 | Up a level |
Abd El Aziz, Ahmad, Ng, Wai Pang, Ghassemlooy, Zabih, Aly, M. H. and Ngah, Razali (2010) Employing wavelength diversity to improve SOA gain uniformity. In: The 15th European conference on Networks and Optical Communications, 8-10 June 2010, Faro, Algarve, Portugal .
Aggoune, Woihida and Busawon, Krishna (2010) A Remark on Stabilization of Nonlinear Systems with Discrete and Distributed Delays. In: 8th IFAC Symposium on Nonlinear Control Systems, 1-3 September 2010, University of Bologna, Italy .
Ahmad, Haifa G. (2010) Studies and modelling of high temperature diffusion processes in selected high performance structural coating systems. Doctoral thesis, Northumbria University.
Ahmed, Rihan, Gu, Da-Wei and Postlethwaite, Ian (2011) System structure configuration and actuator degradation. In: Proceedings of the 2011 Chinese Control and Decision Conference (CCDC). IEEE, Piscataway, pp. 2647-2652. ISBN 9781424487370
Ameli, Masoud, Agnew, Brian, Ng, Bobo, McGlen, R. J., Sutcliffe, C. J. and Singh, J. (2012) Sintered aluminium heat pipe (SAHP). In: 16th International Heat Pipe Conference (16th IHPC), 20-24 May 2012, Lyon, France.
Bandyopadhyay, Bijnan, Deepak, Fulwani, Postlethwaite, Ian and Turner, Matthew (2010) A nonlinear sliding surface to improve performance of a discrete-time input-delay system. International Journal of Control, 83 (9). pp. 1895-1906. ISSN 0020-7179
Bauer, Thomas (2006) Thermophotovoltaic applications in the UK : critical aspects of system design. Doctoral thesis, Northumbria University.
Beattie, Neil, Moir, Robert, Chacko, Charlslee, Buffoni, Giorgio, Roberts, Simon and Pearsall, Nicola (2012) Understanding the effects of sand and dust accumulation on photovoltaic modules. Renewable Energy, 48. pp. 448-452. ISSN 0960-1481
Beattie, Neil, Moir, Robert, Roberts, Simon, Buffoni, Giorgio, Graham, Paul and Pearsall, Nicola (2011) Sand and dust accumulation on photovoltaic modules in dry regions. In: 7th Photovoltaic Science Applications and Technology (PVSAT-7), 6 -8 April 2011, Herriot Watt University, Edinburgh, UK.
Boutat, Driss and Busawon, Krishna (2011) On the transformation of nonlinear dynamical systems into the extended nonlinear observable canonical form. International Journal of Control, 84 (1). pp. 94-106. ISSN 0020-7179
Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Assessment of professional competencies and mobility of engineers in Europe. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 9781907632167
Chaal, Hamza and Jovanovic, Milutin (2010) Direct power control of brushless doubly-fed reluctance machines. In: 5th IET International COnference on Power Electronics, Machines and Drives (PEMD), 19-21 April 2010, Brighton, UK.
Chaal, Hamza and Jovanovic, Milutin (2011) Practical Implementation of Sensorless Torque and Reactive Power Control of Doubly-Fed Machines. IEEE Transactions on Industrial Electronics, 59 (6). pp. 2645-2563. ISSN 0278-0046
Chaal, Hamza and Jovanovic, Milutin (2010) Second order sliding mode control of a DC drive with uncertain parameters and load conditions. In: Proceedings of the 2010 Chinese Control and Decision Conference. IEEE, Singapore, pp. 3204-3208. ISBN 9781424451814
Chandra, Bharani, Srikanthan, Hemnath, Gu, Da-Wei, Bandyopadhyay, Bijnan and Postlethwaite, Ian (2012) Discrete-time sliding mode control using an H∞ filter for a quadruple tank system. In: Proceedings of the 2012 12th International Workshop on Variable Structure Systems. IEEE, Piscataway, pp. 349-354. ISBN 9781457720659
Cheung, Wai Ming, Mileham, A. R., Newnes, L. B., Marsh, R. and Lanham, J. D. (2011) Data-driven through-life costing to support product lifecycle management solutions in innovative product development. International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 122-142. ISSN 1743-5110
Cheung, Wai Ming, Newnes, L. B., Mileham, A. R. and Goh, Mey Y. (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer , New York, pp. 135-151. ISBN 9781441983213
Cheung, Wai Ming, Woods, Thomas, Penlington, Roger and Hilton, Kevin (2011) Long term sustainable product development at the packaging sector. In: 9th International Conference on Manufacturing Research, 6 - 8 September 2011, Glasgow Caledonian University.
