Heat transfer modelling in thermophotovoltaic cavities using glass media. Solar Energy Materials and Solar Cells, 88 (3). pp. 257-268. ISSN 0927-0248

Beeby, Andrew, Duckworth, Andrew, Gameson, R. G., Nicholson, Kate, Clark, R. J. H., Meehan, B. and Parker, Anthony (2016) Pigments of the earliest Northumbrian manuscripts. Scriptorium, 69 (1). pp. 33-59. ISSN 0036-9772

Beeby, Andrew, Gameson, Richard and Nicholson, Catherine (2018) New light on old illuminations. Archives and Records, 39 (2). pp. 244-256. ISSN 2325-7962

Blacklock, Matthew, Joosten, Mathew W., Pingkarawat, Khomkrit and Mouritz, Adrian P. (2016) Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique. Composites Part A: Applied Science and Manufacturing, 91 (1). pp. 283-291. ISSN 1359-835X

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Masonry wall panels with GFRP and steel-cord strengthening subjected to cyclic shear: An experimental study. Construction and Building Materials, 56. pp. 63-73. ISSN 09500618

Borri, Antonio, Corradi, Marco and Speranzini, Emanuela (2013) Reinforcement of wood with natural fibers. Composites Part B: Engineering, 53. pp. 1-8. ISSN 1359-8368

Bortot, Eliana (2017) Analysis of multilayer electro-active spherical balloons. Journal of the Mechanics and Physics of Solids, 101. pp. 250-267. ISSN 0022-5096

Bortot, Eliana, Amir, Oded and Shmuel, Gal (2018) Topology optimization of dielectric elastomers for wide tunable band gaps. International Journal of Solids and Structures, 143. pp. 262-273. ISSN 0020-7683

Bortot, Eliana, Denzer, Ralf, Menzel, Andreas and Gei, Massimiliano (2016) Analysis of viscoelastic soft dielectric elastomer generators operating in an electrical circuit. International Journal of Solids and Structures, 78-79. pp. 205-215. ISSN 0020-7683

Bortot, Eliana and Shmuel, Gal (2017) Tuning sound with soft dielectrics. Smart Materials and Structures, 26 (4). 045028. ISSN 0964-1726

Brabcova, Zuzana, McHale, Glen, Wells, Gary, Brown, Carl and Newton, Michael (2017) Electric field induced reversible spreading of droplets into films on lubricant impregnated surfaces. Applied Physics Letters, 110 (12). p. 121603. ISSN 0003-6951

Campbell, Stephen, Qu, Yongtao, Major, Jonathan, Lagarde, Delphine, Labbé, Christophe, Maiello, Pietro, Barrioz, Vincent, Beattie, Neil and Zoppi, Guillaume (2019) Direct evidence of causality between chemical purity and band-edge potential fluctuations in nanoparticle ink-based Cu2ZnSn(S,Se)4 solar cells. Journal of Physics D: Applied Physics, 52 (13). p. 135102. ISSN 0022-3727

Chen, Lifeng, Lopez-Garcia, Martin, Taverne, Mike P. C., Zheng, Xu, Ho, Daniel and Rarity, John (2017) Direct wide-angle measurement of a photonic band structure in a three-dimensional photonic crystal using infrared Fourier imaging spectroscopy. Optics Letters, 42 (8). pp. 1584-1587. ISSN 0146-9592

Chen, Lifeng, Morgan, Katrina A., Alzaidy, Ghada A., Huang, Chung-Che, Ho, Daniel, Taverne, Mike P. C., Zheng, Xu, Ren, Zhong, Feng, Zhuo, Zeimpekis, Ioannis, Hewak, Daniel W. and Rarity, John G. (2019) Observation of Complete Photonic Bandgap in Low Refractive Index Contrast Inverse Rod-Connected Diamond Structured Chalcogenides. ACS Photonics, 6 (5). pp. 1248-1254. ISSN 2330-4022

Chen, Lifeng, Taverne, Mike P. C., Zheng, Xu, Lin, Jia-De, Oulton, Ruth, Lopez-Garcia, Martin, Ho, Daniel and Rarity, John G. (2015) Evidence of near-infrared partial photonic bandgap in polymeric rod-connected diamond structures. Optics Express, 23 (20). pp. 26565-26575. ISSN 1094-4087

Chen, Wenge, Yang, Yixiao, Zhao, Qian, Liu, Xiaoteng and Fu, Yong Qing (2022) Nanoscale mechanics of metal-coated graphene nanocomposite powders. Materials Today Communications, 33. p. 104731. ISSN 2352-4928

Clayton, Andrew J., Irvine, Stuart J. C., Charbonneau, Cecile M. E., Siderfin, Peter and Barrioz, Vincent (2015) A new approach to thin-film SnS PV using MOCVD. Materials Research Innovations, 19 (7). pp. 477-481. ISSN 1432-8917

Dai, Xingyi, Du, Yuzhang, Yang, Jiye, Wang, Ding, Gu, Junwei, Li, Yifan, Wang, Steven, Xu, Ben Bin and Kong, Jie (2019) Recoverable and Self-healing Electromagnetic Wave Absorbing Nanocomposites. Composites Science and Technology, 174. pp. 27-32. ISSN 0266-3538

Daoush, Walid, Park, Hee Sup, Inam, Fawad, Lim, Byung Kyu and Hong, Soon Hyung (2015) Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering. Metallurgical and Materials Transactions A, 46 (3). pp. 1385-1393. ISSN 1073-5623

Deng, Wei, Sun, Yajun, Yao, Xiaoxue, Subramanian, Karpagam, Ling, Chen, Wang, Hongbo, Chopra, Shauhrat S., Xu, Ben Bin, Wang, Jie-Xin, Chen, Jian-Feng, Wang, Dan, Amancio, Honeyfer, Pramana, Stevin, Ye, Ruquan and Wang, Steven (2022) Masks for COVID-19. Advanced Science, 9 (3). p. 2102189. ISSN 2198-3844

Diamanti, Eleftheria, Muzzio, Nicolas, Gregurec, Danijela, Irigoyen, Joseba, Pasquale, Miguel, Azzaroni, Omar, Brinkmann, Martin and Moya, Sergio Enrique (2016) Impact of thermal annealing on wettability and antifouling characteristics of alginate poly-l-lysine polyelectrolyte multilayer films. Colloids and Surfaces B: Biointerfaces, 145. pp. 328-337. ISSN 0927-7765

Dilpazir, S., Usman, M., Rasul, Shahid and Arshad, S. N. (2016) A simple UV-ozone surface treatment to enhance photocatalytic performance of TiO2 loaded polymer nanofiber membranes. RSC Advances, 6 (18). pp. 14751-14755. ISSN 2046-2069

Dudziak, Tomasz, Du, H. L., Datta, Psantu and Hovsepian, Papken (2015) Air oxidation behaviour of standard PVD and novel HIPIMS coatings at 750°C for 1000 h. Corrosion Engineering, Science and Technology, 50 (2). pp. 118-127. ISSN 1478-422X

Dudziak, Tomasz, Du, Hu, Datta, Psantu, Wilson, Alasdair, Ross, Ian and Moser, Martin (2009) Sulphidation/oxidation behaviour of TiAlCr and Al2Au coated Ti45Al8Nb alloy at 750°C. Corrosion Science, 51 (5). pp. 1189-1196. ISSN 0010-938X

