Items where Subject is "H100 General Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 485.

Article

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2017) A Mixed Method Approach to Investigate the Lack of Lean Manufacturing Implementation in Libya. International Journal of Technology and Engineering Studies, 3 (3). pp. 111-116. ISSN 2414-0924

Abdulla, Kurdo F., Cunningham, Lee S. and Gillie, Martin (2017) Simulating masonry wall behaviour using a simplified micro-model approach. Engineering Structures, 151. pp. 349-365. ISSN 0141-0296

Abid, Khizar, Gholami, Raoof, Choate, Paul and Nagaratnam, Brabha (2015) A review on cement degradation under CO2-rich environment of sequestration projects. Journal of Natural Gas Science and Engineering, 27 (2). pp. 1149-1157. ISSN 1875-5100

Ademi, Sul and Jovanovic, Milutin (2015) Vector Control Methods for Brushless Doubly Fed Reluctance Machines. IEEE Transactions on Industrial Electronics, 62 (1). pp. 96-104. ISSN 0278-0046

Ahmad Jamil, Muhammad, Goraya, Talha S., Ur Rehman, Asad, Yaqoob, Haseeb, Ikhlaq, Muhammad, Shahzad, Muhammad Wakil and Zubair, Syed M. (2022) A comprehensive design and optimization of an offset strip-fin compact heat exchanger for energy recovery systems. Energy Conversion and Management: X, 14. p. 100191. ISSN 2590-1745

Al-Hamd, Rwayda Kh. S., Gillie, Martin, Mohamad, Safaa Adnan and Cunningham, Lee S. (2020) Influence of loading ratio on flat slab connections at elevated temperature: A numerical study. Frontiers of Structural and Civil Engineering, 14 (3). pp. 664-674. ISSN 2095-2430

Alhiddi, Ahmed, Osborne, Allan and Anyigor, Kelechi (2019) Organizational Culture and Stakeholder Success Criteria in Construction Projects. Periodica Polytechnica Architecture, 50 (2). pp. 148-154. ISSN 1789-3437

Ali, K. H., Crapper, Martin and O'Connor, B. (1997) Fluid mud transport. Proceedings of the Institution of Civil Engineers - Water Maritime and Energy, 124 (1). pp. 64-78. ISSN 1753-7819

Allinson, David, Irvine, Katherine, Edmondson, Jill, Tiwary, Abhishek, Hill, Graeme, Morris, Jonathan, Bell, Margaret, Davies, Zoe, Firth, Steven, Fisher, Jill, Gaston, Kevin, Leake, Jonathan, McHugh, Nicola, Namdeo, Anil, Rylatt, Mark and Lomas, Kevin (2016) Measurement and analysis of household carbon: The case of a UK city. Applied Energy, 164. pp. 871-881. ISSN 0306-2619

Allwood, Julian, Childs, Tom, Clare, Adam, De Silva, Anjali, Dhokia, Vimal, Hutchings, Ian, Leach, Richard, Leal-Ayala, David, Lowth, Stewart, Majewski, Candice, Marzano, Adelaide, Mehnen, Jörn, Nassehi, Aydin, Ozturk, Erdem, Raffles, Mark, Roy, Raj, Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Altaee, Mohammed, Cunningham, Lee S. and Gillie, Martin (2017) Experimental investigation of CFRP-strengthened steel beams with web openings. Journal of Constructional Steel Research, 138. pp. 750-760. ISSN 0143-974X

Ananiadis, Elias, Argyris, Konstantinos T., Matikas, Theodore E., Sfikas, Athanasios and Karantzalis, Alexandros E. (2021) Microstructure and Corrosion Performance of Aluminium Matrix Composites Reinforced with Refractory High-Entropy Alloy Particulates. Applied Sciences, 11 (3). p. 1300. ISSN 2076-3417

Anthony, Catherine and Cheung, Wai Ming (2017) Cost Evaluation in Design for End-of-Life of Automotive Components. Journal of Remanufacturing, 7 (1). pp. 97-111. ISSN 2210-464X

Ashfaq, Saleha, Tang, Yong and Maqbool, Rashid (2023) Insights of energy and its trade networking impacts on sustainable economic development. Energy, 265. p. 126319. ISSN 0360-5442

Atif, Rasheed and Inam, Fawad (2016) Modeling and simulation of graphene based polymer nanocomposites: advances in the last decade. Graphene, 5 (2). pp. 96-142. ISSN 2169-3471

Atif, Rasheed and Inam, Fawad (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein Journal of Nanotechnology, 7. pp. 1174-1196. ISSN 2190-4286

Atif, Rasheed and Inam, Fawad (2016) The dissimilarities between graphene and frame-like structures. Graphene, 5 (2). pp. 55-72. ISSN 2169-3471

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

Aulenta, Federico, Tucci, Matteo, Cruz Viggi, Carolina, Dolfing, Jan, Head, Ian M. and Rotaru, Amelia‐Elena (2021) An underappreciated DIET for anaerobic petroleum hydrocarbon‐degrading microbial communities. Microbial Biotechnology, 14 (1). pp. 2-7. ISSN 1751-7915

