Items where Subject is "H700 Production and Manufacturing Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 302.

A

Abbasi, Rabiya, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2022) An ontology model to represent aquaponics 4.0 system’s knowledge. Information Processing in Agriculture, 9 (4). pp. 514-532. ISSN 2214-3173

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2017) A Mixed Method Approach to Investigate the Lack of Lean Manufacturing Implementation in Libya. International Journal of Technology and Engineering Studies, 3 (3). pp. 111-116. ISSN 2414-0924

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2017) A Quantitative Study of the Barriers to Lean Manufacturing Implementation in Libya. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering . IOS Press, pp. 315-320. ISBN 978-1-61499-791-7

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2016) A proposed research methodology to investigate the lack of lean manufacturing implementation in Libyan manufacturing companies. In: EURO 2016 - 28th European Conference on Operational Research, 3rd - 6th July 2016, Poznań, Poland.

Abdullah, Albradan, Tan, Kian and Cheung, Wai Ming (2013) Factors Influence ISO 9000 Implementation in Saudi Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September 2013, Cranfield University.

Aftab, Mersha and James, Alana (2017) People as an essential tool for considering ethics in the product lifecycle. In: Design Management Academy Conference 2017, 7th - 9th June 2017, Hong Kong, China.

Agnew, Brian, Bughazem, Mohamed and Talbi, Mosbah (2009) Improvement of the single shaft combined cycle gas turbine power plant by intake air cooling using an absorption cooler. In: Heat Powered Cycles Conference 2009, 7-9 September, Berlin, Germany.

Agrawal, Prashant, Bhanushali, Sushrut, Gandhi, Prasanna S. and Neild, Adrian (2022) Capillary wave sieve: Continuous particle separation using millimeter-scale capillary waves. Physical Review Applied, 18 (5). 054070. ISSN 2331-7019

Ahmad Jamil, Muhammad, Goraya, Talha S., Ng, Kim Choon, Zubair, Syed M., Xu, Bin and Shahzad, Muhammad Wakil (2021) Optimizing the Energy Recovery Section in Thermal Desalination Systems for Improved Thermodynamic, Economic, and Environmental Performance. International Communications in Heat and Mass Transfer, 124. p. 105244. ISSN 0735-1933

Ahmadi, Fereshteh, Molewijk, E., Helmus, J. and RazaviAlavi, SeyedReza (2022) Key Result Indicators (KRIS) and Key Performance Indicators (KPIS) For Maintenance Management. In: 2022: The Digital Reality of Tomorrow. University of New Brunswick, Fredericton, Canada, pp. 1-9.

Ajao, Kajogbola R., Ibitoye, Segun E., Adesiji, Adedire D. and Akinlabi, Esther (2022) Design and Construction of a Low-Cost-High-Accessibility 3D Printing Machine for Producing Plastic Components. Journal of Composites Science, 6 (9). p. 265. ISSN 2504-477X

Akram, H. and Butt, Talib E. (2022) WET nexus between the three sectors – ‘waste to energy for transport’. Journal of Cleaner Production, 339. p. 130545. ISSN 0959-6526

Al-Maadeed, Somaya, Boubezari, Rayana, Kunhoth, Suchithra and Bouridane, Ahmed (2018) Robust feature point detectors for car make recognition. Computers in Industry, 100. pp. 129-136. ISSN 0166-3615

Al-Mijrab, Anwar Salih Ali (2011) An Investigation into the Difficulties Affecting the Adoption of ISO 9000, a Quality Management System, in Libyan Service and Manufacturing Industries. Doctoral thesis, Northumbria University.

Alaba, E. S., Akinlabi, Esther, Kazeem, R. A., Petinrin, A. S., Ikumapayi, M. O. and Jen, T.C. (2023) Evaluation of Palm Kernel Oil as Cutting Lubricant in Turning AISI 1039 Steel Using Taguchi-Grey Relational Analysis Optimization Technique. Advances in Industrial and Manufacturing Engineering, 6. p. 100115. ISSN 2666-9129

Ali, Abdalla, Birkett, Martin, Hackney, Philip and Bell, David (2016) Efficient nondominated sorting with genetic algorithm for solving multi-objective job shop scheduling problems. In: 2016 International Conference Multidisciplinary Engineering Design Optimization (MEDO). IEEE, Piscataway. ISBN 978-1-5090-2113-0

Ali, Abdalla, Hackney, Philip, Bell, David and Birkett, Martin (2014) Dynamic job shop scheduling with alternative routes based on genetic algorithm. In: Engineering Optimization. CRC Press (Taylor & Francis Group), Boca Raton, FL, pp. 827-832. ISBN 978-1-138-02725-1

Aljarany, Ali Abdulgader (2002) Studies of the degradation behaviour of Gamma-TiAl and Fe3Al intermetallics. Doctoral thesis, Northumbria University.

Allwood, Julian, Childs, Tom, Clare, Adam, De Silva, Anjali, Dhokia, Vimal, Hutchings, Ian, Leach, Richard, Leal-Ayala, David, Lowth, Stewart, Majewski, Candice, Marzano, Adelaide, Mehnen, Jörn, Nassehi, Aydin, Ozturk, Erdem, Raffles, Mark, Roy, Raj, Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Alsaifi, Khaled, Elnahass, Marwa and Salama, Aly (2020) Market responses to firms’ voluntary carbon disclosure: Empirical evidence from the United Kingdom. Journal of Cleaner Production, 262. p. 121377. ISSN 0959-6526

Alwan, Zaid and Ilhan Jones, Bahriye (2022) IFC-based embodied carbon benchmarking for early design analysis. Automation in Construction, 142. p. 104505. ISSN 0926-5805

Ameli, Masoud, Agnew, Brian, Leung, Pak Sing, Ng, Bobo, Sutcliffe, C. J., Singh, J. and McGlen, R. J. (2013) A novel method for manufacturing sintered aluminium heat pipes (SAHP). Applied Thermal Engineering, 52 (2). pp. 498-504. ISSN 1359-4311

Anthony, Catherine and Cheung, Wai Ming (2017) Cost Evaluation in Design for End-of-Life of Automotive Components. Journal of Remanufacturing, 7 (1). pp. 97-111. ISSN 2210-464X

Aso, Raymond and Cheung, Wai Ming (2015) Towards greener horizontal-axis wind turbines: Analysis of carbon emissions, energy and costs at the early design stage. Journal of Cleaner Production, 87. pp. 263-274. ISSN 0959-6526

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2002) Advanced Tools and Technologies for Collaborative Product Development and Knowledge Management. In: 18th National Conference on Manufacturing Research, 2nd - 4th September 2002, Leeds, UK.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) Open Standard, Open Source and Peer to Peer Methods for Collaborative Product Development and Knowledge Management. In: 12th Symposium of Product Data Technology EUROPE, 25th - 27th September 2003, Manchester.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2005) Open Standard, Open Source and Peer to Peer tools and methods for collaborative product development. Computers in Industry, 56. pp. 260-271. ISSN 0166-3615

B

Babaremu, Kunle, Olumba, Nmesoma, Chris-Okoro, Ikenna, Chuckwuma, Konyegwachie, Jen, Tien-Chien, Oladijo, Oluseyi and Akinlabi, Esther (2022) Overview of Solar–Wind Hybrid Products: Prominent Challenges and Possible Solutions. Energies, 15 (16). p. 6014. ISSN 1996-1073

Bai, Xin, Wan, Chaoying, Zhang, Yong and Zhai, Yinghao (2011) Reinforcement of hydrogenated carboxylated nitrile–butadiene rubber with exfoliated graphene oxide. Carbon, 49 (5). pp. 1608-1613. ISSN 0008-6223

Balaji, P.S., Moussa, Leblouba, Khandoker, Noman, Shyh, Ting Yuk, Rahman, Muhammad and Ho, Lau Hieng (2017) Experimental study on vertical static stiffnesses of polycal wire rope isolators. IoP Conference Series, Materials Science and Engineering, 217. 012032. ISSN 1757-8981

Baziar, Aliasghar, Akbarizadeh, Mohammad Reza, Hajizadeh, Amin, Marzband, Mousa and Bo, Rui (2020) A Robust Integrated Approach for Optimal Management of Power Networks Encompassing Wind Power Plants. IEEE Transactions on Industry Applications. ISSN 0093-9994 (In Press)

Bhinder, Majid A., Rahmati, Mohammad, Mingham, C.G. and Aggidis, G. A. (2015) Numerical hydrodynamic modelling of a pitching wave energy converter. European Journal of Computational Mechanics, 24 (4). pp. 129-143. ISSN 1779-7179

Birkett, Martin (2009) Optimisation of the performance characteristics of Cu-Al-Mo thin film resistors. Doctoral thesis, Northumbria University.