Dudziak, Tomasz, Wilson, Alasdair, Ahmad, Haifa and Datta, Psantu (2009) Studies of the effectiveness of certain high performance coatings in preventing hot corrosion degradation of Ti - alumide alloys. Defect and Diffusion Forum, 289. pp. 437-445. ISSN 1012-0386

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2019) Additive manufacturing of polymer composites: Processing and modeling approaches. Composites Part B: Engineering, 171. pp. 166-182. ISSN 1359-8368

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2019) Modelling of the temperature and residual stress fields during 3D printing of polymer composites. International Journal of Advanced Manufacturing Technology, 104 (5-8). pp. 1661-1676. ISSN 0268-3768

Elmarakbi, Ahmed, Azoti, Wiyao and Serry, Mohamed (2017) Multiscale modelling of hybrid glass fibres reinforced graphene platelets polyamide PA6 matrix composites for crashworthiness applications. Applied Materials Today, 6. pp. 1-8. ISSN 2352-9407

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, H. (2009) Finite element simulation of delamination growth in composite materials using LS-DYNA. Composites Science and Technology, 69 (14). pp. 2383-2391. ISSN 0266-3538

Elmarakbi, Ahmed, Safty, Sherif El, Martorana, Brunetto and Azoti, Wiyao (2016) Nanocomposites for automotive: enhanced graphene-based polymer materials and multi-scale approach. International Journal of Automotive Composites, 2 (2). p. 155. ISSN 2051-8218

Erfanian Nakhchi Toosi, Mahdi and Esfahani, J.A. (2020) CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert. Powder Technology, 367. pp. 877-888. ISSN 0032-5910

Erfanian Nakhchi Toosi, Mahdi and Esfahani, J.A. (2020) Improving the melting performance of PCM thermal energy storage with novel stepped fins. Journal of Energy Storage, 30. p. 101424. ISSN 2352-152X

Etor, David, Dodd, Linzi, Balocco, Claudio and Wood, David (2019) Conduction mechanisms in metal/self-assembled monolayer/metal junction. Micro & Nano Letters, 14 (7). pp. 808-811. ISSN 1750-0443

Etor, David, Dodd, Linzi, Wood, David and Balocco, Claudio (2016) An Ultrathin Organic Insulator for Metal–Insulator–Metal Diodes. IEEE Transactions on Electron Devices, 63 (7). pp. 2887-2891. ISSN 0018-9383

Farajpour, Ali, Ghayesh, Mergen H. and Farokhi, Hamed (2019) Super and subcritical nonlinear nonlocal analysis of NSGT nanotubes conveying nanofluid. Microsystem Technologies, 25 (12). pp. 4693-4707. ISSN 0946-7076

Farokhi, Hamed, Païdoussis, Michael P. and Misra, Arun K. (2016) A new nonlinear model for analyzing the behaviour of carbon nanotube-based resonators. Journal of Sound and Vibration, 378. pp. 56-75. ISSN 0022-460X

Farrag, Mohamed and Putrus, Ghanim (2012) Design of an Adaptive Neurofuzzy Inference Control System for the Unified Power-Flow Controller. IEEE Transactions on Power Delivery, 27 (1). pp. 53-61. ISSN 0885-8977

Fu, Yong Qing, Shearwood, Christopher, Xu, Ben, Yu, L. G. and Khor, Khiam Aik (2010) Characterization of spark plasma sintered Ag nanopowders. Nanotechnology, 21 (11). p. 115707. ISSN 0957-4484

Gao, Bin, Li, Xiaoqing, Woo, Wai Lok and Yun Tian, Gui (2017) Quantitative validation of Eddy current stimulated thermal features on surface crack. NDT & E International, 85. pp. 1-12. ISSN 0963-8695

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Gei, Massimiliano, Springhetti, Roberta and Bortot, Eliana (2013) Performance of soft dielectric laminated composites. Smart Materials and Structures, 22 (10). p. 104014. ISSN 0964-1726

Geraldi, Nicasio, Guan, Jian, Dodd, Linzi, Maiello, Pietro, Xu, Bin, Wood, David, Newton, Michael I., Wells, Gary and McHale, Glen (2019) Double-sided slippery liquid-infused porous materials using conformable mesh. Scientific Reports, 9. p. 13280. ISSN 2045-2322

Gonzalez Sanchez, Sergio, Pérez, Pablo, Garcés, Gerardo and Adeva, Paloma (2016) Influence of the processing route on the mechanical properties at high temperatures of Mg-Ni-Y-RE alloys containing LPSO-phases. Materials Science and Engineering: A, 673. pp. 266-279. ISSN 0921-5093

Griffin, D., Daadbin, Ali and Datta, Psantu (2000) Deformation and fracture, during cooling, of the alumina scale developed on Fe3Al. Surface and Coatings Technology, 126 (2-3). pp. 142-151. ISSN 0257 8972

Griffin, D., Daadbin, Ali, Datta, Psantu and Burnell-Gray, J. (1995) Modelling of crack propagation through the interfacial region of a SiC/titanium metal matrix composite. Mechanical and corrosion properties. Series A, Key engineering materials, 99-100. pp. 341-346. ISSN 0252 1059

Hussain, Arshad, Ahmed, Rashid, Ali, Nisar, Abd El-Salam, Naser, Deraman, Karim bin and Fu, Yong Qing (2017) Synthesis and characterization of thermally evaporated copper bismuth sulphide thin films. Surface and Coatings Technology, 320. pp. 404-408. ISSN 0257-8972

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Iqbal, Sadia Sagar, Inam, Fawad, Bahadar, Ali, Bashir, Arshad, Hassan, Faiza, Khan, Mohammad Bilal, Khan, Zaffar and Jamil, Tahir (2018) Ablation, thermal stability/transport/phase transition study of carbon nanofiber-reinforced elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 131 (3). pp. 2637-2646. ISSN 1588-2926

Jiang, Yinzhu, Sun, Wenping, Xu, Ben, Yan, Mi and Bahlawane, Naoufal (2011) Unusual enhancement in electrical conductivity of tin oxide thin films with zinc doping. Physical Chemistry Chemical Physics, 13 (13). pp. 5760-5763. ISSN 1463-9076

Johnston, David, Forbes, Ian, Miles, Robert and Ramakrishna Reddy, Kotte (2001) Chemical bath deposition of zinc sulphide using sodium citrate as a complementary complexing agent. Journal of Materials Science Letters, 20 (10). pp. 921-923. ISSN 0261-8028

Joosten, Matthew, Yang, Qingda, Blacklock, Matthew and Wang, C. H. (2018) A cohesive network approach for modelling fibre and matrix damage in composite laminates. Composite Structures, 206. pp. 658-667. ISSN 0263-8223

Kartopu, Giray, Crozier, M., Brunton, A., Barrioz, Vincent, Hodgson, Simon David, Jones, Shannon and Irvine, Stuart J. C. (2015) Comparative study of conventional vs. one-step-interconnected (OSI) monolithic CdTe modules. Materials Research Innovations, 19 (7). pp. 488-493. ISSN 1432-8917

Katsamangas, Kostandinos, Bhat, Badekai Ramachandra and Inam, Fawad (2015) Scanning Electronic Microscopy for analysis of the effects of surfactants on de-wrinkling and dispersion of graphene. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 728-732.