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2005) Open Standard, Open Source and Peer to Peer tools and methods for collaborative product development. Computers in Industry, 56. pp. 260-271. ISSN 0166-3615

Balaji, Palani S., Leblouba, Moussa, Rahman, Muhammad and Ho, Lau Hieng (2016) Static lateral stiffness of wire rope isolators. Mechanics Based Design of Structures and Machines, 44 (4). pp. 462-475. ISSN 1539-7734

Bandyopadhyay, Bijnan, Deepak, Fulwani, Postlethwaite, Ian and Turner, Matthew (2010) A nonlinear sliding surface to improve performance of a discrete-time input-delay system. International Journal of Control, 83 (9). pp. 1895-1906. ISSN 0020-7179

Barbot, Jean Pierre, Boutat, Driss and Busawon, Krishna (2015) Utility of high-order sliding mode differentiators for dynamical left inversion problems. IET Control Theory & Applications, 9 (4). pp. 538-544. ISSN 1751-8644

Barry, Andrew, Parlange, J.-Y and Crapper, Martin (1999) Approximations for the Hantush M function. Journal of Hydrology, 221 (1-2). pp. 91-96. ISSN 0022 1694

Barry, Andrew, Parlange, J.-Y. and Crapper, Martin (1999) Comment on “Analytical series expressions for Hantush's M and S functions” by Michael G. Trefry. Water Resources Research, 35 (7). pp. 2279-2280. ISSN 0043-1397

Beattie, Neil, Moir, Robert, Chacko, Charlslee, Buffoni, Giorgio, Roberts, Simon and Pearsall, Nicola (2012) Understanding the effects of sand and dust accumulation on photovoltaic modules. Renewable Energy, 48. pp. 448-452. ISSN 0960-1481

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Behavior of masonry columns repaired using small diameter cords. Key Engineering Materials, 624. pp. 254-265. ISSN 1662-9795

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Strengthening of thin masonry arches. Key Engineering Materials, 624. pp. 51-58. ISSN 1662-9795

Borri, Antonio, Castori, Giulio, Corradi, Marco and Giannantoni, Andrea (2010) Seismic upgrading works carried out with composite materials on historic constructions. Civil-Comp Proceedings: 93. p. 234. ISSN 1759-3433

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2015) Ageing problems of GFRP grids used for masonry reinforcement. Key Engineering Materials, 624. pp. 413-420. ISSN 1662-9795

Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2015) Durability analysis for FRP and SRG composites in civil applications. Key Engineering Materials, 624. pp. 421-428. ISSN 1662-9795

Boutat, Driss and Busawon, Krishna (2011) On the transformation of nonlinear dynamical systems into the extended nonlinear observable canonical form. International Journal of Control, 84 (1). pp. 94-106. ISSN 0020-7179

Bramall, David, McKay, Kevin, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Manufacturability analysis of early product designs. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 501-508. ISSN 0951-192X

Bruno, Agostino Walter, Perlot, Céline, Mendes, Joao and Gallipoli, Domenico (2018) A microstructural insight into the hygro-mechanical behaviour of a stabilised hypercompacted earth. Materials and Structures, 51 (1). p. 32. ISSN 1359-5997

Busse, Angela, Sandham, Neil, McHale, Glen and Newton, Michael (2013) Change in drag, apparent slip and optimum air layer thickness for laminar flow over an idealised superhydrophobic surface. Journal of Fluid Mechanics, 727. pp. 488-508. ISSN 0022-1120

Butt, Talib E., Akram, Hina, Mahammedi, Charfeldine and House, Christopher (2020) Conceptual site model: an intermediary between baseline study and risk assessment. WIT Transactions on Engineering Sciences, 1. pp. 101-108. ISSN 1743-3533

Carrillo-Barragán, Priscilla, Dolfing, Jan, Sallis, Paul and Gray, Neil (2021) The stability of ethanol production from organic waste by a mixed culture depends on inoculum transfer time. Biochemical Engineering Journal, 166. p. 107875. ISSN 1369-703X

Chaal, Hamza and Jovanovic, Milutin (2011) Practical Implementation of Sensorless Torque and Reactive Power Control of Doubly-Fed Machines. IEEE Transactions on Industrial Electronics, 59 (6). pp. 2645-2563. ISSN 0278-0046

Chahrour, Racha, Hafeez, Mian Atif, Ahmad, Ahmad Mohammad, Sulieman, Hashim Ibnauf, Dawood, Huda, Rodriguez-Trejo, Sergio, Kassem, Mohamad, Naji, Khalid Kamal and Dawood, Nashwan (2021) Cost-benefit analysis of BIM-enabled design clash detection and resolution. Construction Management and Economics, 39 (1). pp. 55-72. ISSN 0144-6193

Chan, P. W., Moehler, Robert and Greenwood, David (2008) International Research Roundup: A fresh look at learning. Construction Information Quarterly, 10. pp. 29-30. ISSN 1469-4891

Chandra, Bharani, Gu, Da-Wei and Postlethwaite, Ian (2013) Square root cubature information filter. IEEE Sensors Journal, 13 (2). pp. 750-758. ISSN 1530-437X