Birkett, Martin (2012) Optimization of the deposition and annealing of CuAIMo thin film resistors. In: Advances in Manufacturing Technology XXVI. Aston Business School, pp. 504-509. ISBN 978-1905866601

Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2006) Effects of annealing on the electrical properties of NiCr vs AlCu thin film resistors prepared by DC magnetron sputtering. In: Proceedings of the 20th Annual Passive Components Conference (CARTS 2006), Bad Homburg, Germany. ECA, Arlington, VA, USA, pp. 307-316. ISBN 978-0790801100

Birkett, Martin and Oxley, Stephen (2008) Discrete resistor technologies and potential future advancements. In: Proceedings of The 22nd annual Passive Components Conference (CARTS 2008). ECA, Arlington, VA, USA, pp. 115-140. ISBN 978-0790801216

Birkett, Martin and Oxley, Stephen (2013) Recent advancements in discrete resistor technologies. In: Resistors: Theory of Operation, Behavior and Safety Regulations. Nova Science Publishers, New York, pp. 53-98. ISBN 978-1-62257-788-0

Birkett, Martin and Penlington, Roger (2013) Laser trim pattern modelling and optimisation for CuAlMo thin film resistors. IEEE Transactions on Components, Packaging and Manufacturing Technology, 3 (3). pp. 523-529.

Birkett, Martin, Penlington, Roger, Wan, Chaoying and Zoppi, Guillaume (2013) Structural and electrical properties of CuAlMo thin films prepared by magnetron sputtering. Thin Solid Films, 540. pp. 235-241. ISSN 0040-6090

Bohemia, Erik, Lauche, Kristina and Harman, Kerry (2008) Issues related to conducting a global studio. In: 10th International Conference on Engineering and Product Design Education, 4-5 September 2008, Universitat Politecnia de Catalunya, Barcelona.

Bramall, David, McKay, Kevin, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Manufacturability analysis of early product designs. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 501-508. ISSN 0951-192X

Brock, Anke, Truillet, Phillipe, Oriola, Bernard, Picard, Delphine, Jouffrais, Christophe, Wintergerst, Götz, Jagodzinski, Ron, Giles, Peter, Choi, Sangwon, Gu, Jiseong, Han, Jaehyun, Heo, Seongkook, Kim, Sunjun, Lee, Geehyuk, Ronchi, Gloria and Benghi, Claudio (2013) Demo hour. interactions, 20 (1). pp. 10-11. ISSN 1072-5520

C

Chaal, Hamza and Jovanovic, Milutin (2009) Improved direct torque control using Kalman filter: application to a doubly-fed machine. In: 11th IASTED International Conference on Control and Applications (CA 2009), 13-15 July 2009, Cambridge, UK.

Chan, Lydia, Shyha, Islam, Dreyer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. In: 4th Asia Conference on Mechanical and Materials Engineering, 14-18 July 2016, Kuala Lumpur.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2017) Process Optimisation for Internal Cylindrical Rough Turning of Nickel Alloy 625 Weld Overlay. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 11 (4).

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2016) Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Chen, Haojie, Ding, Guofu, Zhang, Jian, Li, Rong, Jiang, Lei and Qin, Sheng-feng (2022) A filtering genetic programming framework for stochastic resource constrained multi-project scheduling problem under new project insertions. Expert Systems with Applications, 198. p. 116911. ISSN 0957-4174

Chen, Ling, Yuankui, Leng, Liu, Bin, Juan, Liu, Wan, Sheng-Peng, Tao, Wu, Yuan, Jinhui, Shao, Liyang, Gu, Guoqiang, Fu, Richard, Xu, Hengyi, Xiong, Yonghua, He, Xing-Dao and Wu, Qiang (2020) Ultrahigh-sensitivity label-free optical fiber biosensor based on a tapered singlemode- no core-singlemode coupler for Staphylococcus aureus detection. Sensors and Actuators B: Chemical, 320. p. 128283. ISSN 0925-4005

Chen, Minjie, Wan, Chaoying, Shou, Wenjuan, Zhang, Yinxi, Zhang, Yong and Zhang, Jianmin (2007) Effects of interfacial adhesion on properties of polypropylene/Wollastonite composites. Journal of Applied Polymer Science, 107 (3). pp. 1718-1723. ISSN 0021-8995

Cheung, Wai Ming (2009) Book review: Electronic Waste Management. Journal Of Engineering Manufacture - Part B, 223 (11). pp. 1505-1506. ISSN 0954-4054

Cheung, Wai Ming (2010) Integrated Product and Process Design and Development: The Product Realization Process. International Journal of Production Research, 48 (12). pp. 3713-3714. ISSN 0020-7543

Cheung, Wai Ming and Aso, Raymond (2015) A Quantitative Analysis System for Greener Wind Turbine Concept Selection. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Cheung, Wai Ming, Aziz, Hayder, Maropoulos, Paul and Gao, James (2002) Integration of a Manufacturing Model with State-of-the-art PDM System. In: 1st CIRP International Seminar in Digital Enterprise Technology, 16-17 September 2002, Durham.

Cheung, Wai Ming, Bramall, David, Maropoulos, Paul, Gao, James and Aziz, Hayder (2006) Organisational Knowledge Encapsulation and Re-use in Collaborative Product Development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X

Cheung, Wai Ming, Leong, Jun and Vichare, Parag (2017) Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products. Journal of Cleaner Production, 167. pp. 759-775. ISSN 0959-6526

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) The Application of Web-based Technologies in Product Data Management and Manufacturing Systems Interoperability and Data Exchange. In: 10th European Concurrent Engineering Conference, 14-16 April 2003, Plymouth.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) Knowledge-Enriched Product Data Management to Support Aggregate Process Planning. In: 1st International Conference on Manufacturing Research, 9th - 11th September 2003, Glasgow, UK.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2016) Ontological approach for organisational knowledge re-use in product developing environments. In: IEEE International Technology Management Conference 2005, 20-22 June 2005, Munich, Germany.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2004) Web-based Knowledge Management Methods for Collaborative Product Development. In: 2nd International Conference on Manufacturing Research, 1st - 3rd September 2004, Sheffield, UK.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) Workflow Activity Task Controller: an Approach to Distribute Knowledge and Information in Collaborative Product Development. In: 12th Symposium of Product Data Technology EUROPE, 25th - 27th September 2003, Manchester.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James X. and Aziz, Hayder (2004) A Framework for distributed Workflows, Peer-to-Peer and PLM/PDM collaborations to support OEMs and SMEs. In: 2nd International CIRP Seminar on Digital Enterprise Technology (DET04), 1 - 3 September 2004, Seattle, Washington USA.

Cheung, Wai Ming, Marsh, Robert, Newnes, Linda, Mileham, Antony and Lanham, John (2015) Cost Data Modelling and Searching to Support Low Volume, High Complexity, Long Life Defence Systems Development. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (5). pp. 835-846. ISSN 0954-4054

Cheung, Wai Ming, Mileham, Antony, Newnes, Linda, Marsh, Robert and Lanham, John (2011) Data-driven through-life costing to support product lifecycle management solutions in innovative product development. International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 122-142. ISSN 1743-5110

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2009) Data Modelling and Optimization in Cost Estimation for Innovative Low Volume Product Development. In: ICMR'09 - 7th International Conference on Manufacturing Research, 8th - 10th September 2009, Warwick, UK.

Cheung, Wai Ming and Pachisia, Vedant (2015) Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity. Resources, Conservation and Recycling, 101. pp. 34-41. ISSN 0921-3449

Cheung, Wai Ming, Pachisia, Vedant and Hasan, Reaz (2014) Facilitating Waste Paper Recycling and Remanufacturing via a Cost Modelling Approach. In: International Conference on Sustainable Design and Manufacturing, 28-30 April 2014, Cardiff University.

Cheung, Wai Ming, Tan, Kian, Tan, Swee and Sutton, Caroline (2013) Strategies for Implementing Activity-Based Costing in the UK Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September, Cranfield University.

Cheung, Wai Ming and Wallace, Kieran (2012) Design and development of an excavator mounted dust suppression system. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Cheung, Wai Ming, Zhao, Jie, Dorador-Gonzalez, Jesús Manuel and Young, Robert (2000) Linking Product Design and Manufacturing Capability through a Manufacturing Strategy Representation. In: CAPE2000 - 16th International Conference on Computer-Aided Production Engineering, 7th - 9th August 2000, Edinburgh, UK.

Corradi, Marco and Speranzini, Emanuela (2019) Post-Cracking Capacity of Glass Beams Reinforced with Steel Fibers. Materials, 12 (2). p. 231. ISSN 1996-1944

Cowlyn, Joe, Dai, Xuewu and Putrus, Ghanim (2016) Wireless sensor networks for in situ energy efficiency monitoring. In: 2016 International Conference for Students on Applied Engineering (ISCAE): 20-21 October 2016, Newcastle upon Tyne, UK. IEEE, Piscataway, pp. 484-490. ISBN 9781467390286, 9781467390538

D

Dai, Xuewu, Gao, Zhiwei, Breikin, Tim and Wang, Hong (2009) Zero assignment for robust H2/H∞ fault detection filter design. IEEE Transactions on Signal Processing, 57 (4). pp. 1363-1372. ISSN 1053-587X

Davidson, Adam and Hackney, Philip (2006) Introduction of CAD/CAM Technology into MKW Engineering. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Deng, Wei, Sun, Yajun, Yao, Xiaoxue, Subramanian, Karpagam, Ling, Chen, Wang, Hongbo, Chopra, Shauhrat S., Xu, Ben Bin, Wang, Jie-Xin, Chen, Jian-Feng, Wang, Dan, Amancio, Honeyfer, Pramana, Stevin, Ye, Ruquan and Wang, Steven (2022) Masks for COVID-19. Advanced Science, 9 (3). p. 2102189. ISSN 2198-3844

Dissanayake Mudiyanselage, Madhushan, Nguyen, Hoang, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Upasiri, Irindu, Rajanayagam, Heshachanaa and Suntharalingam, Thadshajini (2022) Prediction of shear capacity of steel channel sections using machine learning algorithms. Thin-Walled Structures, 175. p. 109152. ISSN 0263-8231

Dissanayake Mudiyanselage, Madhushan, Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, Konstantinos D., Nagaratnam, B. and Wanniarachchi, K.S. (2020) Numerical modelling and shear design rules of stainless steel lipped channel sections. Journal of Constructional Steel Research, 168. p. 105873. ISSN 0143-974X

Doraisingam, Anand Raj (2003) Simulation of the intermittent cutting action of a bandsaw blade. Doctoral thesis, Northumbria University.