Khaliq, Jibran, Hoeks, Theo and Groen, Pim (2019) Fabrication of Piezoelectric Composites Using High-Temperature Dielectrophoresis. Journal of Manufacturing and Materials Processing, 3 (3). ISSN 2504-4494

Kong, Lingping, Liu, Terence, Wei, Jin Jia, Wang, Steven, Xu, Bin, Long, Donghui and Chen, Fei (2018) T-Nb2O5 nanoparticle enabled pseudocapacitance with a fast Li-ion intercalation. Nanoscale, 10 (29). pp. 14165-14170. ISSN 2040-3364

Kumar, Rahul, Han, Wei, Liu, Dejun, Ng, Wai Pang, Binns, Richard, Busawon, Krishna, Fu, Yong Qing, Ghassemlooy, Zabih, Underwood, Chris, Mahkamov, Khamid, Yuan, Jinhui, Yu, Chongxiu, Shu, Huazhong, Li, Xing Ao, Guo, Tuan, Farrell, Gerald, Semenova, Yuliya and Wu, Qiang (2018) Optical fibre sensors for monitoring phase transitions in phase changing materials. Smart Materials and Structures, 27 (10). p. 105021. ISSN 0964-1726

Kuvshinov, Dmitriy, Bown, Mark, MacInnes, Jordan, Allen, Ray, Ge, Rile, Aldous, Leigh, Hardacre, Christopher, Doy, Nicola, Newton, Michael and McHale, Glen (2011) Thermal conductivity measurement of liquids in a microfluidic device. Microfluidics and Nanofluidics, 10 (1). pp. 123-132. ISSN 1613-4982

Lamb, Daniel Ash, Irvine, Stuart James, Clayton, Andrew James, Kartopu, Giray, Barrioz, Vincent, Hodgson, Simon David, Baker, Mark, Grilli, Rossana, Hall, James, Underwood, Craig and Kimber, Richard (2016) Characterization of MOCVD Thin-Film CdTe Photovoltaics on Space-Qualified Cover Glass. IEEE Journal of Photovoltaics, 6 (2). pp. 557-561. ISSN 2156-3381

Lan, Chunfeng, Lan, Huabin, Liang, Guangxing, Zhao, Jun, Peng, Huanxin, Fan, Bo, Zheng, Zhuang-Hao, Sun, Huibin, Luo, Jingting, Fan, Ping and Fu, Yong Qing (2018) Simultaneous Formation of CH₃NH₃PbI₃ and electron transport layers using antisolvent method for efficient perovskite solar cells. Thin Solid Films, 660. pp. 75-81. ISSN 0040-6090

Lei, Ming, Xu, Ben, Pei, Yu Tao, Lu, Haibao and Fu, Yong Qing (2016) Micro-mechanics of nanostructured carbon/shape memory polymer hybrid thin film. Soft Matter, 12. pp. 106-114. ISSN 1744-683X

Lei, Zhefeng, Zhu, Xiaodong, Li, Yanhuai, Song, Zhongxiao, Liu, Haiping and Fu, Yong Qing (2018) Characterization and tribological behavior of TiAlN/TiAlCN multilayer coatings. Journal Of Tribology, 140 (5). ISSN 0742-4787

Li, Hao, Li, Zhijie, Sun, Mengxuan, Wu, Zhonglin, Shen, Wenzhong and Fu, Yong Qing (2019) Zinc cobalt sulfide nanoparticles as high performance electrode material for asymmetric supercapacitor. Electrochimica Acta, 319. pp. 716-726. ISSN 0013-4686

Lin, Jia-De, Ho, Daniel, Chen, Lifeng, Lopez-Garcia, Martin, Jiang, Shun-An, Taverne, Mike P. C., Lee, Chia-Rong and Rarity, John G. (2018) Microstructure-Stabilized Blue Phase Liquid Crystals. ACS Omega, 3 (11). pp. 15435-15441. ISSN 2470-1343

Liu, Terence, Xi, Jiabin, Xu, Bin, Fang, Bo, Wang, Yucheng, Bayati, Maryam, Scott, Keith and Gao, Chao (2018) A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol through Graphene Aerogel. Small Methods, 2 (10). p. 1800138. ISSN 2366-9608

Lu, Haibao, Xing, Ziyu, Hossain, Mokarram and Fu, Yong Qing (2019) Modeling strategy for dynamic-modal mechanophore in double-network hydrogel composites with self-growing and tailorable mechanical strength. Composites Part B: Engineering, 179. p. 107528. ISSN 1359-8368

Lu, Haibo, Xin, Wang, Yao, Yongtao, Guo, Jihua, Xu, Ben and Fu, Yong Qing (2015) Synergistic effect of siloxane modified aluminum nanopowders and carbon fiber on electrothermal efficiency of polymeric shape memory nanocomposite. Composites Part B Engineering, 80. pp. 1-6. ISSN 1359-8368

Luo, Jing-Ting, Quan, Ao-Jie, Liang, Guang-Xing, Zheng, Zhuang-Hao, Ramadan, Sami, Fu, Chen, Li, Hong-Lang and Fu, Yong Qing (2017) Love-mode surface acoustic wave devices based on multilayers of TeO2/ZnO(1120)/Si(100) with high sensitivity and temperature stability. Ultrasonics, 75. pp. 63-70. ISSN 0041-624X

McHale, Glen, Newton, Michael, Shirtcliffe, Neil and Geraldi, Nicasio (2011) Capillary origami: superhydrophobic ribbon surfaces and liquid marbles. Beilstein Journal of Nanotechnology, 2. pp. 145-151. ISSN 2190-4286

Miles, Robert, Forbes, Ian and Hynes, Kathleen (2005) Photovoltaic solar cells: an overview of state-of-the-art cell development and environmental issues. Progress in Crystal Growth and Characterization of Materials, 51 (1-3). pp. 1-42. ISSN 0960-8974

Miles, Robert, Ogah, Ogah E., Zoppi, Guillaume and Forbes, Ian (2009) Thermally evaporated thin films of SnS for application in solar cell devices. Thin Solid Films, 517 (17,1). pp. 4702-4705. ISSN 0040-6090

Mills, Graham, Dean, John and Pawliszyn, Janusz (2008) Foreword. Journal of Chromatography A, 1196–7. pp. 1-2. ISSN 0021-9673

Neuschitzer, Markus, Espindola-Rodriguez, Moises, Guc, Maxim, Marquez Prieto, Jose, Giraldo, Sergio, Forbes, Ian, Perez-Rodriguez, Alejandro and Saucedo, Edgardo (2018) Revealing the beneficial effects of Ge doping on Cu2ZnSnSe4 thin film solar cells. Journal of Materials Chemistry A, 6 (25). pp. 11759-11772. ISSN 2050-7488

Ngo, Quang Minh, Ho, Daniel, Pugh, Jon R., Sarua, Andrei and Cryan, Martin J. (2018) Enhanced UV/blue fluorescent sensing using metal-dielectric-metal aperture nanoantenna arrays. Current Applied Physics, 18 (7). pp. 793-798. ISSN 1567-1739

Okolo, Chichi, Rafique, Rafaila, Iqbal, Sadia Sagar, Subhani, Tayyab, Saharudin, Mohd, Bhat, Badekai Ramachandra and Inam, Fawad (2019) Customizable ceramic nanocomposites using carbon nanotubes. Molecules, 24 (17). p. 3176. ISSN 1420-3049