Chandra, Bharani, Gu, Da-Wei and Postlethwaite, Ian (2014) A cubature H∞filter and its square-root version. International Journal of Control, 87 (4). pp. 764-776. ISSN 0020-7179

Chen, Qun, Yang, Ruiming, Zhao, Bo, Li, Yan, Wang, Shujuan, Wu, Hongwei, Zhuo, Yuqun and Chen, Changhe (2014) Investigation of Heat of Biomass Pyrolysis and Secondary Reactions by Simultaneous Thermogravimetry and Differential Scanning Calorimetry. Fuel, 134. pp. 467-476. ISSN 0016-2361

Chen, Yan, Feng, Huijuan, Ma, Jiayao, Peng, Rui and You, Zhong (2016) Symmetric waterbomb origami. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2190). p. 20150846. ISSN 1364-5021

Cheung, Wai Ming, Bramall, David, Maropoulos, Paul, Gao, James and Aziz, Hayder (2006) Organisational Knowledge Encapsulation and Re-use in Collaborative Product Development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X

Cheung, Wai Ming, Leong, Jun and Vichare, Parag (2017) Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products. Journal of Cleaner Production, 167. pp. 759-775. ISSN 0959-6526

Cheung, Wai Ming, Marsh, Robert, Newnes, Linda, Mileham, Antony and Lanham, John (2015) Cost Data Modelling and Searching to Support Low Volume, High Complexity, Long Life Defence Systems Development. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (5). pp. 835-846. ISSN 0954-4054

Cheung, Wai Ming, Mileham, Antony, Newnes, Linda, Marsh, Robert and Lanham, John (2011) Data-driven through-life costing to support product lifecycle management solutions in innovative product development. International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 122-142. ISSN 1743-5110

Cheung, Wai Ming and Pachisia, Vedant (2015) Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity. Resources, Conservation and Recycling, 101. pp. 34-41. ISSN 0921-3449

Chowdhury, Gobinda, Koya, Kushwanth and Philipson, Pete (2016) Measuring the impact of research: lessons from the UK’s Research Excellence Framework 2014. PLoS ONE, 11 (6). e0156978. ISSN 1932-6203

Corradi, Marco, Borri, Antonio, Castori, Giulio and Sisti, Romina (2014) Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids. Composites Part B: Engineering, 64. pp. 33-42. ISSN 13598368

Corradi, Marco, Borri, Antonio and Vignoli, Andrea (2002) Strengthening techniques tested on masonry structures struck by the Umbria–Marche earthquake of 1997–1998. Construction and Building Materials, 16 (4). pp. 229-239. ISSN 09500618

Corradi, Marco, Castori, Giulio and Borri, Antonio (2020) Repairing brickwork panels using titanium rods embedded in the mortar joints. Engineering Structures, 221. p. 111099. ISSN 0141-0296

Corradi, Marco, Speranzini, Emanuela, Borri, Antonio and Vignoli, Andrea (2006) In-plane shear reinforcement of wood beam floors with FRP. Composites Part B: Engineering, 37 (4-5). pp. 310-319. ISSN 13598368

Corradi, Sandro, Isidori, Tatiana, Corradi, Marco, Soleri, Fabio and Olivari, Luca (2009) Composite boat hulls with bamboo natural fibres. International Journal of Materials and Product Technology, 36 (1-4). pp. 73-89. ISSN 0268-1900

Daramola, Alex S., Ahmadi, Seyed Ehsan, Marzband, Mousa and Ikpehai, Augustine (2023) A cost-effective and ecological stochastic optimization for integration of distributed energy resources in energy networks considering vehicle-to-grid and combined heat and power technologies. Journal of Energy Storage, 57. p. 106203. ISSN 2352-152X

Deng, Xu, Mecrow, Barrie, Wu, Haimeng and Martin, Richard (2018) Design and Development of Low Torque Ripple Variable-Speed Drive System With Six-Phase Switched Reluctance Motors. IEEE Transactions on Energy Conversion, 33 (1). pp. 420-429. ISSN 0885-8969

Deshpande, Paresh, Menon, Prathyush, Edwards, Christopher and Postlethwaite, Ian (2012) Sub-optimal distributed control law with H2 performance for identical dynamically coupled linear systems. IET Control Theory & Applications, 6 (16). pp. 2509-2517. ISSN 1751-8644

Dissanayake, Madhushan, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Tsavdaridis, Konstantinos D. and Nagaratnam, Brabha (2019) Finite Element Analyses of Cold‐formed Stainless Steel Beams Subject to Shear. ce/papers, 3 (3-4). pp. 931-936. ISSN 2509-7075

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2014) An accurate method for the PV Model identification based on a genetic algorithm and the interior-point method. Renewable Energy, 72. pp. 212-222. ISSN 0960-1481

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2015) Standalone DC microgrids as complementarity dynamical systems: Modeling and applications. Control Engineering Practice, 35. pp. 102-112. ISSN 0967-0661

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) Modelling and simulation of standalone solar power systems. International Journal of Computational Methods and Experimental Measurements, 2 (1). pp. 107-125. ISSN 2046-0554