Doukari, Omar and Greenwood, David (2020) Automatic generation of building information models from digitized plans. Automation in Construction, 113. p. 103129. ISSN 0926-5805

E

Ebrahim, Hesham (2019) The Aerodynamic Characteristics of Passenger Vehicles Operating in a Platoon. Doctoral thesis, Northumbria University.

Edmondson, Vikki, Ardill, Owen, Martin, James, Lim, Michael, Kane, Malal and Woodward, John (2022) Quantifying long-term rates of texture change on road networks. International Journal of Pavement Engineering, 23 (6). pp. 1957-1969. ISSN 1029-8436

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2019) Modelling of the temperature and residual stress fields during 3D printing of polymer composites. International Journal of Advanced Manufacturing Technology, 104 (5-8). pp. 1661-1676. ISSN 0268-3768

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2015) A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs). In: MMIRA Asia Regional Conference, 19 - 20 September 2015, Osaka.

Erfanian Nakhchi Toosi, Mahdi and Esfahani, J.A. (2020) CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert. Powder Technology, 367. pp. 877-888. ISSN 0032-5910

Erfanian Nakhchi Toosi, Mahdi and Rahmati, Mohammad (2020) Turbulent Flows inside Pipes Equipped with Novel Perforated V-shaped Rectangular Winglet Turbulators: Numerical Simulations. Journal of Energy Resources Technology, 142 (11). p. 112106. ISSN 0195-0738

F

Fargani, Haitem (2017) A framework incorporating lean six sigma and life-cycle assessment in sustainable manufacturing. Doctoral thesis, Northumbria University.

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2017) A Proposed Implementation Process for a Sustainable Manufacturing Framework. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 365-370. ISBN 978-1-61499-791-7

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2018) Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants. International Journal of Manufacturing Technology and Management (IJMTM), 32 (3). pp. 297-311. ISSN 1368-2148

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2015) An approach to achieve operational effectiveness and sustainability requirements in manufacturing. In: International Conference on Manufacturing Research (ICMR2015), 8 - 10 September, 2015, Bath.

Fargani, Haitem, Cheung, Wai Ming, Hasan, Reaz and Birkett, Martin (2014) An integrated approach incorporating lean six sigma and life cycle assessment to support sustainable manufuacturing. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 227-231. ISBN 978-0-9926958-4-2

Farokhi, Hamed, Tavallaeinejad, Mohammad and Païdoussis, Michael P. (2021) Geometrically exact dynamics of cantilevered pipes conveying fluid. Journal of Fluids and Structures, 106. p. 103364. ISSN 0889-9746

Frydrych, Martin, Wan, Chaoying, Stengler, Ralph, O'Kelly, Kevin and Chen, Biqiong (2011) Structure and mechanical properties of gelatin/sepiolite nanocomposite foams. Journal of Materials Chemistry, 21 (25). pp. 9103-9111. ISSN 0959-9428

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Alzahrani, Bandar (2020) Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International Journal of Advanced Manufacturing Technology, 107 (7-8). pp. 3169-3183. ISSN 0268-3768

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Saharudin, Mohd Shahneel (2019) Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites. Nanomaterials, 9 (7). p. 917. ISSN 2079-4991

Funari, V., Gomes, H. I., Cappelletti, M., Fedi, S., Dinelli, E., Rogerson, Michael, Mayes, W. M. and Rovere, M. (2019) Optimization Routes for the Bioleaching of MSWI Fly and Bottom Ashes Using Microorganisms Collected from a Natural System. Waste and Biomass Valorization, 10 (12). pp. 3833-3842. ISSN 1877-2641

G

Gallimore, Alexandra and Cheung, Wai Ming (2016) Effects of Environmental Impact Based on Alternative Materials and Process Selection in Automotive Components Design. Journal of Industrial and Production Engineering, 33 (5). pp. 321-338. ISSN 2168-1015

Gao, James, Aziz, Hayder, Maropoulos, Paul and Cheung, Wai Ming (2003) Application of Product Data Management Technologies for Enterprise Integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X

Gao, Zhiwei, Nguang, Sing Kiong and Kong, De-Xing (2019) Advances in Modelling, Monitoring, and Control for Complex Industrial Systems. Complexity, 2019. ISSN 1076-2787

Gariani, Salah, El-Sayed, Mahmoud Ahmed and Shyha, Islam (2021) Optimisation of cutting fluid concentration and operating parameters based on RSM for turning Ti–6Al–4V. International Journal of Advanced Manufacturing Technology, 117 (1-2). pp. 539-553. ISSN 0268-3768

Gariani, Salah, Shyha, Islam and Inam, Fawad (2016) Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Gariani, Salah, Shyha, Islam, Jackson, Connor and Inam, Fawad (2017) Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid. In: Manufacturing Sciences and Technologies VII. Materials Science Forum (882). Trans Tech Publications, pp. 36-40. ISBN 9783038357322

Giannakis, Iraklis, Zhou, Feng, Warren, Craig and Giannopoulos, Antonios (2022) On the Limitations of Hyperbola Fitting for Estimating the Radius of Cylindrical Targets in Nondestructive Testing and Utility Detection. IEEE Geoscience and Remote Sensing Letters, 19. pp. 1-5. ISSN 1545-598X

Gouda, M. M., Danaher, Sean and Underwood, Chris (2001) Thermal comfort based fuzzy logic control. Building Services Engineering Research and Technology, 22 (4). pp. 237-253. ISSN 0143-6244

H

Hackney, Philip (2006) Analysis of the application of the "digital light" rapid prototyping processing for functional rapid manufactured components. In: 7th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 22 June 2006, High Wycombe.

Hackney, Philip (2004) The Application of the Z-Corps 3D-Printing System for the Manufacture of Rapid Tooling inserts, for the Production Polymer Injection Moulded Parts. In: Time Compression Technologies Conference, 15th September 2004, Birmingham.

Hackney, Philip (2001) Operating Characteristics of the Z-Corps 3D Printing Process. In: Conference on Materials Research, 20th September 2001, Cardiff.

Hackney, Philip (2001) Reverse Engineering: A Simple Concept, A Complex Process. In: Time Compression Technologies Conference, 17th October 2001, Manchester.

Hackney, Philip (2003) A Study of Build Accuracy of the Z-Corps 3D Printing Technique and Related Seepage Control. In: 4th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 19th June 2003, High Wycombe.

Hackney, Philip (2007) An investigation into the characteristics of materials and processes, for the production of accurate direct parts and tools using 3D rapid prototyping technologies. Doctoral thesis, Northumbria University.

Hackney, Philip and Ainsley, Christopher (2011) Rapid manufacturing- state of the art, analysis and future perspectives. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Hackney, Philip, Arulraj, A. C. and Chinnaswamy, G. K. (2005) Investigation into the EnvisionTec PerFactory® Rapid Prototyping Process for Production of Accurate and Strong Functional Parts. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip, Chinnaswamy, G. K. and Arulraj, A. C. (2005) Development of a Build Monitoring System for the EnvisionTec PerFactory Rapid Prototyping Process. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip, Chinnaswamy, G. K., Arulraj, A. C. and Nair, B. T. (2005) Investigation into Surface Finish of Parts Built by the EnvisionTec PerFactory Rapid Prototyping Process. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip and Curry, Paul (2011) A case study of the benefits and conflicts of knowledge between industry, academia and government. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Hackney, Philip, Foster, Laurence, Viney, Adam and Kelly, Kenneth (2021) Building additive manufacturing - a materials evaluation. International Journal of Rapid Manufacturing, 10 (1). pp. 69-79. ISSN 1757-8817

Hackney, Philip and Oppon, Charles (2020) Fatigue Analysis of Additive Manufactured Long Fibre Reinforced Nylon Materials. Procedia CIRP, 51. pp. 678-683. ISSN 2212-8271

Hackney, Philip and Pancholi, Ketan (2004) Analysis of the application of the Z-Corps three-dimensional printing system for rapid tooling for plastic injection moulded components. In: Fifth National Conference on Rapid Design, Prototyping, and Manufacturing. Wiley-Blackwell, Oxford, pp. 3-11. ISBN 978-1860584657

Hackney, Philip and Pancholi, Ketan (2004) Application of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacement. In: Fifth National Conference on Rapid Design, Prototyping, and Manufacturing. Wiley-Blackwell, Oxford, pp. 53-60. ISBN 978-1860584657

Hackney, Philip and Sarwar, Mohammed (2003) An Evaluation of Rapid Prototyping “Concept Modelling” Techniques for New Product Development. In: 13th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2003), 18th June 2003, Tampa.