Ortiz-Huerta, Felipe, Chen, Lifeng, Taverne, Mike, Hadden, John P., Johnson, Mack, Ho, Daniel and Rarity, John G. (2018) Fabrication of hybrid Fabry-Pérot microcavity using two-photon lithography for single-photon sources. Optics Express, 26 (25). pp. 33245-33252. ISSN 1094-4087

Pesce, Cecilia, Moretto, Ligia, Orsega, Emilio, Pesce, Giovanni, Corradi, Marco and Weber, Johannes (2019) Effectiveness and Compatibility of a Novel Sustainable Method for Stone Consolidation Based on Di-Ammonium Phosphate and Calcium-Based Nanomaterials. Materials, 12 (18). ISSN 1996-1944

Prathap, Pathi, Revathi, Naidu, Ramakrishna Reddy, Kotte and Miles, Robert (2009) Thickness dependence of structure and optoelectronic properties of In2O3:Mo films prepared by spray pyrolysis. Thin Solid Films, 518 (4). pp. 1271-1274. ISSN 0040-6090

Qu, Yongtao, Zoppi, Guillaume, Peter, Laurence, Beattie, Neil and Jourdain, Sophie (2018) Enhanced external quantum efficiency from Cu2ZnSn(S,Se)4 solar cells prepared from nanoparticle inks. Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes, 57 (8S3). 08RC01. ISSN 0021-4922

Qureshi, Y., Tarfaoui, M., Lafdi, Khalid and Lafdi, K. (2019) Development of microscale flexible nylon/Ag strain sensor wire for real-time monitoring and damage detection in composite structures subjected to three-point bend test. Composites Science and Technology, 181. p. 107693. ISSN 0266-3538

Ramakrishna Reddy, Kotte, Miles, Robert, Forbes, Ian and Reddy, T. B. S. (2002) Highly orientated and conducting ZnO:Ga layers grown by chemical spray pyrolysis. Surface and Coatings Technology. pp. 110-113. ISSN 0257-8972

Ramakrishna Reddy, Kotte, Prathap, Pathi, Revathi, Naidu, Reddy, A. S. N. and Miles, Robert (2009) Mg-composition induced effects on the physical behavior of sprayed Zn1-xMgxO films. Thin Solid Films, 518 (4). pp. 1275-1278. ISSN 0040-6090

Rasul, Shahid, Alazmi, A., Jaouen, K., Hedhili, M.N. and Costa, P.M.F.J. (2017) Rational design of reduced graphene oxide for superior performance of supercapacitor electrodes. Carbon, 111. pp. 774-781. ISSN 0008-6223

Richardson, Alan (2005) Cement manufacture with regard to global warming. Building and Construction North.

Richardson, Alan (2005) Early Life Freeze-thaw tests on concrete with varying types of fibre content. International Civil Engineering Abstracts. pp. 1-2. ISSN 0332-4095

Richardson, Alan (2003) Enhanced Freeze/Thaw Durability: Alternative options? International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) How to Make Concrete Durable? – The Role of Polypropylene Fibres. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) New British Standards for Concrete – How will they affect us, now and in the future? International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) Polypropylene Fibres, with regard to Concrete Resistivity and Subsequent Durability. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) Structural considerations when using polypropylene fibres in concrete. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan, Allain, Pierre and Veuille, Maxime (2010) Concrete with crushed, graded and washed recycled construction demolition waste as a coarse aggregate replacement. Structural Survey, 28 (2). pp. 142-148. ISSN 0263-080X

Richardson, Alan and McIntyre, Chris (2010) The Effect of Fibre Concrete on the Ultimate Pull Out force of Anchor Bolts. Concrete, 44 (8). p. 48. ISSN 0010-5317

Risdonne, Valentina, Hubbard, Charlotte, López Borge, Victor Hugo and Theodorakopoulos, Charis (2022) Materials and Techniques for the Coating of Nineteenth Century Plaster Casts: A Review of Historical Sources. Studies in Conservation, 67 (4). pp. 186-208. ISSN 0039-3630

Saharudin, Mohd, Atif, Rasheed and Inam, Fawad (2017) Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. Polymers, 9 (1). p. 27. ISSN 2073-4360

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay–polyester nanocomposites exposed to diluted methanol. Journal of Composite Materials, 51 (11). pp. 1653-1664. ISSN 1530-793X

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2015) The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6. pp. 1076-1089. ISSN 2046-2069

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay/polyester. International Journal of Advances in Science Engineering and Technology, 4 (1*). pp. 42-46. ISSN 2321-9009

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Environmental stress cracking resistance of halloysite nanoclay-polyester nanocomposites. World Journal of Engineering and Technology, 5 (3). pp. 389-403. ISSN 2331-4249

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of Nanomaterials (JNM), 2016. p. 2604631. ISSN 1687-4110

Sarwar, Mohammed and Armitage, A. (2003) Tooling requirements for glass container production for the narrow neck press and blow process. Journal of Materials Processing Technology, 139 (1-3). pp. 160-163. ISSN 0924-0136

Sarwar, Mohammed and Haider, Julfikar (2008) Development of advanced surface engineering technologies for the benefit of multipoint cutting tools. Advanced Materials Research. pp. 1043-1050. ISSN 1022-6680

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2010) Forces, wear modes and mechanisms in bandsawing steel workpieces. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 224 (11). pp. 155-162. ISSN 0954-4054

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2009) Measurement of specific cutting energy for evaluating the efficiency of bandsawing different workpiece materials. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 958-965. ISSN 0890-6955

Selim, Mohamed S., Shenashen, M.A., El-Safty, Sherif A., Higazy, S.A., Selim, Mahmoud M., Isago, H. and Elmarakbi, Ahmed (2017) Recent progress in marine foul-release polymeric nanocomposite coatings. Progress in Materials Science, 87. pp. 1-32. ISSN 0079-6425

Selim, Mohamed S., Shenashen, Mohamed A., Elmarakbi, Ahmed, Fatthallah, Nesreen A., Hasegawa, Shin-ichi and El- Safty, Sherif A. (2017) Synthesis of ultrahydrophobic and thermally stable inorganic–organic nanocomposites for self-cleaning foul release coatings. Chemical Engineering Journal, 320. pp. 653-666. ISSN 1385-8947

Selim, Mohamed S., Shenashen, Mohamed A., Fatthallah, Nesreen A., Elmarakbi, Ahmed and El-Safty, Sherif A. (2017) In Situ Fabrication of One-Dimensional-Based Lotus-Like Silicone/ϒ-Al2 O3 Nanocomposites for Marine Fouling Release Coatings. ChemistrySelect, 2 (30). pp. 9691-9700. ISSN 2365-6549

Shi, Le, Zhuo, Sifei, Abulikemu, Mutalifu, Mettela, Gangaiah, Palaniselvam, Thangavelu, Rasul, Shahid, Tang, Bo, Yan, Buyi, Saleh, Navid B. and Wang, Peng (2018) Annealing temperature effects on photoelectrochemical performance of bismuth vanadate thin film photoelectrodes. RSC Advances, 8 (51). pp. 29179-29188. ISSN 2046-2069

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2010) Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. Journal of Materials Processing Technology, 210 (8). pp. 1023-1034. ISSN 0924-0136