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) A multivariable optimal energy management strategy for standalone DC microgrids. IEEE Transactions on Power Systems, 30 (5). pp. 2278-2287. ISSN 0885-8950

Doukari, Omar, Seck, Boubacar and Greenwood, David (2022) The efficient generation of 4D BIM construction schedules: A case study of the Nanterre 2 CESI project in France. Frontiers in Built Environment, 8. p. 998309. ISSN 2297-3362

Edmondson, Vikki and Sheratt, Fred (2022) Engineering judgement in undergraduate structural design education: Enhancing learning with failure case studies. European Journal of Engineering Education, 47 (4). pp. 577-590. ISSN 0304-3797

Ekambaram, Karthikeyan, Frampton, Richard and Bartlett, Lisa (2015) Improving the Chest Protection of Elderly Occupants in Frontal Crashes Using SMART Load Limiters. Traffic Injury Prevention, 16 (sup2). S77-S86. ISSN 1538-9588

Elkady, Mostafa, Elmarakbi, Ahmed and MacIntyre, John (2015) Integration of vehicle dynamics control systems with an extendable bumper for collision mitigation. International Journal of Automotive and Mechanical Engineering, 12. pp. 2893-2913. ISSN 2229-8649

Elmadih, W., Chronopoulos, D., Syam, W. P., Maskery, I., Meng, Han and Leach, R. K. (2019) Three-dimensional resonating metamaterials for low-frequency vibration attenuation. Scientific Reports, 9 (1). ISSN 2045-2322

Elmarakbi, Ahmed and Zu, Jean (2003) Numerical Analysis and Optimization of Vehicle Compatibility Using a Smart Vehicle Structure. SAE Technical Papers. pp. 2003-01. ISSN 0148-7191

Elmarakbi, Ahmed and Zu, Jean (2004) Vehicle to vehicle compatibility: Theoretical formulation, numerical analysis, and optimization. Transactions of the Canadian Society for Mechanical Engineering, 28 (2B). pp. 355-374. ISSN 0315-8977

Fabro, Adriano T., Meng, Han and Chronopoulos, Dimitrios (2020) Uncertainties in the attenuation performance of a multi-frequency metastructure from additive manufacturing. Mechanical Systems and Signal Processing, 138. p. 106557. ISSN 0888-3270

Faheem, Malik (2017) Autonomous vehicles: Safety, sustainability, and fuel efficiency. i-manager’s Journal on Future Engineering and Technology, 12 (4). pp. 1-7. ISSN 0973-2632

Fang, Qisheng, Sun, Mengxuan, Ren, Xiaohe, Sun, Yongxiu, Yan, Yijun, Gan, Ziwei, Huang, Jianan, Cao, Baobao, Shen, Wenzhong, Li, Zhijie and Fu, Yong Qing (2022) MnCo2O4/Ni3S4 nanocomposite for hybrid supercapacitor with superior energy density and long-term cycling stability. Journal of Colloid and Interface Science, 611. pp. 503-512. ISSN 0021-9797

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2016) An Empirical Analysis of the Factors That Support the Drivers of Sustainable Manufacturing. Procedia CIRP, 56. pp. 491-495. ISSN 2212-8271

Faridpak, Behdad, Farrokhifar, Meisam, Alahyari, Arman and Marzband, Mousa (2021) A Mixed Epistemic-Aleatory Stochastic Framework for the Optimal Operation of Hybrid Fuel Stations. IEEE Transactions on Vehicular Technology, 70 (10). pp. 9764-9774. ISSN 0018-9545

Farza, Mondher, M'Saad, Mohammed, Fall, Mamadou Lamine, Pigeon, Eric, Gehan, Olivier and Busawon, Krishna (2014) Continuous-Discrete Time Observers for a Class of MIMO Nonlinear Systems. IEEE Transactions on Automatic Control, 59 (4). pp. 1060-1065. ISSN 0018-9286

Feng, Huijuan, Ma, Jiayao, Chen, Yan and You, Zhong (2018) Twist of Tubular Mechanical Metamaterials Based on Waterbomb Origami. Scientific Reports, 8 (1). ISSN 2045-2322

Feng, Huijuan, Peng, Rui, Zang, Shixi, Ma, Jiayao and Chen, Yan (2020) Rigid foldability and mountain-valley crease assignments of square-twist origami pattern. Mechanism and Machine Theory, 152. p. 103947. ISSN 0094-114X

Fong, Joshua, Edge, Jerry, Underwood, Chris, Tindale, Andy and Potter, Steve (2015) Performance of a dynamic distributed element heat emitter model embedded into a third order lumped parameter building model. Applied Thermal Engineering, 80. pp. 279-287. ISSN 1359-4311

Fong, Joshua, Edge, Jerry, Underwood, Chris, Tindale, Andy, Potter, Steve and Du, Hu (2016) Application of a new dynamic heating system model using a range of common control strategies. Buildings, 6 (2). p. 23. ISSN 2075-5309