Hackney, Philip and Sarwar, Mohammed (1997) Getting started in Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip and Sarwar, Mohammed (2006) Rapid Manufacturing of Polymer Injection Mould Tool Inserts for Prototype Tooling Production. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip and Sarwar, Mohammed (2001) The Revolution of Mid-Range Low Cost 3D Solid Modellers to Small Engineering Companies within the UK. In: 11th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 16-18 July 2001, Dublin.

Hackney, Philip and Sarwar, Mohammed (1997) Thermal and Mechanical Characteristics of the Laminated Object Manufacturing Process used for Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip, Sarwar, Mohammed and Widdows, Stephen (1997) Spin casting of metal parts directly from RP masters. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Implementing Time Compression Technologies to Assist Small to Medium Size Enterprises for Product Development. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2006) Product Enhancement with a systems approach, utilising Time Compression Technologies. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Reverse Engineering – Speeds up manufacture of thermoforming tools. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Hackney, Philip and Wooldridge, Richard (2017) 3D Sand Printing for Automotive Mass Production Applications. International Journal of Rapid Manufacturing, 6 (3). pp. 134-154. ISSN 1757-8817

Hackney, Philip, Wooldridge, Richard and Connor, Chris (2017) Optimisation of Additive Manufactured Sand Printed Mould Material for Aluminium Castings. Procedia Manufacturing, 11. pp. 457-465. ISSN 2351-9789

Haider, Julfikar and Hashmi, Mohammed (2010) Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process. Advanced Materials Research, 83-86. pp. 977-984. ISSN 1022-6680

Haider, Julfikar and Sarwar, Mohammed (2012) Selection of advanced coating on a milling cutter used for manufacturing saw teeth. International Journal of Surface Science and Engineering, 6 (1/2). pp. 45-58. ISSN 1749-785X

Hajirasouliha, Farzaneh and Zabiegaj, Dominika (2021) Is the shape of air particulate matter important? A study on the interactions of the two shapes of titanium dioxide nanoparticles with a model of pulmonary surfactant. In: UK Fluids Conference 8th-10th September 2021: Book of Abstracts. University of Southampton, Southampton, p. 64.

Fendor Limited, Hall Nichola, Smith Martin, Duffy Chris, Lievesley Matthew, Redhead, Paul, Smith, Neil (2011) A Motorized Drive Mechanism. WO 2011/030141 A1.

Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2013) A novel methodology to ascertain the heating mechanism of steel wire during annealing in a tube furnace. In: ICMR2013: International Conference on Manufacturing Research, 19-20 Sept 2013, Cranfield University, UK.

Haworth, Luke, Yang, Deyu, Agrawal, Prashant, Torun, Hamdi, Hou, Xianghui, McHale, Glen and Fu, Yong Qing (2023) Reduction of Ice Adhesion on Nanostructured and Nanoscale Slippery Surfaces. Nanotechnology and Precision Engineering, 6 (1). 013007. ISSN 2589-5540

He, Guanyu, He, Yuxin, Liu, Hu and Guo, Zhanhu (2023) Engineering integrated multimodal sensing and feedback ring system for advanced interactive metaverse platform. Science Bulletin, 68 (2). pp. 133-135. ISSN 2095-9273

He, Pengwei, Hu, Guangji, Wang, Chang, Hewage, Kasun, Sadiq, Rehan and Feng, Haibo (2021) Analyzing present and future availability of critical high-tech minerals in waste cellphones: A case study of India. Waste Management, 119. pp. 275-284. ISSN 0956-053X

Hewitt, Ian (2011) Creating graphene from graphite. [Artefact] (Unpublished)

Holla, Katarina, Simonova, Maria, Kandrac, Jan, Maly, Stanislav and Collins, Andrew (2015) Results and Conclusions of the Project "Complex Model for Risk Assessment and Treatment in Industrial Processes". Communications: Scientific Letters of the University of Zilina, 17 (1). pp. 46-51. ISSN 1335-4205

Hosseini Biroun, Seyedmehdi, Haworth, Luke, Agrawal, Prashant, Orme, Bethany, McHale, Glen, Torun, Hamdi, Rahmati, Mohammad and Fu, Yong Qing (2021) Surface Acoustic Waves to Control Droplet Impact onto Superhydrophobic and Slippery Liquid-Infused Porous Surfaces. ACS Applied Materials & Interfaces, 13 (38). pp. 46076-46087. ISSN 1944-8244

Hosseinibiroun, Mehdi Hosseini (2021) Numerical and experimental investigation of droplet actuation by surface acoustic waves. Doctoral thesis, Northumbria University.

I

Ibude, Ikechukwu, Hasan, Reaz, Fargani, Haitem, Ozoemena, Matthew and Cheung, Wai Ming (2014) Sustainability analysis of Palm oil vs. Jatropha. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 265-270. ISBN 978-0-9926958-4-2

Ikumapayi, Omolayo M., Kazeem, Rasaq A., Popoola, Lekan T., Laseinde, Opeyeolu T., Afolalu, Sunday A., Nwala, Nnamdi C., Akinlabi, Stephen and Akinlabi, Esther (2022) Development and assessment of African star seed (Chrysophyllum albidum) oil-based cutting fluid in turning AA6061 using Taguchi grey relational approach. International Journal on Interactive Design and Manufacturing (IJIDeM). ISSN 1955-2513 (In Press)

Imam, Habiba Zahir, Zheng, Yufan, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2021) Vision-Based Damage Localization Method for an Autonomous Robotic Laser Cladding Process. Procedia CIRP, 104. pp. 827-832. ISSN 2212-8271

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Inman, Ian (2004) Compacted oxide layer formation under conditions of limited debris retention at the wear interface during high temperature sliding wear of superalloys. Doctoral thesis, Northumbria University.

J

Jamali, Armin, Mendes, Joao, Nagaratnam, Brabha and Lim, Michael (2022) A new four stage model of capillary pressure in early age concrete: Insights from high capacity tensiometers. Cement and Concrete Research, 161. p. 106955. ISSN 0008-8846

Jiang, Haifan, Qin, Sheng-feng, Fu, Jianlin, Zhang, Jian and Ding, Guofu (2021) How to model and implement connections between physical and virtual models for digital twin application. Journal of Manufacturing Systems, 58 (Part B). pp. 36-51. ISSN 0278-6125

Jing, Xinyi, Li, Yingchun, Zhu, Jiahua, Chang, Lei, Maganti, Srihari, Naik, Nithesh, Xu, Bin, Murugadoss, Vignesh, Huang, Mina and Guo, Zhanhu (2022) Improving thermal conductivity of polyethylene/polypropylene by styrene-ethylene-propylene-styrene wrapping hexagonal boron nitride at the phase interface. Advanced Composites and Hybrid Materials, 5 (2). pp. 1090-1099. ISSN 2522-0128

Johansson, Therese, Moehler, Robert and Vahidi, Ramesh (2013) Knowledge sharing strategies for Project Knowledge Management in the automotive sector. Procedia - Social and Behavioral Sciences, 74. pp. 295-304. ISSN 1877-0428

K

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Procedia Engineering, 132. pp. 569-576. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) Meshfree formulation for modelling of orthogonal cutting of composites. Composite Structures, 166. pp. 193-201. ISSN 0263-8223

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Kamnis, S., Sfikas, A. K., Gonzalez Sanchez, Sergio, Karantzalis, A. E. and Georgatis, Ε. (2023) A New Cooling-Rate-Dependent Machine Learning Feature for the Design of Thermally Sprayed High-Entropy Alloys. Journal of Thermal Spray Technology, 32 (2-3). pp. 401-414. ISSN 1059-963

Karantzalis, Alexandros E., Poulia, Anthoula, Kamnis, Spyros, Sfikas, Athanasios, Fotsis, Anastasios and Georgatis, Emmanuel (2022) Modification of Cantor High Entropy Alloy by the Addition of Mo and Nb: Microstructure Evaluation, Nanoindentation-Based Mechanical Properties, and Sliding Wear Response Assessment. Alloys, 1 (1). pp. 70-92. ISSN 2674-063X

Kazeem, Rasaq A., MPetinrin, Moses O., Akhigbe, Peter O., Jen, Tien-Chien, Akinlabi, Esther, Akinlabi, Stephen and Ikumapayi, Omolayo M. (2023) Forecast of the Trend in Sales Data of a Confectionery Baking Industry Using Exponential Smoothing and Moving Average Models. Mathematical Modelling of Engineering Problems, 10 (1). pp. 1-23. ISSN 2369-0739

Khan, Irfan, Iqbal, Atif, Sanjeevikumar, P., Mitolo, Massimo, Shahidehpour, Mohammad, Guerrero, Josep M., Holm-Nielsen, Jens Bo, Lam, John and Marzband, Mousa (2022) Guest Editorial: Fast, Superfast, and Ultra-Superfast Intelligent and Smart Charging Solutions for Electric Vehicles. IEEE Transactions on Industry Applications, 58 (5). 5518 -5519. ISSN 0093-9994

WWB Services Ltd (2008) International Patent describing a novel Wheelchair Storage System for public environments. WO 2008/040948 A1.