Snee, David and Ma, Yi-Ping (2019) Edge solitons in a nonlinear mechanical topological insulator. Extreme Mechanics Letters, 30. p. 100487. ISSN 2352-4316

Speranzini, Emanuela, Agnetti, Stefano and Corradi, Marco (2016) Experimental analysis of adhesion phenomena in fibre-reinforced glass structures. Composites Part B: Engineering, 101. pp. 155-166. ISSN 1359-8368

Sun, Li, Xu, Ben and Zhong, Ming-Qiang (2006) Study on the modification of polypropylene through melt-grafting. Plastics Science and Technology, 3. 005. ISSN 1005-3360

Sun, Li, Zhong, Ming-Qiang and Xu, Ben (2006) Study on the water-absorption and tribological properties of PA-6/PP blends. Materials Engineering, S1. ISSN 1001-4381

Tait, Michael W. and Cheung, Wai Ming (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349

Tang, Rong, Zheng, Zhuang-Hao, Su, Zheng-Hua, Li, Xue-Jin, Wei, Ya-Dong, Zhang, Xiang-Hua, Fu, Yong Qing, Luo, Jing Ting, Fan, Ping and Liang, Guang-Xing (2019) Highly efficient and stable planar heterojunction solar cell based on sputtered and post-selenized Sb2Se3 thin film. Nano Energy, 64. p. 103929. ISSN 2211-2855

Tao, Ran, Hasan, Sameer, Wang, Hong Zhe, Zhou, Jian, Luo, Jing Ting, McHale, Glen, Gibson, Des, Canyelles-Pericas, Pep, Cooke, Michael D., Wood, David, Liu, Yang, Wu, Qiang, Ng, Wai Pang, Franke, Thomas and Fu, Yong Qing (2018) Bimorph material/structure designs for high sensitivity flexible surface acoustic wave temperature sensors. Scientific Reports, 8 (1). p. 9052. ISSN 2045-2322

Tao, Ran, Wang, W. B., Luo, Jingting, Hasan, S., Torun, Hamdi, Canyelles-Pericas, Pep, Zhou, J., Xuan, W. P., Cooke, Michael, Gibson, Debra, Wu, Qiang, Ng, Wai Pang, Luo, J. K. and Fu, Yong Qing (2019) Thin film flexible/bendable acoustic wave devices: evolution, hybridization and decoupling of multiple acoustic wave modes. Surface and Coatings Technology, 357. pp. 587-594. ISSN 0257-8972

Taverne, Mike P. C., Ho, Daniel and Rarity, John G. (2015) Investigation of defect cavities formed in three-dimensional woodpile photonic crystals. Journal of the Optical Society of America B, 32 (4). pp. 639-648. ISSN 0740-3224

Taverne, Mike P. C., Ho, Daniel, Zheng, Xu, Chen, Lifeng, Fang, Chen-Hsuan N. and Rarity, John (2018) Strong light confinement in rod-connected diamond photonic crystals. Optics Letters, 43 (21). pp. 5202-5205. ISSN 0146-9592

Taverne, Mike P. C., Ho, Daniel, Zheng, Xu, Liu, S., Chen, Lifeng, Lopez-Garcia, Martin and Rarity, John G. (2017) Modelling defect cavities formed in inverse three-dimensional rod-connected diamond photonic crystals. Europhysics Letters, 116 (6). ISSN 0295-5075

Taverne, Mike P.C., Zeng, Xu, Morgan, Katrina A., Zeimpekis, Ioannis, Huang, Chung-Che, Ho, Daniel, Mostafavi, Mahmoud and Shterenlikht, Anton (2018) Fabrication of micro-scale fracture specimens for nuclear applications by direct laser writing. MRS Advances, 3 (31). pp. 1771-1775. ISSN 2059-8521

Teng, Xiangyu, Huo, Dehong, Chen, Wanqung, Wong, Eugene, Zheng, Lu and Shyha, Islam (2018) Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes, 32. pp. 116-126. ISSN 1526-6125

Teng, Xiangyu, Huo, Dehong, Shyha, Islam, Chen, Wanqun and Wong, Eugene (2018) An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2127-2140. ISSN 0268-3768

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Lee, Seunghye (2018) Postbuckling analysis of functionally graded nanoplates based on nonlocal theory and isogeometric analysis. Composite Structures, 201. pp. 13-20. ISSN 0263-8223

Torun, Hamdi and Urey, Hakan (2006) Thermal deflections in multilayer microstructures and athermalization. Journal of Applied Physics, 100 (2). 023527. ISSN 0021-8979

Villapún Puzas, Victor Manuel, Dover, Lynn, Cross, Andrew and Gonzalez Sanchez, Sergio (2016) Antibacterial Metallic Touch Surfaces. Materials, 9 (9). p. 736. ISSN 1996-1944

Villapún Puzas, Victor Manuel, Medina, Judith, Pérez, Pablo, Esat, Faye, Inam, Fawad and Gonzalez Sanchez, Sergio (2017) Strategy for preventing excessive wear rate at high loads in bulk metallic glass composites. Materials & Design, 135. pp. 300-308. ISSN 0264-1275

Villapún Puzas, Victor Manuel, Zhang, H., Howden, C., Chow, L. Cheung, Esat, Faye, Pérez, Pablo, Sort, Jordi, Bull, Steve, Stach, James and Gonzalez Sanchez, Sergio (2017) Antimicrobial and wear performance of Cu-Zr-Al metallic glass composites. Materials & Design, 115. pp. 93-102. ISSN 0264-1275

Wan, Chenglong, Ho, Daniel, Nunez-Sanchez, S., Chen, Lifeng, Lopez-Garcia, Martin, Pugh, Jon, Zhu, Bofeng, Selvaraj, P., Mallick, T., Senthilarasu, S. and Cryan, Martin J. (2016) A selective metasurface absorber with an amorphous carbon interlayer for solar thermal applications. Nano Energy, 26. pp. 392-397. ISSN 2211-2855

Wei, Jiacheng, Atif, Rasheed, Vo, Thuc and Inam, Fawad (2015) Graphene nanoplatelets in epoxy system: dispersion, reaggregation, and mechanical properties of nanocomposites. Journal of Nanomaterials (JNM), 2015. p. 561742. ISSN 1687-4110

Wei, Jiacheng and Inam, Fawad (2017) Processing of epoxy/graphene nanocomposites: effects of surfactants. Journal of Polymer Science & Applications, 1 (1). p. 1000101.