Foster, William, Azimov, Ulugbek, Gauthier-Maradei, Paola, Molano, Liliana Castro, Combrinck, Madeleine, Munoz, Jose, Esteves, Jaime Jaimes and Patino, Luis (2021) Waste-to-energy conversion technologies in the UK: Processes and barriers – A review. Renewable and Sustainable Energy Reviews, 135. p. 110226. ISSN 1364-0321

Fryer, L. J., Fear, R. C., Coxon, John and Gingell, I. L. (2021) Observations of Closed Magnetic Flux Embedded in the Lobes During Periods of Northward IMF. Journal of Geophysical Research: Space Physics, 126 (6). e2021JA029281. ISSN 2169-9380

Gallimore, Alexandra and Cheung, Wai Ming (2016) Effects of Environmental Impact Based on Alternative Materials and Process Selection in Automotive Components Design. Journal of Industrial and Production Engineering, 33 (5). pp. 321-338. ISSN 2168-1015

Gao, James, Aziz, Hayder, Maropoulos, Paul and Cheung, Wai Ming (2003) Application of Product Data Management Technologies for Enterprise Integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X

Gao, Zhiwei (2005) PD observer parametrization design for descriptor systems. Journal of the Franklin Institute, 342 (5). pp. 551-564. ISSN 0016-0032

Gao, Zhiwei (2002) The class of all reduced-order state observers. Systems Analysis Modelling Simulation, 42 (9). pp. 1309-1317. ISSN 0232-9298

Gao, Zhiwei, Breikin, Tim and Wang, Hong (2007) High-gain estimator and fault-tolerant design with application to a gas turbine dynamic system. IEEE Transactions on Control Systems Technology, 15 (4). pp. 740-753. ISSN 1063-6536

Gao, Zhiwei and Ding, Steven X. (2007) Actuator fault robust estimation and fault-tolerant control for a class of nonlinear descriptor systems. Automatica, 43 (5). pp. 912-920. ISSN 0005-1098

Gao, Zhiwei and Ding, Steven X. (2007) Fault estimation and fault-tolerant control for descriptor systems via proportional, multiple-integral and derivative observer design. IET Control Theory & Applications, 1 (5). pp. 1208-1218. ISSN 1751-8644

Gao, Zhiwei and Ding, Steven X. (2007) Sensor fault reconstruction and sensor compensation for a class of nonlinear state-space systems via a descriptor system approach. IET Control Theory & Applications, 1 (3). pp. 578-585. ISSN 1751-8644

Gao, Zhiwei and Ding, Steven X. (2007) State and disturbance estimator for time-delay systems with application to fault estimation and signal compensation. IEEE Transactions on Signal Processing, 55 (12). pp. 5541-5551. ISSN 1053-587X

Gao, Zhiwei, Ding, Steven X. and Ma, Y. (2007) Robust fault estimation approach and its application in vehicle lateral dynamic systems. Optimal Control Applications and Methods, 28 (3). pp. 143-156. ISSN 0143-2087

Gao, Zhiwei, Gao, Zhiwei and Ho, Daniel W. C. (2006) State/noise estimator for descriptor systems with application to sensor fault diagnosis. IEEE Transactions on Signal Processing, 54 (4). pp. 1316-1326. ISSN 1053-587X

Gao, Zhiwei and Ho, Daniel W. C. (2001) Comments on "Parameterization of stabilizing compensators by using reduced-order observers". IEEE Transactions on Automatic Control, 46 (11). pp. 1840-1842. ISSN 0018-9286

Gao, Zhiwei and Ho, Daniel W. C. (2006) On state-space realization of Bezout factorizations in singular systems. Dynamics of continuous discrete and compulsive systems series A, 13 (3/4). p. 387. ISSN 2151-0032

Gao, Zhiwei and Ho, Daniel W. C. (2004) Proportional multiple-integral observer design for descriptor systems with measurement output disturbances. IEE Proceedings - Control Theory and Applications, 151 (3). p. 279. ISSN 1350-2379

Gao, Zhiwei, Kong, Dexing and Gao, Chuanhou (2012) Modeling and control of complex dynamic systems: Applied mathematical aspects. Journal of Applied Mathematics, 2012. pp. 1-5. ISSN 1110-757X

Gao, Zhiwei, Liu, Wanquan and So, Albert T. P. (2004) Decentralized control of generalized systems via a frequency domain approach. Asian Journal of Control, 6 (1). pp. 46-58. ISSN 1561-8625

Gao, Zhiwei and So, Albert T. P. (2003) On parameterization design for linear observers. Journal of the Franklin Institute, 340 (2). pp. 87-102. ISSN 0016-0032

Gao, Zhiwei and So, Albert T. P. (2003) A general doubly coprime factorization for descriptor systems. Systems & Control Letters, 49 (3). pp. 213-224. ISSN 0167-6911

Gao, Zhiwei and Wang, Fei-Yue (2003) New results on doubly coprime fractional representations of generalized dynamical systems. IEEE Transactions on Automatic Control, 48 (2). pp. 299-303. ISSN 0018-9286

Gao, Zhiwei, Wang, Hong and Chai, T. (2007) A robust fault detection filtering for stochastic distribution systems via descriptor estimator and parametric gain design. IET Control Theory & Applications, 1 (5). pp. 1286-1293. ISSN 1751-8644