Cheung, Wai Ming and Xu, Y. (2012) Cost engineering for manufacturing: current and future research. International Journal of Computer Integrated Manufacturing, 25 (4/5). pp. 300-314. ISSN 0951-192X
Daadbin, Ali and Rosinski, Jarek (2010) Development, testing and implementation of the pantograph damage assessment system (PANDAS). In: Computers in Railways XII : Computer System Design and Operation in the Railway and Other Transit Systems. WIT Press, Southampton, pp. 573-580. ISBN 9781845644680
Doraisingam, Anand Raj (2003) Simulation of the intermittent cutting action of a bandsaw blade. Doctoral thesis, Northumbria University.
Dudziak, Tomasz (2010) High temperature corrosion studies and interdiffusion modelling in TiAl based alloys coated with high performance surface layers. Doctoral thesis, Northumbria University.
Ellwein, C. (2002) Vibration based fault detection for Solenoid valves. Doctoral thesis, Northumbria University.
Fekri, Sajjad, Gu, Da-Wei, Khan, Nishat and Postlethwaite, Ian (2010) Fault detection, isolation, and accommodation in a UAV longitudinal control system. In: 2010 Conference on Control and Fault-Tolerant Systems (SysTol), 6-10 October 2010, Nice, France .
Gao, Zhiwei (2005) PD observer parametrization design for descriptor systems. Journal of the Franklin Institute, 342 (5). pp. 551-564. ISSN 0016-0032
Gao, Zhiwei (2002) The class of all reduced-order state observers. Systems Analysis Modelling Simulation, 42 (9). pp. 1309-1317. ISSN 0232-9298
Gao, Zhiwei, Breikin, Tim and Wang, Hong (2007) High-gain estimator and fault-tolerant design with application to a gas turbine dynamic system. IEEE Transactions on Control Systems Technology, 15 (4). pp. 740-753. ISSN 1063-6536
Gao, Zhiwei and Ding, Steven X. (2007) Actuator fault robust estimation and fault-tolerant control for a class of nonlinear descriptor systems. Automatica, 43 (5). pp. 912-920. ISSN 0005-1098
Gao, Zhiwei and Ding, Steven X. (2007) Fault estimation and fault-tolerant control for descriptor systems via proportional, multiple-integral and derivative observer design. IET Control Theory & Applications, 1 (5). pp. 1208-1218. ISSN 1751-8644
Gao, Zhiwei and Ding, Steven X. (2007) Sensor fault reconstruction and sensor compensation for a class of nonlinear state-space systems via a descriptor system approach. IET Control Theory & Applications, 1 (3). pp. 578-585. ISSN 1751-8644
Gao, Zhiwei, Ding, Steven X. and Ma, Y. (2007) Robust fault estimation approach and its application in vehicle lateral dynamic systems. Optimal Control Applications and Methods, 28 (3). pp. 143-156. ISSN 0143-2087
Gao, Zhiwei and Ho, D. W. C. (2001) Comments on "Parameterization of stabilizing compensators by using reduced-order observers". IEEE Transactions on Automatic Control, 46 (11). pp. 1840-1842. ISSN 0018-9286
Gao, Zhiwei and Ho, D. W. C. (2006) On state-space realization of Bezout factorizations in singular systems. Dynamics of continuous discrete and compulsive systems series A , 13 (3/4). p. 387. ISSN 2151-0032
Gao, Zhiwei and Ho, D. W. C. (2004) Proportional multiple-integral observer design for descriptor systems with measurement output disturbances. IEE Proceedings - Control Theory and Applications, 151 (3). p. 279. ISSN 1350-2379
Gao, Zhiwei, Kong, Dexing and Gao, Chuanhou (2012) Modeling and control of complex dynamic systems: Applied mathematical aspects. Journal of Applied Mathematics, 2012. pp. 1-5. ISSN 1110-757X
Gao, Zhiwei, Liu, Wanquan and So, Albert T. P. (2004) Decentralized control of generalized systems via a frequency domain approach. Asian Journal of Control, 6 (1). pp. 46-58. ISSN 1561-8625
Gao, Zhiwei and So, Albert T. P. (2003) On parameterization design for linear observers. Journal of the Franklin Institute, 340 (2). pp. 87-102. ISSN 0016-0032
Gao, Zhiwei and So, Albert T. P. (2003) A general doubly coprime factorization for descriptor systems. Systems & Control Letters, 49 (3). pp. 213-224. ISSN 0167-6911
Gao, Zhiwei and Wang, Fei-Yue (2003) New results on doubly coprime fractional representations of generalized dynamical systems. IEEE Transactions on Automatic Control, 48 (2). pp. 299-303. ISSN 0018-9286
Gao, Zhiwei, Wang, Hong and Chai, T. (2007) A robust fault detection filtering for stochastic distribution systems via descriptor estimator and parametric gain design. IET Control Theory & Applications, 1 (5). pp. 1286-1293. ISSN 1751-8644
Gao, Zhiwei and Wang, Xian-Lai (2002) Performance sensitivity analysis for linear systems with five types of structural uncertainty. Systems Analysis Modelling Simulation, 42 (10). pp. 1537-1547. ISSN 0232-9298
Gao, Zhiwei and Ding, Steven X. (2007) State and disturbance estimator for time-delay systems with application to fault estimation and signal compensation. IEEE Transactions on Signal Processing, 55 (12). pp. 5541-5551. ISSN 1053-587X
Gao, Zhiwei and Ho, D. W. C. (2006) State/noise estimator for descriptor systems with application to sensor fault diagnosis. IEEE Transactions on Signal Processing, 54 (4). pp. 1316-1326. ISSN 1053-587X
Gheblawi, Ezzeddin (2006) An investigation of the heat transfer by conduction and radiation between hot glass and tool moulding. Doctoral thesis, Northumbria University.