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation. Royal Society Open Science, 4 (170778). ISSN 2054-5703

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2018) Effects of surfactants on the properties of epoxy/graphene nanocomposites. Journal of Reinforced Plastics and Composites. ISSN 0731-6844

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) N,N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers, 9 (6). p. 193. ISSN 2073-4360

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2015) Epoxy/ graphene nanocomposites – processing and properties: a review. RSC Advances, 90 (5). pp. 73510-73524. ISSN 2046-2069

Wells, Gary, Ruiz Gutierrez, Elfego, Ledesma Aguilar, Rodrigo, Le Lirzin, Youen, Nourry, Anthony, Orme, Bethany and Pradas, Marc (2018) Snap evaporation of droplets on smooth topographies. Nature Communications, 9. p. 1380. ISSN 2041-1723

Whalley, Jason and Curwen, Peter (2018) Vodafone signals the demise of copper: A regular column on the information industries. Digital Policy, Regulation and Governance, 20 (3). pp. 288-290. ISSN 2398-5038

Williams, Gwilym, Hunt, Matthew, Boehm, Benedikt, May, Andrew, Taverne, Michael, Ho, Daniel, Giblin, Sean, Read, Dan, Rarity, John, Allenspach, Rolf and Ladak, Sam (2018) Two-photon lithography for 3D magnetic nanostructure fabrication. Nano Research, 11 (2). pp. 845-854. ISSN 1998-0124

Xiang, Sai-Fei, Zhong, Ming-Qiang and Xu, Ben (2006) Preparation and characterization of PC/ABS/Montmorillonite composite. China Plastics Industry, 34 (6). pp. 23-25. ISSN 1005-5770

Xu, Ben and Hayward, Ryan (2013) Low-voltage switching of crease patterns on hydrogel surfaces. Advanced Materials, 25 (39). pp. 5555-5559. ISSN 1521-4095

Xu, Ben, Huang, Wei Min, Pei, Yu Tao, Chen, Zhen Guo, Kraft, Arno, Reuben, Robert, de Hosson, Jeff and Fu, Yong Qing (2009) Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites. European Polymer Journal, 45 (7). pp. 1904-1911. ISSN 0014-3057

Xu, Ben, Zhong, Ming-Qiang, Sun, Li, Xiang, Sai-Fei and Xu, Li-Xin (2007) The UV aging resistance and crystallization of PP/Nano-TiO2, or Nano-ZnO composites. Polymer Materials Science & Engineering, 23 (1). pp. 137-140. ISSN 1000-7555

Xu, Bin, Zhong, Ming Qiang, Sun, Li, Xiang, Sai Fei and Xu, Li Xin (2007) UV ageing resistance and crystallization of PP/Nano-TiO2 or Nano-ZnO composites. Polymeric Materials Science and Engineering, 23 (1). pp. 137-140. ISSN 1000-7555

Yu, Shenglan, Li, Yong, Lu, Yunhao, Xu, Ben, Wang, Qiuting, Yan, Mi and Jiang, Yinzhu (2015) A promising cathode material of sodium iron–nickel hexacyanoferrate for sodium ion batteries. Journal of Power Sources, 275. pp. 45-49. ISSN 0378-7753

Yuan, Tianzhi, Jiang, Yinzhu, Sun, Wenping, Bo, Xiang, Li, Yong, Yan, Mi, Xu, Ben and Dou, Shixue (2016) Ever-Increasing Pseudocapacitance in RGO–MnO–RGO Sandwich Nanostructures for Ultrahigh-Rate Lithium Storage. Advanced Functional Materials, 26 (13). pp. 2198-2206. ISSN 1616-301X

Yum, Hyejung, Singer, Brian and Bacon, Anne (2009) Coniferous wood pulp in traditional Korean paper between the 15th and 18th centuries AD. Archaeometry, 51 (3). pp. 467-479. ISSN 0003-813X

Zhang, Aying, Lu, Haibao, Fu, Yong Qing and Li, Zhenghong (2017) Modeling and optimization of heat transfer in buckypaper reinforced polymer composite. Journal of Materials Science, 52 (13). pp. 8300-8310. ISSN 0022-2461

Zhang, Dan, Wang, Baoqi, Jiang, Yinzhu, Zhou, Peng, Chen, Zhihui, Xu, Ben and Yan, Mi (2015) Enhanced Electrocatalytic Performance of Co3O4/Ketjen-Black Cathodes for Li-O2 Batteries. Journal of Alloys and Compounds, 653. pp. 604-610. ISSN 0925-8388

Zhao, Benzhong, MacMinn, Christopher W., Primkulov, Bauyrzhan K., Chen, Yu, Valocchi, Albert J., Zhao, Jianlin, Kang, Qinjun, Bruning, Kelsey, McClure, James E., Miller, Cass T., Fakhari, Abbas, Bolster, Diogo, Hiller, Thomas, Brinkmann, Martin, Cueto-Felgueroso, Luis, Cogswell, Daniel A., Verma, Rahul, Prodanović, Maša, Maes, Julien, Geiger, Sebastian, Vassvik, Morten, Hansen, Alex, Segre, Enrico, Holtzman, Ran, Yang, Zhibing, Yuan, Chao, Chareyre, Bruno and Juanes, Ruben (2019) Comprehensive comparison of pore-scale models for multiphase flow in porous media. Proceedings of the National Academy of Sciences, 116 (28). pp. 13799-13806. ISSN 0027-8424

Zhao, Jianguo, Gulan, Utku, Horie, Takafumi, Ohmura, Naoto, Han, Jun, Yang, Chao, Kong, Jie, Wang, Steven and Xu, Bin (2019) Advances in Biological Liquid Crystals. Small, 15 (18). p. 1900019. ISSN 1613-6810

Zheng, Xu, Taverne, Mike, Ho, Daniel and Rarity, John (2018) Cavity Design in Woodpile Based 3D Photonic Crystals. Applied Sciences, 8 (7). ISSN 2076-3417

Zheng, Zhuang-Hao, Fan, Ping, Luo, Jing-Ting, Liang, Guang-Xing, Ma, Hongli, Zhang, Xianghua, Yang, Chang and Fu, Yong Qing (2018) High-performance p-type inorganic-organic hybrid thermoelectric thin films. Nanoscale, 10 (28). pp. 13511-13519. ISSN 2040-3364

Zhou, J., Wu, X. Z., Xiao, Dingbang, Zhuo, M., Jin, Hao, Jikui, Luo and Fu, Yong Qing (2017) Deposition of aluminum doped ZnO as electrode for transparent ZnO/Glass surface acoustic wave devices. Surface and Coatings Technology, 320. pp. 39-46. ISSN 0257-8972

Zhu, Chuang, Chalmers, Evelyn, Chen, Liming, Wang, Yuqi, Xu, Bin, Li, Yi and Lui, Xuqing (2019) A Nature-Inspired, Flexible Substrate Strategy for Future Wearable Electronics. Small, 15 (35). p. 1902440. ISSN 1613-6810

Zoppi, Guillaume and Beattie, Neil (2018) CZTSSe Solar Cells from Nanoparticle Inks. Impact, 2018 (9). pp. 41-43. ISSN 2398-7073

Book Section

Elmarakbi, Ahmed and Azoti, Wiyao (2018) State of the Art on Graphene Lightweighting Nanocomposites for Automotive Applications. In: Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and their Polymer Composites. Micro and Nano Technologies . Elsevier, pp. 1-23. ISBN 9780323480611

Hallal, Ali, Elmarakbi, Ahmed, Shaito, Ali and El-Hage, Hicham (2013) Overview of Composite Materials and their Automotive Applications. In: Advanced Composite Materials for Automotive Applications. Wiley, pp. 3-28. ISBN 9781118423868

Hu, Ning, Elmarakbi, Ahmed, Alamusi, , Liu, Yaolu, Fukunaga, Hisao, Atobe, Satoshi and Watanabe, Tomonori (2013) Numerical Simulation of Damages in FRP Laminated Structures under Transverse Quasi-Static or Low-Velocity Impact Loads. In: Advanced Composite Materials for Automotive Applications. Wiley-Blackwell, pp. 257-292. ISBN 9781118423868

Kapsali, Veronika (2012) Nature as paradigm for sustainability in the textile and apparel industry. In: The Sustainable Fashion Handbook. Thames and Hudson, London, pp. 278-283. ISBN 978-0500290569