Gao, Zhiwei and Wang, Xian-Lai (2002) Performance sensitivity analysis for linear systems with five types of structural uncertainty. Systems Analysis Modelling Simulation, 42 (10). pp. 1537-1547. ISSN 0232-9298

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2019) A Machine Learning-Based Fast-Forward Solver for Ground Penetrating Radar With Application to Full-Waveform Inversion. IEEE Transactions on Geoscience and Remote Sensing, 57 (7). pp. 4417-4426. ISSN 0196-2892

Gillie, Martin, Dahli, Ranim, Saunders, Fiona C and Gibson, Andrew (2017) Use of rich-media resources by engineering undergraduates. European Journal of Engineering Education, 42 (6). pp. 1496-1511. ISSN 0304-3797

Gledson, Barry and Greenwood, David (2016) Surveying the extent and use of 4D BIM in the UK. Journal of Information Technology in Construction (ITcon), 21. pp. 57-71. ISSN 1874-4753

Gomaa, A., Underwood, Chris, Bond, T. J. and Penlington, Roger (2002) Experimental investigation of sensible heat transfer in fin-and-tube cooling coils. Building Services Engineering Research and Technology, 23 (3). pp. 197-204. ISSN 0143 6244

Goulding, Jack, Ezcan, Volkan and Sutrisna, Monty (2018) Securing the embeddedness of psychosocial diffusion indicators into the Turkish construction industry: silence is no longer golden. Journal of Financial Management of Property and Construction, 23 (1). pp. 90-111. ISSN 1366-4387

Griffin, D., Daadbin, Ali, Datta, Psantu and Burnell-Gray, J. (1995) Modelling of crack propagation through the interfacial region of a SiC/titanium metal matrix composite. Mechanical and corrosion properties. Series A, Key engineering materials, 99-100. pp. 341-346. ISSN 0252 1059

Grote, Rüdiger, Samson, Roeland, Alonso, Rocío, Amorim, Jorge Humberto, Cariñanos, Paloma, Churkina, Galina, Fares, Silvano, Thiec, Didier Le, Niinemets, Ülo, Mikkelsen, Teis Norgaard, Paoletti, Elena, Tiwary, Abhishek and Calfapietra, Carlo (2016) Functional traits of urban trees: air pollution mitigation potential. Frontiers in Ecology and the Environment, 14 (10). pp. 543-550. ISSN 1540-9295

Gruncell, Brian, Sandham, Neil and McHale, Glen (2013) Simulations of laminar flow past a superhydrophobic sphere with drag reduction and separation delay. Physics of Fluids, 25 (4). 043601. ISSN 1070-6631

Guan, Jian, Wells, Gary, Xu, Ben, McHale, Glen, Wood, David, Martin, James and Stuart-Cole, Simone (2015) Evaporation of Sessile Droplets on Slippery Liquid-Infused Porous Surfaces (SLIPS). Langmuir, 31 (43). pp. 11781-11789. ISSN 0743-7463

Guo, Yuanjun, Zhao, Chao, Zhou, X. S., Li, Yifan, Zu, Xiao-Tao, Gibson, Desmond and Fu, Yong Qing (2015) Ultraviolet sensing based on nanostructured ZnO/Si surface acoustic wave devices. Smart Materials and Structures, 24 (12). p. 125015. ISSN 0964-1726

Hadavinia, Homayoun, Dogan, F., Elmarakbi, Ahmed and Khalili, S. M. R. (2011) Modelling of Low Velocity Impact of Laminated Composite Substructures. International Journal of Vehicle Structures and Systems, 3 (2). pp. 96-106. ISSN 0975-3060

Hanifi, Shahram, Liu, Xiaolei, Lin, Zi and Lotfian, Saeid (2020) A Critical Review of Wind Power Forecasting Methods—Past, Present and Future. Energies, 13 (15). p. 3764. ISSN 1996-1073

Haworth, Luke, Yang, Deyu, Agrawal, Prashant, Torun, Hamdi, Hou, Xianghui, McHale, Glen and Fu, Yong Qing (2023) Reduction of Ice Adhesion on Nanostructured and Nanoscale Slippery Surfaces. Nanotechnology and Precision Engineering, 6 (1). 013007. ISSN 2589-5540

Ho, Daniel W. C. and Gao, Zhiwei (2001) Bezout identity related to reduced-order observer-based controllers for singular systems. Automatica, 37 (10). pp. 1655-1662. ISSN 0005-1098

Hopkinson, James, Perera, Noel and Kiazim, Evran (2016) Investigating reliability centered maintenance (RCM) for public road mass transportation vehicles. MATEC Web of Conferences, 81. 08006. ISSN 2261-236X

Hu, Chuan, Gao, Hongbo, Guo, Jinghua, Taghavifar, Hamid, Qin, Yechen, Na, Jing and Wei, Chongfeng (2021) RISE-Based Integrated Motion Control of Autonomous Ground Vehicles With Asymptotic Prescribed Performance. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 51 (9). pp. 5336-5348. ISSN 2168-2216