Kunju, Firoz Khan Fasuludeen, Naveed, Nida, Anwar, Naveed and Ul Haq, Mir Irfan (2021) Production and Maintenance in Industries: Impact of Industry 4.0. Industrial Robot, 49 (3). pp. 461-475. ISSN 0143-991X

L

Lauche, Kristina, Bohemia, Erik, Badke-Schaub, Petra, Wilson, Colin, Langeveld, Lau, Connor, Chris and Titley, Will (2007) Distributed design studio: evaluation of three way collaboration. In: Shaping the Future: the 9th International Conference on Engineering and Product Design Education (EPDE), 13-14 September 2007, Northumbria University, Newcastle upon Tyne.

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 1: Mechanical Properties. Journal of Manufacturing Science and Engineering, 142 (10). p. 100801. ISSN 1087-1357

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 2: Micromachining. Journal of Manufacturing Science and Engineering, 142 (10). p. 100802. ISSN 1087-1357

Le, Doan Quoc Bao (2021) Micromachining of carbon nanofiller reinforced polymern nanocomposites. Doctoral thesis, Northumbria University.

Leong, Jun and Cheung, Wai Ming (2017) Cross-Functional Mapping to Link Lean Manufacturing and Life Cycle Assessment in Environmental Impact Reduction. In: Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies, 68 . Springer, London, pp. 421-431. ISBN 9783319570778

Li, Chunchun, Meng, Yingzhi, Hou, Hongping, Zhang, Amei, Khaliq, Jibran, Liao, Na, Fu, Caixia, Liu, Laijun and Du, Hongliang (2023) Synthesis, crystal structure, and characterization of Na2SrV4O12: A low‐firing dielectric vanadate. Journal of the American Ceramic Society, 106 (6). pp. 3501-3508. ISSN 0002-7820

Li, Chunchun, Yin, Changzhi, Deng, Ming, Shu, Longlong and Khaliq, Jibran (2020) Tunable microwave dielectric properties in SrO‐V2O5 system through compositional modulation. Journal of the American Ceramic Society, 103 (4). pp. 2315-2321. ISSN 0002-7820

Li, Chunchun, Yin, Changzhi, Khaliq, Jibran and Liu, Laijun (2021) Ultralow-Temperature Synthesis and Densification of Ag2CaV4O12 with Improved Microwave Dielectric Performances. ACS Sustainable Chemistry and Engineering, 9 (43). pp. 14461-14469. ISSN 2168-0485

Li, Gendao, Reimann, Marc and Zhang, Weihua (2018) When remanufacturing meets product quality improvement: the impact of production cost. European Journal of Operational Research, 271 (3). pp. 913-925. ISSN 0377-2217

Li, Xiang, Zhu, Yaofeng, Liu, Xuqing, Xu, Bin and Ni, Qingqing (2020) A broadband and tunable microwave absorption technology enabled by VGCFs/PDMS–EP shape memory composites. Composite Structures, 238. p. 111954. ISSN 0263-8223

Liu, Dongjie, Li, Yong, Liu, Fei, Zhou, Wenjing, Sun, Ansu, Liu, Xiaoteng, Chen, Fei, Xu, Bin and Wei, Jinjia (2020) Interfacial Interaction Enhanced Rheological Behavior in PAM/CTAC/Salt Aqueous Solution—A Coarse-Grained Molecular Dynamics Study. Polymers, 12 (2). p. 265. ISSN 2073-4360

Liu, Henry, Love, Peter, Smith, Jim, Irani, Zahir, Hajli, Nick and Sing, Michael (2018) From Design to Operations: A Process Management Life-Cycle Performance Measurement System for Public-Private Partnerships. Production Planning & Control, 29 (1). pp. 68-83. ISSN 0953-7287

Liu, Zheng-Da, Liu, Bin, Liu, Juan, Fu, Yanjun, Wang, Mengyu, Wan, Sheng-Peng, He, Xingdao, Yuan, Jinhui, Chan, Hau-Ping and Wu, Qiang (2020) Sensing Characteristics of Fiber Fabry-Perot Sensors Based on Polymer Materials. IEEE Access, 8. pp. 171316-171324. ISSN 2169-3536

Love, Peter, Irani, Zahir, Smith, Jim, Regan, Michael and Liu, Henry (2017) Cost Performance of Public Infrastructure Projects: The Nemesis and Nirvana of Change-Orders. Production Planning & Control, 28 (13). pp. 1081-1092. ISSN 1366-5871

M

Maheri, Alireza and Isikveren, Askin (2013) Educated search-A generic platform for partial modification at conceptual design phase of multidisciplinary problems. Computer-Aided Design, 45 (6). pp. 991-1004. ISSN 0010-4485

Maropoulos, Paul, Bramall, David, Chapman, Peter, Cheung, Wai Ming, McKay, Kevin and Rogers, Brian (2006) Digital Enterprise Technology in Production Networks. International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 911-916. ISSN 0268-3768

Martinez, Victor, English, Stuart and Conti, Matteo (2012) Sustainable car life cycle design, taking inspiration from natural systems and thermodynamics. In: EFEA 2012: 2nd International Symposium On Environment Friendly Energies And Applications, 25-24 June 2012, Northumbria University, Newcastle upon Tyne, UK.

Martinez Rodriguez, Pablo and Ahmad, Rafiq (2021) Quantifying the Impact of Inspection Processes on Production Lines through Stochastic Discrete-Event Simulation Modeling. Modelling, 2 (4). pp. 406-424. ISSN 2673-3951

Martinez Rodriguez, Pablo, Al-Hussein, Mohamed and Ahmad, Rafiq (2022) A cyber-physical system approach to zero-defect manufacturing in light-gauge steel frame assemblies. Procedia Computer Science, 200. pp. 924-933. ISSN 1877-0509

Martinez Rodriguez, Pablo, Vargas-Martinez, Adriana, Roman-Flores, Armando and Ahmad, Rafiq (2020) A science mapping study on learning factories research. Procedia Manufacturing, 45. pp. 84-89. ISSN 2351-9789

Mbikan, Atainu (2019) Mathematical modelling of a small biomass gasifier for synthesis gas production. Doctoral thesis, Northumbria University.

McKay, Kevin, Bramall, David, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Design Change Impact Analysis during Early Design Specification. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 598-604. ISSN 0951-192X

Meng, Han, Elmadih, Waiel, Jiang, Huan, Lawrie, Tristan, Chen, Yanyu and Chronopoulos, Dimitrios (2021) Broadband vibration attenuation achieved by additively manufactured 3D rainbow hollow sphere foams. Applied Physics Letters, 119 (18). p. 181901. ISSN 0003-6951

Mikhaylov, Roman, Martin, Mercedes Stringer, Dumcius, Povilas, Wang, Hanlin, Wu, Fangda, Zhang, Xiaoyan, Alghamdi, Fahad, Akhimien, Victory, Sun, Chao, Clayton, Aled, Fu, Richard, Ye, Lin, Dong, Zhiqiang and Yang, Xin (2021) A Reconfigurable and Portable Acoustofluidic System Based on Flexible Printed Circuit Board for the Manipulation of Microspheres. Journal of Micromechanics and Microengineering, 31 (7). 074003. ISSN 0960-1317

Mofolasayo, Adekunle, Young, Steven, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2022) How to adapt lean practices in SMEs to support Industry 4.0 in manufacturing. Procedia Computer Science, 200. pp. 934-943. ISSN 1877-0509

Muhamad Ibrahim, Sifan, Perampalam, Gatheeshgar, Nagaratnam, Brabha, Poologanathan, Keerthan, Navaratnam, Satheeskumar, Thamboo, Julian and Corradi, Marco (2022) Shear performance of lightweight concrete filled hollow flange cold-formed steel beams. Case Studies in Construction Materials, 17. e01160. ISSN 2214-5095

Musselwhite, Daniel, Gledson, Barry and Greenwood, David (2021) Matters Affecting Construction Project-Level Planning Effectiveness: A Literature Review. In: Proceedings of the 37th Annual ARCOM Conference, 6-7 September 2021. Association of Researchers in Construction Management (ARCOM), Leeds, pp. 542-551. ISBN 9780995546356

N

Nabhani, Farhad, Uhl, Christian, Kauff, Florian and Shokri, Alireza (2018) Purchasing manages and optimises existing product variance. Journal of Manufacturing Technology Management, 29 (3). pp. 430-448. ISSN 1741-038X

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Aeromechanical Analysis of a Complete Wind Turbine Using Nonlinear Frequency Domain Solution Method. Journal of Engineering for Gas Turbines and Power, 143 (1). 011018. ISSN 0742-4795

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming and Goh, Yee Mey (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer, London, pp. 135-151. ISBN 978-1441983213

Nezami, Mehran, Cheung, Wai Ming and Mansi, Safwat (2012) Adoption of Open Source and conventional ERP solutions for small and medium enterprises in manufacturing. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Niu, Xiaojing and Qin, Sheng-feng (2021) Integrating crowd-/service-sourcing into digital twin for advanced manufacturing service innovation. Advanced Engineering Informatics, 50. p. 101422. ISSN 1474-0346

Nozawa, Naoiki, Shum, Hubert, Ho, Edmond and Morishima, Shigeo (2020) Single Sketch Image based 3D Car Shape Reconstruction with Deep Learning and Lazy Learning. In: Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (VISIGRAPP 2020) - Volume 1: GRAPP. SciTePress, pp. 179-190. ISBN 9789897584022

O

Onalaja, Afolabi Aderemi (2023) Improving costing in infrastructure projects to accommodate uncertainties. Doctoral thesis, Northumbria University.