Gibson, Helen and Faith, Joe (2011) Node-attribute graph layout for small-world networks. In: 15th International Conference on Information Visualisation (IV), 12-15 July 2011, London.
Gruncell, Brian, Sandham, Neil and McHale, Glen (2013) Simulations of laminar flow past a superhydrophobic sphere with drag reduction and separation delay. Physics of Fluids, 25 (4). 043601. ISSN 1070-6631
Hackney, Philip and Ainsley, Christopher (2011) Rapid manufacturing- state of the art, analysis and future perspectives. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011 , 23-24 May 2011, Terrenganu, Malaysia.
Hackney, Philip and Curry, Paul (2011) A case study of the benefits and conflicts of knowledge between industry, academia and government. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011 , 23-24 May 2011, Terrenganu, Malaysia.
Halliday, D. P., Williams, B. L., Durose, K., Mendis, B., Kartopu, G., Irvine, S. J. C., Zoppi, Guillaume and Forbes, Ian (2012) CdTe/CdS core-shell nanowire structures on glass substrates for photovoltaic applications - growh and characterization. In: Proceedings of the 2011 37th IEEE Photovoltaic Specialists Conference (PVSC),. IEEE, Piscataway, pp. 234-238. ISBN 9781424499663
Harrington, Peter and Ng, Wai Pang (2012) Investigation of the speed-up of a dual microcontroller parallel processing system in the execution of a mathematical operation. In: PGNet 2012: The 13th Annual Postgraduate Symposium on The Convergence of Telecommunications, Networking and Broadcasting, 25-26 June 2012, Liverpool, UK.
Ho, D. W. C. and Gao, Zhiwei (2001) Bezout identity related to reduced-order observer-based controllers for singular systems. Automatica, 37 (10). pp. 1655-1662. ISSN 0005-1098
Hu, Jinyu and Gao, Zhiwei (2012) Distinction immune genes of hepatitis-induced heptatocellular carcinoma. Bioinformatics, 28 (24). pp. 3191-3194. ISSN 1367-4803
Hu, Jinyu and Gao, Zhiwei (2012) Modules identification in gene positive networks of hepatocellular carcinoma using pearson agglomerative method and Pearson cohesion coupling modularity. Journal of Applied Mathematics, 2012. ISSN 1110-757X
Iyi, Draco, Hasan, Reaz and Penlington, Roger (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. In: The Asian Symposium of Computational Heat Transfer and Fluid Flow, 22-26 September 2011, Kyoto University, Kyoto, Japan.
Jovanovic, Milutin and Betz, Robert E. (2001) Control strategies for brushless doubly fed reluctance machines. IEEJ Transactions on Industry Application, 121 (2). pp. 272-278. ISSN 0913-6339
Kerr, M. L., Turner, Matthew, Villota, E., Jayasuriya, S. and Postlethwaite, Ian (2011) A robust anti-windup design procedure for SISO systems. International Journal of Control, 84 (2). pp. 351-369. ISSN 0020-7179
Kim, Jongrae, Heslop-Harrison, Pat, Postlethwaite, Ian and Bates, Declan (2010) Structural adaptation and robustness of Dictyostelium ligand-receptor kinetics for low and high ligand concentrations. International Journal of Robust and Nonlinear Control, 20 (9). pp. 1047-1058. ISSN 1049-8923
Leach, Mark, Ramakrishna Reddy, K. T., Reddy, M. V., Tan, J. K., Jang, D. Y. and Miles, Robert (2012) Tin sulphide thin Fflms synthesised using a two step process. Energy Procedia, 15. pp. 371-378. ISSN 1876-6102
Lim, Eng G. (2002) Circular polarised microstrip antenna design using segmental methods. Doctoral thesis, Northumbria University.