Hu, Chuan, Wang, Zhenfeng, Taghavifar, Hamid, Na, Jing, Qin, Yechen, Guo, Jinghua and Wei, Chongfeng (2019) MME-EKF-Based Path-Tracking Control of Autonomous Vehicles Considering Input Saturation. IEEE Transactions on Vehicular Technology, 68 (6). pp. 5246-5259. ISSN 0018-9545

Hu, Jinyu and Gao, Zhiwei (2012) Distinction immune genes of hepatitis-induced heptatocellular carcinoma. Bioinformatics, 28 (24). pp. 3191-3194. ISSN 1367-4803

Hu, Jinyu and Gao, Zhiwei (2012) Modules identification in gene positive networks of hepatocellular carcinoma using pearson agglomerative method and Pearson cohesion coupling modularity. Journal of Applied Mathematics, 2012. ISSN 1110-757X

Hua, Weiqi, Jiang, Jing, Sun, Hongjian and Wu, Jianzhong (2020) A blockchain based peer-to-peer trading framework integrating energy and carbon markets. Applied Energy, 279. p. 115539. ISSN 0306-2619

Huang, Yiwen, Li, Taihua, Dai, Xuewu, Wang, Haowen and Yang, Yang (2015) TS2: a realistic IEEE1588 time-synchronization simulator for mobile wireless sensor networks. SIMULATION, 91 (2). pp. 164-180. ISSN 0037-5497

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2015) Effect of Emissivity on the Heat and Mass Transfer of Humid Air in a Cavity Filled with Solid Obstacles. Numerical Heat Transfer, Part A: Applications, 67 (5). pp. 531-546. ISSN 1040-7782

Jangi, Mehdi, Solsjo, Rickard, Johansson, Bengt and Bai, Xue-Song (2015) On large eddy simulation of diesel spray for internal combustion engines. International Journal of Heat and Fluid Flow, 53. pp. 68-80. ISSN 0142-727X

Jiang, Huan, Ziegler, Hannah, Zhang, Zhennan, Meng, Han, Chronopoulos, Dimitrios and Chen, Yanyu (2020) Mechanical properties of 3D printed architected polymer foams under large deformation. Materials & Design, 194. p. 108946. ISSN 0264-1275

Jiang, Tianxiang, Putrus, Ghanim, Gao, Zhiwei, Conti, Matteo, McDonald, Stephen and Lacey, Gillian (2014) Development of a decentralized smart charge controller for electric vehicles. International Journal of Electrical Power & Energy Systems, 61. pp. 355-370. ISSN 0142-0615

Jin, Xianjian, Yan, Zeyuan, Yin, Guodong, Li, Shaohua and Wei, Chongfeng (2021) An Adaptive Motion Planning Technique for On-Road Autonomous Driving. IEEE Access, 9. pp. 2655-2664. ISSN 2169-3536

Jing, Jiabao, Deng, Xiaomei, Maqbool, Rashid, Rashid, Yahya and Ashfaq, Saleha (2020) Default Behaviors of Contractors under Surety Bond in Construction Industry Based on Evolutionary Game Model. Sustainability, 12 (21). p. 9162. ISSN 2071-1050

Jones, A. D. and Underwood, Chris (2003) A method for profiling lighting and small power demands in buildings. Building Services Engineering Research and Technology, 24 (1). pp. 47-53. ISSN 01436 244

Jovanovic, Milutin and Betz, Robert (2001) Control strategies for brushless doubly fed reluctance machines. IEEJ Transactions on Industry Application, 121 (2). pp. 272-278. ISSN 0913-6339

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Procedia Engineering, 132. pp. 569-576. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) Meshfree formulation for modelling of orthogonal cutting of composites. Composite Structures, 166. pp. 193-201. ISSN 0263-8223

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Kamalakis, Thomas, Ghassemlooy, Fary, Zvanovec, Stanislav, Alves, Luis Nero and Khalighi, Mohammad (2022) Optimization and design of a diffuse optical wireless sensor network. Applied Optics, 61 (22). pp. 6599-6608. ISSN 1559-128X

Kamjoo, Azadeh, Maheri, Alireza, Dizqah, Arash and Putrus, Ghanim (2016) Multi-objective design under uncertainties of hybrid renewable energy system using NSGA-II and chance constrained programming. International Journal of Electrical Power & Energy Systems, 74. 187 - 194. ISSN 0142-0615

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2014) Chance constrained programming using non-Gaussian joint distribution function in design of standalone hybrid renewable energy systems. Energy, 66. pp. 677-688. ISSN 0360-5442

Kanthasamy, Elilarasi, Alsanat, Husam, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Corradi, Marco, Thirunavukkarasu, Kajaharan and Dissanayake Mudiyanselage, Madhushan (2022) Web Crippling Behaviour of Cold-Formed High Strength Steel Unlipped Channel Beams. Buildings, 12 (3). p. 291. ISSN 2075-5309

Karamanlı, Armağan and Vo, Thuc (2018) Size dependent bending analysis of two directional functionally graded microbeams via a quasi-3D theory and finite element method. Composites Part B: Engineering, 144. pp. 171-183. ISSN 1359-8368