Oppon, Charles (2016) An Investigation into the Characteristics of Polyurethane Foam for Medical Applications Produced Using Additive Manufacturing Technology. Doctoral thesis, Northumbria University.

Oppon, Charles, Hackney, Philip, Shyha, Islam and Beeby, James (2014) Advances in Additive Manufacturing Processes. In: 3rd Applied Research Conference in Africa, 7 - 9 August 2014, Accra, Ghana.

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1565-1577. ISSN 0268-3768

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2013) A Review of Life Cycle Assessment of Renewable Energy Systems. In: 11th International Conference on Manufacturing Research, 19 - 20 September 2013, Cranfield University.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.

P

Penlington, Roger (2000) Surface engineering in the glass container industry. Vacuum, 56 (3). pp. 179-183. ISSN 0042-207X

Perera, Noel and Hasan, Reaz (2005) CFD modelling of cooling air in the NNPB process for glass container production. In: 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2005, 19th -22th September 2005, Cairo, Egypt.

Pesce, Cecilia, Pesce, Giovanni, Molinari, Marco and Richardson, Alan (2021) Effects of organic additives on calcium hydroxide crystallisation during lime slaking. Cement and Concrete Research, 139. p. 106254. ISSN 0008-8846

Prathap, Pathi, Revathi, Naidu, Ramakrishna Reddy, Kotte and Miles, Robert (2009) Thickness dependence of structure and optoelectronic properties of In2O3:Mo films prepared by spray pyrolysis. Thin Solid Films, 518 (4). pp. 1271-1274. ISSN 0040-6090

Pratumnopharat, Panu and Leung, Pak Sing (2011) Validation of various windmill brake state models used by blade element momentum calculation. Renewable Energy, 36 (11). pp. 3222-3227. ISSN 0960-1481

Q

Qian, Ying, Zheng, Wei, Chen, Wenge, Feng, Tao, Liu, Xiaoteng and Fu, Richard (2021) Enhanced functional properties of CeO2 modified graphene/epoxy nanocomposite coating through interface engineering. Surface and Coatings Technology, 409. p. 126819. ISSN 0257-8972

Qu, Yongtao, Chen, Lei, Zhang, Ruiqi, Cao, Xing and Liu, Xuebing (2022) Thermally-induced flexible and thermally conductive enhanced phase change material with 1-hexadecanol as phase change component. Composites Part A: Applied Science and Manufacturing, 163. p. 107205. ISSN 1359-835X

R

Rae, Duncan, Gledson, Barry and Littlemore, Michelle (2019) BIM and its impact upon project success outcomes from a Facilities Management perspective. In: Advances in ICT in Design, Construction and Management in Architecture, Engineering, Construction and Operations (AECO): Proceedings of the 36th CIB W78 2019 Conference. Northumbria University, Newcastle upon Tyne, pp. 508-517. ISBN 9781861354877, 9781861354860

Rahman, Muhammad, Boon, Ang Lye, Muntohar, Agus Setyo, Hashem Tanim, Md Nafeez and Pakrashi, Vikram (2014) Performance of masonry blocks incorporating Palm Oil Fuel Ash. Journal of Cleaner Production, 78. pp. 195-201. ISSN 0959-6526

Rasheed, Aatif, Combrinck, Madeleine, Khaliq, Jibran, Martin, James, Hassanin, Ahmed, Shehata, Nader, Elnabawy, Eman and Shyha, Islam (2021) Study of Air Pressure and Velocity for Solution Blow Spinning of Polyvinylidene Fluoride Nanofibres. Processes, 9 (6). p. 1014. ISSN 2227-9717

Rodgers, Paul (1992) Product Quality Assessment. Technical Report. University of Westminster, London.

Rodgers, Paul (1992) What is product design engineering? Technical Report. University of Westminster, London.

Rodgers, Paul and Patterson, Alistair (1992) An abstract model of the design and manufacture process. Technical Report. University of Westminster, London.

Rong, Huazhen, Guan, Yixing, Li, Jun, Li, Ziyi, Ma, Dan, Zhang, Jingjing, Liu, Xiaoteng and Zou, Xiaoqin (2022) Dual‐templating surface gel into thin SSZ‐13 zeolite membrane for fast selective hydrogen separation. Aggregate, 3 (6). e275. ISSN 2692-4560

Rusli, Helen A. and Aftab, Mersha (2016) Unbroken: Rediscovering long-term value of products through change in perception. In: The International Workshop on Digital Design and Manufacturing Technologies - Embracing Industry 4.0 and Beyond, 12th - 13th April, Newcastle Upon Tyne.

S

Sadia, T., Rahman, Muhammad, Raudhah, A. and Doh, S. I. (2020) The Effectiveness of Palm Oil Fuel Ash Cement Paste to Control Degradation in Ammonium Nitrate Solution. IOP Conference Series: Materials Science and Engineering, 712. 012024. ISSN 1757-899X

Salokhe, Shivam, Rahmati, Mohammad and Masoodi, Ryan (2021) Numerical modelling of the flow in a swelling preform during LCM mould filling. Journal of Reinforced Plastics and Composites, 40 (13-14). pp. 490-504. ISSN 0731-6844

Sarwar, Mohammed and Haider, Julfikar (2008) Development of advanced surface engineering technologies for the benefit of multipoint cutting tools. Advanced Materials Research. pp. 1043-1050. ISSN 1022-6680

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2005) Wear and failure modes in the bandsawing operation when cutting ball-bearing steel. Wear, 259 (7-12). pp. 1144-1150. ISSN 0043-1648

Sarwar, Mohammed, Leung, Pak Sing, Perera, Noel and Armitage, A. (2001) CFD modelling and heat transfer in a NNPB process. International Ceramics Journal, 21. pp. 33-38. ISSN 1123-8216

Sarwar, Mohammed, Zhang, X.-Y. and Gillibrand, D. (1997) Performance of titanium nitride-coated carbide-tipped circular saws when cutting stainless steel and mild steel. Surface and Coatings Technology, 94-95. pp. 617-621. ISSN 0257-8972

Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, Esther, Sanjay, R. M., Siengchin, S. and Srisuk, R. (2023) The Water Absorption and Thermal Properties of Green Pterocarpus Angolensis (Mukwa)-Polylactide Composites. Journal of Natural Fibers, 20 (1). pp. 12-29. ISSN 1544-0478

Shahkamrani, Arian, Askarian-Abyaneh, Hossein, Nafisi, Hamed and Marzband, Mousa (2021) A framework for day-ahead optimal charging scheduling of electric vehicles providing route mapping: Kowloon case study. Journal of Cleaner Production, 307. p. 127297. ISSN 0959-6526

Shahzad, Muhammad Wakil, Burhan, Muhammad, Ybyraiymkul, Doskhan and Ng, Kim (2019) Desalination Processes’ Efficiency and Future Roadmap. Entropy, 21 (1). p. 84. ISSN 1099-4300

Shakoori, Niusha, Fu, Guoyu, Le, Bao, Khaliq, Jibran, Jiang, Long, Huo, Dehong and Shyha, Islam (2021) An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites. International Journal of Advanced Manufacturing Technology, 113 (7). pp. 2003-2015. ISSN 0268-3768

Shen, Anqi, Turner, Sue and Antonopoulos, Georgios (2022) Driven to Death: A Chinese case study on the counterfeiting of automotive components. Asian Journal of Criminology, 17 (3). pp. 311-329. ISSN 1871-0131

Shokri, Alireza and Libenthal, Artem (2014) Investigating the readiness of people in manufacturing SMEs to embark on LSS projects. In: 5th International Conference on Lean Six Sigma, 30 June 2014, Edinburgh - Scotland.

Shokri, Alireza, Uhl, Christian and Nabhani, Farhad (2017) Purchasing Management: The Optimisation of Product and Process Variance. In: 27th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2017), 27-30 June 2017, Modena.

Shyha, Islam (2004) Burr Formation in Drilling of Miniature Holes in Brass. In: The 8th International Conference on Production Engineering, Design, and Control (PEDAC 2004), 27-29 December 2004, Alexandria, Egypt.

Shyha, Islam (2009) Experimental study of small hole drilling in diverse CFRP laminate configurations. In: The 9th International Conference on Production Engineering, Design and Control (PEDAC 2009), 10-12 February 2009, Alexandria, Egypt.

Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. In: 5th Manufacturing Engineering Society International Conference, 26-28 June 2013, Zaragoza, Spain.

Shyha, Islam (2010) On-going experimental work when twist drilling of CFRP and titanium/CFRP/aluminium stacks used in the aerospace industry. In: CIRP January Meeting 2010 – STC C, 20-22 January 2010, Paris, France.