Miles, Robert, Zoppi, Guillaume, Ramakrishna Reddy, Kotte and Forbes, Ian (2010) Thin film solar cells based on the use of polycrystalline thin film materials. In: Organic nanostructured thin film devices and coatings for clean energy. Handbook of nanostructured thin films and coatings, 3 . CRC Publications, London, pp. 1-56. ISBN 978-1420094350

Wang, Cong, Sridhar, Sreepathy, Terry, Jonathan, Sun, Ansu, Li, Zhenghong, Lu, Haibao, Xu, Bin and Li, Yifan (2019) Advanced 3D morphing transducers by smart hydrogel patterning. In: 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII (TRANSDUCERS and EUROSENSORS XXXIII): 23-27 June 2019, Berlin, Germany. IEEE, Piscataway, NJ, pp. 2508-2510. ISBN 9781538681053, 9781728120072

Report

Sarwar, Mohammed, Hellbergh, Hakan, Doraisingam, Anand Raj and Persson, Martin (2002) Simulation of the intermittent cutting action of a bandsaw blade. Technical Report. Society of Manufacturing Engineers.

Conference or Workshop Item

Bakalarou, Angelina and Theodorakopoulos, Charis (2015) Traditional and modern gel-based cleaning procedures on two typical 19th century panel paintings coated with aged natural resin varnishes. In: Conservation of Cultural Heritage: Challenges and Reviews, 25 - 29 May 2015, Athens.

Capper, Graham, Matthews, Jane and Lockley, Steve (2012) Incorporating embodied energy in the BIM process. In: CIBSE ASHRAE Technical Symposium, 18 - 19 April 2012, Imperial College, London, UK.

Coventry, Kathryn, Richardson, Alan, McIntyre, Chris and Aresh, Balaji (2011) Pullout Performance of Chemical Anchor Bolts in Fibre Concrete. In: Fibre Concrete 2011– 6th International Conference, 8-9 September 2011, Czech Technical University, Prague, Czech Republic.

Elmarakbi, Ahmed, Azoti, Wiyao, Martorana, Brunetto, Belingardi, Giovanni and Ciardiello, Raffaele (2015) Graphene-based composite materials for automotives. In: ICCM 2015 - 20th International Conference on Composite Materials, 19th - 24th July 2015, Copenhagen, Denmark.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2007) A new rate-dependent cohesive model for simulating dynamic composite delamination. In: ICCM-16 - 16th International Conference on Composite Materials, 8th - 13th July 2007, Kyoto, Japan.

Etor, David, Dodd, Linzi, Wood, David and Balocco, Claudio (2016) Metal-insulator-metal diodes fabricated on flexible substrates. In: IRMMW-THz 2016 - 41st International Conference on Infrared, Millimeter, and Terahertz waves, 25th - 30th September 2016, Copenhagen, Denmark.

Gao, Bin, Lu, Peng, Woo, Wai Lok and Tian, G. Y. (2018) Variational Bayes Sub-Group Adaptive Sparse Component Extraction for Diagnostic Imaging System. In: ICASSP 2018 - 2018 IEEE International Conference on Acoustics, Speech and Signal Processing, 15th - 20th April 2018, Calgary, Canada.

Haider, Julfikar and Hashmi, Mohammed (2008) Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008), 2-5 November 2008, Bahrain.

Inam, Fawad (2014) Carbon nanotechnology for future aerospace. In: International Conference on Nanomaterials and Nanotechnology 2014 (ICNN-2014), 7-9 April 2014, Karachi, Pakistan.

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Inam, Fawad and Okolo, Chichi (2016) Fullerenes for enhanced performance of novel nano-exploited aircraft materials. In: 14th Eurasia Conference on Chemical Sciences (EuAsC2S), 15th - 18th December 2016, Karachi, Pakistan.

Inam, Fawad, Okolo, Chichi and Vo, Thuc (2016) Damage sensing ability of polymer nanocomposites filled with long, shortened and damaged carbon nanotubes. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Inam, Fawad, Okolo, Chichi, Vo, Thuc and Iqbal, Sadia Sagar (2017) Engineering properties of graphene - ceramic nanocomposites by incorporating defects in graphene. In: WCSM-2017 - 3rd Annual World Congress of Smart Materials-2017, 16th - 18th March, 2017, Bangkok, Thailand.

Li, Binghui, Liu, Dejun, Semenova, Yuliya, Farrell, Gerald, Chan, Hau Ping and Wu, Qiang (2015) Investigation on stress/strain sensing characteristics for magnetorheological smart composite material by a SMS fiber structure. In: TENCON 2015 - IEEE Region 10 Conference, 1st - 4th November 2015, Macau, China.

Li, Yifan, McHale, Glen, Smith, S., Walton, Anthony and Xu, Ben (2015) Large Surface Strain Sensing Structures based on Elastic Instabilities. In: International Conference on Microelectronic Test Structures (ICMTS), March 23 - 26, 2015, Tempe, Arizona, US.

Luckert, Franziska, Yakushev, Michael, Martin, Robert, Beattie, Neil, Zoppi, Guillaume, Moynihan, Matthew and Forbes, Ian (2010) Optical properties of thin films of Cu2ZnSnSe4 fabricated by sequential deposition and selenisation. In: 6th Photovoltaic Science Applications and Technology (PVSAT-6), 1-3 April 2010, University of Southampton, United Kingdom.

Mollón, Victoria, Bonhomme, Jorge, Elmarakbi, Ahmed, Argüelles, Antonio and Viña, Jamie (2012) Numerical analysis of delamination growth in composite materials using Two Step Extension and Cohesive Zone methods. In: ECCM 2012 - 15th European Conference on Composite Materials: Composites at Venice, 24th - 28th June 2012, Venice, Italy.

Nwofe, Patrick, Ramakrishna Reddy, Kotte, Sreedevi, Gedi, Tan, John, Forbes, Ian and Miles, Robert (2011) Structural, optical and electro-optical properties of thermally evaporated SnS layers. In: 21st Photovoltaic Science and Engineering Conference, 28 November - 2 December 2011, Fukuoka, Japan.

Okolo, Chichi, Rutherford, Alan, Wood, Chris and Inam, Fawad (2016) Dynamic mechanical analyses for molecular level engineering of advanced subsea polymers. In: 3rd International Conference on Structural Nano Composites (NANOSTRUC 2016), 12-15 September, 2016, Aberdeen, UK.

Pesce, Giovanni, Ball, Richard, Grant, Robert, Yeandel, Stephen, Parker, Stephen and Molinari, Marco (2015) Experimental Investigation for the Development and Validation of Atomistic Models in Construction. In: 16th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 10th - 13th August 2015, Winnipeg.

Pesce, Giovanni, Ball, Richard, Parker, Stephen and Grant, Robert (2014) Lime Based Materials in Construction: Experimental investigations for the development and validation of atomic models. In: EFCECM 2014 - The International Conference on Environmentally Friendly Civil Engineering Construction and Materials, 13th - 14th November 2014, Manado, Indonesia.

Pesce, Giovanni, Ball, Richard, Serrapede, Mara and Denuault, Guy (2014) In situ monitoring of pH changes in concrete and lime mortars. In: 34th Annual Cement and Concrete Science Conference, 15th - 16th September 2014, Sheffield, UK.