Morris, Robert, McHale, Glen, Dias, Tilak and Newton, Michael (2013) Embroidered Coils for Magnetic Resonance Sensors. Electronics, 2 (2). pp. 168-177. ISSN 2079-9292
Nagamani, K., Reddy, M. V., Lingappa, Y., Ramakrishna Reddy , K. T. and Miles, Robert (2012) Physical properties of ZnxCd1-xS nanocrystalline layers synthesized by solution growth method. International Journal of Optoelectronic Engineering, 2 (2). pp. 1-4. ISSN 2167-7301
Nasikkar, Paresh (2009) The development of cuIn1-xALSe2 thin films for use in photovoltaic solar cells. Doctoral thesis, Northumbria University.
Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Determination of wood strength properties through standard test procedures. In: ICMR 2012: 10th International Conference on Manufacturing Research, 11-13 September 2012 , Aston University, Birmingham, UK.
Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Evaluation of handsaw tooth performance through the development of a controlled cutting test rig. In: ICMR 2012: International Conference on Manufacturing Research 2012, 11-13 September 2012, Aston University, Birmingham, UK.
Naylor, Andrew, Hackney, Philip, Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machnining developed using mechanical properties. Bioresources.com, 7 (3). pp. 2883-2894. ISSN 1930-2126
Ng, Chong (2007) Control of active filters to attenuate harmonic resonance in power distribution networks. Doctoral thesis, Northumbria University.
Ng, Wai Pang, Abd El Aziz, Ahmad, Ghassemlooy, Zabih, Aly, M. H. and Ngah, Razali (2012) Optimised non-uniform biasing technique for a high-speed optical router to achieve uniform semiconductor optical amplifier gain. IET Communications, 6 (5). pp. 484-491. ISSN 1751-8628
Ogah, Ogah E., Zoppi, Guillaume, Forbes, Ian and Miles, Robert (2009) Thin films of tin sulphide for use in thin film solar cell devices. Thin Solid Films, 517 (7). pp. 2485-2488. ISSN 0040-6090
Oliver, Raymond and Toomey, Anne (2010) Design Drives: materials innovation. Ingenia, 42. pp. 38-43. ISSN 1472-9768
Penlington, Roger and Steiner, S. J. (2010) An introduction to sustainable development in the Engineering curriculum. Higher Education Academy, York. ISBN 9781904804970
Perera, Noel and Penlington, Roger (2012) Supporting the attainment of professional attributes in a work based learning programme. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 9781907632167
Popoola, Wasiu Oyewole, Ghassemlooy, Zabih, Haas, H., Leitgeb, E. and Ahmadi, Vahid (2012) Error performance of terrestrial free space optical links with subcarrier time diversity. IET Communications, 6 (5). pp. 499-506. ISSN 1751-8628
Ramachandran, Jayaraman (2005) Modelling of grid connected geographically dispersed PV systems for power system studies. Doctoral thesis, Northumbria University.
Ramakrishna Reddy, K. T., Sreedevi, G., Ramya, K. and Miles, Robert (2012) Physical properties of Nano-crystalline SnS2 layers grown by chemical bath deposition. Energy Procedia, 15. pp. 340-346. ISSN 1876-6102
Richardson, Alan (2003) Hydropolis – The New Atlantis? International Civil Engineering Abstract. pp. 1-3. ISSN 0332-4095
Steiner, S. J. and Penlington, Roger (2010) Approaches to the embedding of sustainability into the engineering curriculum - where are we now, and how do our graduates become global engineers? In: Engineering Education 2010, 6-10 July 2010, Aston University, Birmingham.
Tang, Xuan (2012) Polarisation shift keying modulated free-space optical communication systems. Doctoral thesis, Northumbria University.
Underwood, Chris and Giddings, Bob (2009) A research study on Hong Kong's building services engineering profession: a review of the building services engineering profession in the United Kingdom. Project Report. Hong Kong Institution of Engineers.
Wan, Chaoying, Li, Ming, Bai, Xin and Zhang, Yong (2009) Synthesis and Characterization of Photoluminescent Eu(III) Coordination Halloysite Nanotube-Based Nanohybrids. The Journal of Physical Chemistry C, 113 (36). pp. 16238-16246. ISSN 1932-7447
Wan, Chaoying, Zhao, Feng, Bao, Xujin, Kandasubramanian, Bala and Duggan, Matt (2008) Surface Characteristics of Polyhedral Oligomeric Silsesquioxane Modified Clay and Its Application in Polymerization of Macrocyclic Polyester Oligomers. The Journal of Physical Chemistry B, 112 (38). pp. 11915-11922. ISSN 1520-6106
Wiratama, I. Kade (2012) Aerodynamic Design of Wind Turbine Blades Utilising Nonconventional Control Systems. Doctoral thesis, Northumbria University.