Shyha, Islam (2009) Small hole drilling of carbon fibre composites using diamond coated drills. In: Efficient & Low Carbon Manufacturing: proceedings of the 26th International Manufacturing Conference (IMC26). Trinity College Dublin, Dublin, Ireland, pp. 87-94. ISBN 978-0956230386

Shyha, Islam, Aspinwall, David, Soo, Sein Leung and Bradley, Sam (2009) Drill geometry and operating effects when cutting small diameter holes in CFRP. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 12-13. ISSN 0890-6955

Shyha, Islam, Gariani, Salah and Bhatti, M. (2015) Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Procedia Engineering, 132. pp. 577-584. ISSN 1877-7058

Shyha, Islam, Kuo, Chun Liang and Soo, Sein Leung (2014) Workpiece surface integrity and productivity when cutting CFRP and GFRP composites using a CO2 laser. International Journal of Mechatronics and Manufacturing Systems, 7 (2/3). pp. 93-107. ISSN 1753-1039

Shyha, Islam and Patrick, Munachi (2014) Machinability analysis when drilling Kovar shape memory alloys. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.

Shyha, Islam and Rudd, Mark (2014) Electro-Discharge Machining of Metal Matrix Composite Materials. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2010) Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. Journal of Materials Processing Technology, 210 (8). pp. 1023-1034. ISSN 0924-0136

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2011) The effect of peel ply layer on hole integrity when drilling carbon fibre-reinforced plastic. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 225 (7). pp. 1217-1223. ISSN 0954-4054

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Dawson, Stuart and Pretorius, Cornelius (2010) Drilling of titanium/CFRP/aluminium stacks. Key Engineering Materials, 447 (624). pp. 624-633. ISSN 1013-9826

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Perry, Richard, Harden, Peter and Dawson, Stuart (2011) Hole quality assessment following drilling of metallic-composite stacks. International Journal of Machine Tools and Manufacture, 51 (7-8). pp. 569-578. ISSN 0890-6955

Simons, Philippa and Cheung, Wai Ming (2016) Development of a Quantitative Analysis System for Greener and Economically Sustainable Wind Farms. Journal of Cleaner Production, 133. pp. 886-898. ISSN 0959-6526

Soo, Sein Leung, Shyha, Islam, Barnett, Tom, Aspinwall, David and Sim, Wei-Ming (2012) Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites. CIRP Annals - Manufacturing Technology, 61 (1). pp. 295-298. ISSN 0007-8506

Susilawati, Anita, Tan, John, Bell, David and Sarwar, Mohammed (2015) Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34. pp. 1-11. ISSN 0278 6125

T

Tait, Michael W. and Cheung, Wai Ming (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349

Tan, K., Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659

Taoufik, Anass (2021) Fault Detection and Isolation in Controlled Multi-Robot Systems. Doctoral thesis, Northumbria University.

Teng, Xiangyu, Huo, Dehong, Chen, Wanqung, Wong, Eugene, Zheng, Lu and Shyha, Islam (2018) Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes, 32. pp. 116-126. ISSN 1526-6125

Teng, Xiangyu, Huo, Dehong, Shyha, Islam, Chen, Wanqun and Wong, Eugene (2018) An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2127-2140. ISSN 0268-3768

Thomas, Pete and Wainwright, David (1994) Gaining the benefits of integrated manufacturing technology - just who benefits and how? International Journal of Production Economics, 34 (3). pp. 371-381. ISSN 0925-5273

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Meheron, Selowara Joo (2021) Deterioration of marine concrete exposed to wetting-drying action. Journal of Cleaner Production, 278. p. 123383. ISSN 0959-6526

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowarajoo, Meheron (2021) Prediction model for hardened state properties of silica fume and fly ash based seawater concrete incorporating silicomanganese slag. Journal of Building Engineering, 41. p. 102356. ISSN 2352-7102

Ting, Timothy Zhi Hong, Rahman, Muhammad and Lau, Hieng Ho (2020) Sustainable lightweight self-compacting concrete using oil palm shell and fly ash. Construction and Building Materials, 264. p. 120590. ISSN 0950-0618

Torelli, Giacomo, Gillie, Martin, Mandal, Parthasarathi and Tran, Van-Xuan (2017) A multiaxial load-induced thermal strain constitutive model for concrete. International Journal of Solids and Structures, 108. pp. 115-125. ISSN 0020-7683

U

Underwood, Chris (2000) Robust control of HVAC plant I: Modelling. Building Services Engineering Research and Technology, 21 (1). pp. 53-61. ISSN 0143 6244

Underwood, Chris (2000) Robust control of HVAC plant II: Controller design. Building Services Engineering Research and Technology, 21 (1). pp. 63-71. ISSN 0143 6244

V

Vichare, Parag, Zhang, Xianzhi, Dhokia, Vimal, Cheung, Wai Ming, Xiao, Wenlei and Zheng, Lianyu (2018) Computer Numerical Control Machine Tool Information Reusability within Virtual Machining Systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 593-604. ISSN 0954-4054

Villanueva, Emanuel Martinez, Mamledesai, Harshavardhan, Martinez Rodriguez, Pablo, Poostchi, Peyman and Ahmad, Rafiq (2021) Design and simulation of an automated robotic machining cell for cross-laminated timber panels. Procedia CIRP, 100. pp. 175-180. ISSN 2212-8271

W

Wallace, Kieran and Cheung, Wai Ming (2013) Development of a compact excavator mounted dust suppression system. Journal of Cleaner Production, 54. pp. 344-352. ISSN 0959 6526

Wan, Chaoying, Bao, Xujin, Zhao, Feng, Kandasubramanian, Bala and Duggan, Matt (2008) Morphology and properties of silane-modified montmorillonite clays and clay/PBT composites. Journal of Applied Polymer Science, 110 (1). pp. 550-557. ISSN 0021-8995

Wan, Chaoying and Chen, Biqiong (2011) Poly(ε-caprolactone)/graphene oxide biocomposites: mechanical properties and bioactivity. Biomedical Materials, 6 (5). 055010-055017. ISSN 1748-6041

Wan, Chaoying and Chen, Biqiong (2011) Synthesis and characterization of biomimetic hydroxyapatite/sepiolite nanocomposites. Nanoscale, 3 (2). pp. 693-700. ISSN 2040-3364

Wan, Chaoying, Dong, Wei, Zhang, Yinxi and Zhang, Yong (2007) Intercalation process and rubber–filler interactions of polybutadiene rubber/organoclay nanocomposites. Journal of Applied Polymer Science, 107 (1). pp. 650-657. ISSN 0021-8995

Wan, Chaoying, Frydrych, Martin and Chen, Biqiong (2011) Strong and bioactive gelatin–graphene oxide nanocomposites. Soft Matter, 7 (13). pp. 6159-6166. ISSN 1744-683X

Wan, Chaoying, Li, Ming, Bai, Xin and Zhang, Yong (2009) Synthesis and Characterization of Photoluminescent Eu(III) Coordination Halloysite Nanotube-Based Nanohybrids. The Journal of Physical Chemistry C, 113 (36). pp. 16238-16246. ISSN 1932-7447

Wan, Chaoying, Zhao, Feng, Bao, Xujin, Kandasubramanian, Bala and Duggan, Matt (2009) Effect of POSS on crystalline transitions and physical properties of polyamide 12. Journal of Polymer Science Part B: Polymer Physics, 47 (2). pp. 121-129. ISSN 0887-6266

Wan, Chaoying, Zhao, Feng, Bao, Xujin, Kandasubramanian, Bala and Duggan, Matt (2008) Surface Characteristics of Polyhedral Oligomeric Silsesquioxane Modified Clay and Its Application in Polymerization of Macrocyclic Polyester Oligomers. The Journal of Physical Chemistry B, 112 (38). pp. 11915-11922. ISSN 1520-6106

Wang, Ding (2019) Mechanics study and application of micro-engineered smart surface. Doctoral thesis, Northumbria University.

Wang, Jian, Li, Rong, Ding, Guofu, Qin, Sheng-feng and Cai, Ziyi (2022) Product-service system engineering characteristics design for life cycle cost based on constraint satisfaction problem and Bayesian network. Advanced Engineering Informatics, 52. p. 101573. ISSN 1474-0346

Wang, Jiepeng, Gao, Zhiwei and Fu, Yichuan (2018) Chattering-free discrete-time sliding mode control with event-trigger strategy. In: INDIN 2018 - IEEE 16th International Conference on Industrial Informatics, 18th - 20th July 2018, Porto, Portugal.

Wang, Ruyin, Wan, Chaoying, Wang, Shifeng and Zhang, Yong (2009) Morphology, mechanical properties, and durability of poly(lactic acid) plasticized with Di(isononyl) cyclohexane-1,2-dicarboxylate. Polymer Engineering & Science, 49 (12). pp. 2414-2420. ISSN 0032-3888

Wang, Yu-Lin, Liu, Bin, Pang, Yi-Neng, Liu, Juan, Shi, Jiu-Lin, Wan, Sheng-Peng, He, Xing-Dao, Yuan, Jinhui and Wu, Qiang (2021) Low-cost wearable sensor based on a D-shaped plastic optical fiber for respiration monitoring. IEEE Transactions on Instrumentation and Measurement, 70. p. 4004808. ISSN 0018-9456

Weirs, John and Osborne, Allan (2020) Refocusing sustainability education: using students’ reflections on their carbon footprint to reinforce the importance of considering CO2 production in the construction industry. Frontiers in Built Environment, 6. p. 23. ISSN 2297-3362

Whittingham, Rickard, Duncan, Trevor and Wilson, Colin (2012) Tools for Everyday Life. [Show/Exhibition]

Widdowfield Small, Deighton (2023) Development of innovative cold-formed steel joist and composite floor systems. Doctoral thesis, Northumbria University.