Ramakrishna Reddy, Kotte, Prathap, Pathi and Miles, Robert (2009) Surface characterisation of spray deposited In2O3: MO films. In: 17th Interdisciplinary Surface Science Conference (ISSC 2009), 30 March - 2 April 2009, University of Reading, Berkshire.

Richards, Daniel and Amos, Martyn (2014) Evolving Morphologies with CPPN-NEAT and a Dynamic Substrate. In: ALIFE 2014 - Fourteenth International Conference on the Synthesis and Simulation of Living Systems, 30th July - 2nd August 2014, Manhattan, New York.

Richardson, Alan (2006) Control in Screed using A142 Steel Fabric or Mixed Structural Polypropylene Fibres. In: Concrete Communication Conference, 5-6 September 2010, University College London.

Richardson, Alan, Coventry, Kathryn and Diaz, Eli (2015) Rubber crumb used in concrete to provide freeze-thaw protection. In: Euro-Elecs-2015: Latin American and European Conference on Sustainable Buildings and Communities, 21-23 July 2015, Guimaraes.

Richardson, Alan, Coventry, Kathryn and Morgan, Miles (2011) Elevated temperature concrete curing - using polypropylene fibres. In: Fibre Concrete 2011 – 6th International Conference,, 8-9 September 2011, Czech Technical University, Prague, Czech Republic,.

Richardson, Alan, Coventry, Kathryn and Pienaar, Jaques (2011) The Potential for Achieving Freeze/Thaw Protection in Concrete through the addition of Rubber Crumb. In: First International Conference on Future Intermediate Sustainable Cities, a message for Future Generations, Smart Materials, 23-25 November 2010, British University in Egypt.

Richardson, Alan and Jackson, P. (2011) Equating steel and synthetic fibre concrete post crack performance. In: 2nd International Conference on Current Trends in Technology NUiCONE, 8-10 September 2011, Nirma University, Ahmedabad, India.

Richardson, Alan and Knapton, J. (2002) The Effect of Polypropylene Films on the Durability of Concrete. In: 2nd Material Specialty Conference of the Canadian Society for Civil Engineering, 5-8 June 2002, Montréal, Québec, Canada.

Roach, Paul, Newton, Michael and McHale, Glen (2008) Love wave sensors: Sectional guiding layers. In: 2008 IEEE International Frequency Control Symposium, 19-21 May 2008, Honolulu, Hawaii.

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In: ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering, 10th - 13th May 2016, Istanbul, Turkey.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Characteristics of tool cutting edges for coatability. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Evaluating the performance of TiN coating on a PM HSS milling cutter used in manufacturing of bandsaws. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Processing of epoxy/ graphene nanocomposites. In: 6th Chemical Nanoscience Symposium (CNSN-6), 17 March 2016, Newcastle upon Tyne.

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Reinforcement effect of graphene on the mechanical properties of epoxy. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Wells, Gary, Trabi, Christophe and Brown, Clifford (2010) Fast reconfigurable liquid optical interface: investigation of higher harmonics in the periodic liquid surface wrinkle. In: Micro-Optics 2010, 12th - 16th April 2010, Brussels, Belgium.

Xu, Ben (2016) Smart materials and technologies for future engineering. In: Newton Researcher Links Workshop on Energy and Environment, July 8-10 2016, Xi'an, China.

Xu, Ben (2016) A new microfluidic switch technique by controllably buckling Stimuli-responsive polyelectrolyte hydrogel thin layer. In: Polymer Networks Group meeting, 19th - 23rd June 2016, Stockholm.

Xu, Ben and Fu, Yong Qing (2010) Nano carbon filled smart materials: electrical, micro/nano mechanical properties and Nano-fabrication technique with FIB. In: ThinFilms2010, 11-14 July 2010, Harbin, China.

Xu, Ben and Fu, Yong Qing (2009) Polystyrene based shape memory nanocomposites. In: ICCM-17: 17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

Xu, Ben, Fu, Yong Qing and Huang, Wei Min (2013) Nanomechanics of shape memory polymer nanocomposites with carbon nanofibre and carbon nanotube. In: SMST- 2013: Shape Memory & Superelastic Technologies Conference, 20-24 May 2013, Prague, Czech Republic.

Xu, Ben, Fu, Yong Qing, Kraft, Arno, Reuben, Robert and Huang, Wei Min (2009) Polyurethane/nano-clay shape memory polymer nanocomposites. In: Hybrid Materials 2009: 1st International Conference on Multifunctional, Hybrid and Nanomaterials, 15-19 March 2009, Tours, France.

Xu, Ben and Hayward, Ryan (2012) Electrically activated soft surfaces by a low voltage. In: New.Mech2012: New England Workshop on the Mechanics of Materials and Structures, 3 November 2012, Brown University, Rhode Island, USA.

Xu, Ben and Hayward, Ryan (2013) Low voltage switching of crease patterns on gel surfaces with topographically patterned microelectrodes. In: APS March Meeting 2013, 18-23 March 2013, Baltimore, USA.

Xu, Ben and Hayward, Ryan (2012) Low-voltage switching of elastic instability patterns on hydrogel films: a new approach to soft active surfaces. In: 2012 MRS Fall Meeting, 25-30 November 2012, Boston, USA.

Xu, Ben, Wang, Ding, McHale, Glen, Kusumaatmaja, Halim, Wood, David and Cooke, Michael (2015) Mechanically tuning of the shape and controlling the motion of the droplet on a patterned elastic surface. In: Frontiers in Polymer Science Conference (POLY 2015), 20-22 May 2015, Italy.

Book

Elmarakbi, Ahmed (2013) Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley-Blackwell. ISBN 9781118423868

Richardson, Alan (2013) Re-use of materials and by-products in construction, waste minimisation and re-cycling. Green Energy and Technology . Springer, London. ISBN 978-1447153764

Thesis

Ahmadhasan, Sameer (2019) Flexible ZnO thin film-based surface acoustic wave devices for environmental and biomedical sensing applications. Doctoral thesis, Northumbria University.

Al-Maghalseh, Maher (2014) Compact solar thermal energy storage systems using phase change materials. Doctoral thesis, Northumbria University.

Guan, Jian (2017) Droplets on Low Friction Surfaces. Doctoral thesis, Northumbria University.

Ismail, Mohammad (2019) Intensification of heat transfer in thermal energy storage systems with phase change materials. Doctoral thesis, Nothumbria University.

Lu, Hui (2019) Assessing the impact of 3D printing adoption on the supply chain. Doctoral thesis, Northumbria University.

Pesce, Cecilia (2022) Tailoring lime properties to the modern construction industry. The effects of organic additives and alternative slaking methods on portlandite mineralogy. Doctoral thesis, Northumbria University.

Wang, Ding (2019) Mechanics study and application of micro-engineered smart surface. Doctoral thesis, Northumbria University.

Xu, Xinya (2019) Flexible Cu2ZnSn(S,Se)4 solar cells made from nanoparticle inks. Doctoral thesis, Northumbria University.

Patent

University of Sunderland, DELTA-TECH S.P.A., NANESA S.R.L. (2018) Method of Forming Graphene Nanoplatelets, Graphene Nanoplatelets So-Obtained and Composites Comprising Said Nanoplatelets. WO/2018/051095.

UMASS AMHERST (2015) Mechanically gated electrical switches by creasing of patterned metal/elastomer bilayer films. US20150294805.