Woods, Thomas (2015) Process mapping in new product development for environmental impact reduction in small and medium manufacturing enterprises. Doctoral thesis, Northumbria University.

Woods, Thomas, Cheung, Wai Ming, Hilton, Kevin and Penlington, Roger (2015) Environmental Impact Reduction for Small and Medium-sized Manufacturing Enterprises in New Product Development. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Wu, Jiaen, Kuruvithadam, Kiran, Schaer, Alessandro, Stoneham, Richard, Chatzipirpiridis, George, Easthope, Chris Awai, Barry, Gill, Martin, James, Pané, Salvador, Nelson, Bradley J., Ergeneman, Olgaç and Torun, Hamdi (2021) An Intelligent In-Shoe System for Gait Monitoring and Analysis with Optimized Sampling and Real-Time Visualization Capabilities. Sensors, 21 (8). p. 2869. ISSN 1424-8220

X

Xing, Y., Qin, Sheng-feng, Wang, Tai Yong, Wang, P. C. and Xing, J. L. (2012) Study on a New Design Algorithm for Smooth Manufacture. Materials Science Forum, 697. pp. 765-768. ISSN 1662-9752

Xing, Zhuo, Yin, Changzhi, Yu, Zezong, Khaliq, Jibran and Li, Chunchun (2020) Synthesis of LiBGeO4 using compositional design and its dielectric behaviors at RF and microwave frequencies. Ceramics International, 46 (14). pp. 22460-22465. ISSN 0272-8842

Xu, Yuchun, Erkoyuncu, John Ahmed, Bankole, Oyetola, Goh, Yee Mey, Cheung, Wai Ming, Baguley, Paul, Wang, Qing, Arundachawat, Panumas, Shehab, Essam, Newnes, Linda and Roy, Rajkumar (2012) Cost engineering for manufacturing: current and future research. International Journal of Computer Integrated Manufacturing, 25 (4/5). pp. 300-314. ISSN 0951-192X

Y

Yang, Baopeng, Liu, Kang, Li, HuangJingWei, Liu, Changxu, Fu, Junwei, Li, Hongmei, Huang, Jianan Erick, Ou, Pengfei, Alkayyali, Tartela, Cai, Chao, Duan, Yuxia, Liu, Hui, An, Pengda, Zhang, Ning, Li, Wenzhang, Qiu, Xiaoqing, Jia, Chuankun, Hu, Junhua, Chai, Liyuan, Lin, Zhang, Gao, Yongli, Miyauchi, Masahiro, Cortés, Emiliano, Maier, Stefan A. and Liu, Min (2022) Accelerating CO2 Electroreduction to Multicarbon Products via Synergistic Electric–Thermal Field on Copper Nanoneedles. Journal of the American Chemical Society, 144 (7). pp. 3039-3049. ISSN 0002-7863

Yang, Longzhi, Li, Jie, Hackney, Philip, Chao, Fei and Flanagan, Mark (2017) Manual Collate and Pack Area Completion Time Estimation for POS and POP Manufacturing Scheduling. In: IEEE CPSCom-2017 - 10th IEEE International Conference on Cyber, Physical and Social Computing, 21st - 23rd June 2017, Bradford, UK.

Young, Robert I., Dorador, Jie, Zhao, Jesus and Cheung, Wai Ming (2001) A Manufacturing Information Infrastructure to Link Team Based Design to Global Manufacture. In: Global Engineering, Manufacturing and Enterprise Networks. Springer, pp. 283-290. ISBN 978-1-4757-1012-0

Yu, Hangzhuo, Jiang, Lei, Wang, Jindong, Qin, Sheng-feng and Ding, Guofu (2020) Prediction of machining accuracy based on geometric error estimation of tool rotation profile in five-axis multi-layer flank milling process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (11). pp. 2160-2177. ISSN 0954-4062

Yu, Jian (2004) Direct torque control of brushless doubly-fed reluctance machines. Doctoral thesis, Northumbria University.

Yu, Xin, Wu, Zijian, Weng, Ling, Jiang, Dawei, Algadi, Hassan, Qin, Zhuofan, Guo, Zhanhu and Xu, Bin (2023) Flexible strain sensor enabled by carbon nanotubes-decorated electrospun TPU membrane for human motion monitoring. Advanced Materials Interfaces, 10 (11). p. 2202292. ISSN 2196-7350

Z

Zhang, Dapeng, Du, Lifeng and Gao, Zhiwei (2021) Real-Time Parameter Identification for Forging Machine Using Reinforcement Learning. Processes, 9 (10). p. 1848. ISSN 2227-9717

Zhang, Haizhu, Qin, Sheng-feng, Li, Rong, Zou, Yisheng and Ding, Guofu (2020) Progressive modelling of feature-centred product family development. International Journal of Production Research, 58 (12). pp. 3701-3723. ISSN 0020-7543

Zhang, Jian, Ding, Guofu, Zhou, Y. S., Jiang, J., Ying, X. and Qin, Sheng-feng (2014) Identification of key design parameters of high-speed train for optimal design. International Journal of Advanced Manufacturing Technology, 73 (1-4). pp. 251-265. ISSN 0268-3768

Zhang, Jian, Ding, Guofu, Zou, Yisheng, Qin, Sheng-feng and Fu, Jianlin (2019) Review of job shop scheduling research and its new perspectives under Industry 4.0. Journal of Intelligent Manufacturing, 30 (4). pp. 1809-1830. ISSN 0956-5515

Zhang, Lingyan, Wan, Chaoying and Zhang, Yong (2009) Investigation on morphology and mechanical properties of polyamide 6/maleated ethylene-propylene-diene rubber/organoclay composites. Polymer Engineering & Science, 49 (2). pp. 209-216. ISSN 0032-3888

Zhang, Lingyan, Wan, Chaoying and Zhang, Yong (2009) Investigation on the multiwalled carbon nanotubes reinforced polyamide 6/polypropylene composites. Polymer Engineering & Science, 49 (10). pp. 1909-1917. ISSN 0032-3888

Zhang, Lingyan, Wan, Chaoying and Zhang, Yong (2009) Morphology and electrical properties of polyamide 6/polypropylene/multi-walled carbon nanotubes composites. Composites Science and Technology, 69 (13). pp. 2212-2217. ISSN 0266-3538

Zhang, Lingyan, Wan, Chaoying and Zhang, Yong (2008) Polyamide 6/maleated ethylene-propylene-diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer. Journal of Applied Polymer Science, 110 (3). pp. 1870-1879. ISSN 0021-8995

Zhang, Long, Bibi, Farzana, Hussain, Imtiyaz, Sultan, Muhammad, Arshad, Adeel, Hasnain, Saqib, Alarifi, Ibrahim M., Alamir, Mohammed A. and Sajjad, Uzair (2022) Evaluating the Stress-Strain Relationship of the Additively Manufactured Lattice Structures. Micromachines, 14 (1). p. 75. ISSN 2072-666X

Zhao, Feng, Bao, Xujin, McLauchlin, Andrew, Gu, Jiajie, Wan, Chaoying and Kandasubramanian, Bala (2010) Effect of POSS on morphology and mechanical properties of polyamide 12/montmorillonite nanocomposites. Applied Clay Science, 47 (3-4). pp. 249-256. ISSN 01691317

Zhao, Feng, Wan, Chaoying, Bao, Xujin and Kandasubramanian, Bala (2009) Modification of montmorillonite with aminopropylisooctyl polyhedral oligomeric silsequioxane. Journal of Colloid and Interface Science, 333 (1). pp. 164-170. ISSN 0021-9797

Zhao, Jie, Cheung, Wai Ming and Young, Robert (1999) A Consistent Manufacturing Data Model to Support Virtual Enterprises. International Journal of Agile Management Systems, 1 (3). pp. 150-158. ISSN 1465-4652

Zhao, Jie, Cheung, Wai Ming and Young, Robert (2000) The Influence of Manufacturing Information Models on Product Development Systems. In: Engineering Design Conference 2000, 27th - 29th June 2000, London, UK.

Zhao, Jie-Yu, Hu, Bing, Dolfing, Jan, Li, Yan, Tang, Yue-Qin, Jiang, Yiming, Chi, Chang-Qiao, Xing, Jianmin, Nie, Yong and Wu, Xiao-Lei (2021) Thermodynamically favorable reactions shape the archaeal community affecting bacterial community assembly in oil reservoirs. Science of the Total Environment, 781. p. 146506. ISSN 0048-9697

Zhu, Haimin, Chen, Weifang, Li, Miaomiao, Zhu, Rupeng, Zhang, Li, Fu, Bibo, Wang, Shuai and Lu, Xiong (2021) Experimental and numerical investigation of rubber damping ring and its application in multi-span shafting. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (1). p. 43. ISSN 1678-5878

This list was generated on Wed Oct 9 18:21:53 2024 UTC.