Karim, Othman, Crapper, Martin and Ali, K. H. (1997) Study of Cohesive Sediment using Ultrasound. Sains Malaysiana, 26 (3&4). pp. 73-79. ISSN 0126-6039

Karmacharya, Samir, Putrus, Ghanim, Underwood, Chris, Mahkamov, Khamid, McDonald, Stephen and Alexakis, Athanasios (2014) Simulation of energy use in buildings with multiple micro generators. Applied Thermal Engineering, 62 (2). pp. 581-592. ISSN 13594311

Kerr, Murray, Turner, Matthew, Villota, Elizabeth, Jayasuriya, Suhada and Postlethwaite, Ian (2011) A robust anti-windup design procedure for SISO systems. International Journal of Control, 84 (2). pp. 351-369. ISSN 0020-7179

Khajenoori, Leila, Wright, Grant and Crapper, Martin (2021) Laboratory Investigation of Geobag Revetment Performance in Rivers. Geosciences, 11 (8). p. 304. ISSN 2076-3263

Khaliq, Jibran, Jiang, Qinghui, Yang, Junyou, Simpson, Kevin, Yan, Haixue and Reece, Michael (2014) Utilizing the phonon glass electron crystal concept to improve the thermoelectric properties of combined Yb-stuffed and Te-substituted CoSb3. Scripta Materialia, 72 (Supple). 63 - 66. ISSN 1359-6462

Khan, Fahad Saleem Ahmed, Mubarak, N. M., Khalid, Mohammad, Khan, Mohammad Mansoob, Tan, Yie Hua, Walvekar, Rashmi, Abdullah, E. C., Karri, Rama Rao and Rahman, Muhammad (2022) Comprehensive review on carbon nanotubes embedded in different metal and polymer matrix: fabrications and applications. Critical Reviews in Solid State and Materials Sciences, 47 (6). pp. 837-864. ISSN 1040-8436

Kim, Jongrae, Heslop-Harrison, Pat, Postlethwaite, Ian and Bates, Declan (2010) Structural adaptation and robustness of Dictyostelium ligand-receptor kinetics for low and high ligand concentrations. International Journal of Robust and Nonlinear Control, 20 (9). pp. 1047-1058. ISSN 1049-8923

Langueh, Kokou, Datcu, Octaviana, Barbot, Jean Pierre, Zheng, Gang and Busawon, Krishna (2016) Observability singularities and observer design: dual immersion approach. IFAC-PapersOnLine, 49 (18). pp. 511-516. ISSN 2405-8963

Leach, Mark, Ramakrishna Reddy, Kotte, Reddy, Vasudeva Reddy Minnam, Tan, John, Jang, Dongyoung and Miles, Robert (2012) Tin sulphide thin films synthesised using a two step process. Energy Procedia, 15. pp. 371-378. ISSN 1876-6102

Leblouba, Moussa, Balaji, Palani Selvaraj and Rahman, Muhammad (2022) Wire Rope Isolators for the Vibration Protection of Heavy Equipment: Exploratory Research. Buildings, 12 (12). p. 2212. ISSN 2075-5309

Lewis, Frank, Harwood, Laurence, Hudson, Michael, Geist, Andreas, Kozhevnikov, Valery, Distler, Petr and John, Jan (2015) Hydrophilic Sulfonated Bis-1,2,4-Triazine Ligands Are Highly Effective Reagents for Separating Actinides(III) from Lanthanides(III) via Selective Formation of Aqueous Actinide Complexes. Chemical Science, 6 (8). pp. 4812-4821. ISSN 2041-6539

Li, Hou-Chang, Leng, Yuan-Kui, Liao, Yun-Cheng, Liu, Bin, Luo, Wei, Liu, Juan, Shi, Jiu-Lin, Yuan, Jinhui, Xu, Heng-Yi, Xiong, Yong-Hua, He, Xing-Dao and Wu, Qiang (2022) Tapered microfiber MZI Biosensor for highly sensitive detection of Staphylococcus aureus. IEEE Sensors Journal, 22 (6). pp. 5531-5539. ISSN 1530-437X

Lin, Zi and Sayer, Philip (2015) An enhanced stiffness model for elastic lines and its application to the analysis of a moored floating offshore wind turbine. Ocean Engineering, 109. pp. 444-453. ISSN 0029-8018

Ling, Haoshu, Chen, Chao, Qin, Hong, Wei, Shen, Lin, Jie, Li, Na, Zhang, Mingxing, Yu, Nan and Li, Yin (2016) Indicators evaluating thermal inertia performance of envelops with phase change material. Energy and Buildings, 122. pp. 175-184. ISSN 0378-7788

Liu, Xiaoteng, Christensen, Paul, Kelly, Stephen, Rocher, Vincent and Scott, Keith (2013) Al2O3 Disk Supported Si3N4 Hydrogen Purification Membrane for Low Temperature Polymer Electrolyte Membrane Fuel Cells. Membranes, 3 (4). pp. 406-414. ISSN 2077-0375

Liu, Xiaoxu and Gao, Zhiwei (2018) Integrated fault estimation and fault-tolerant control for stochastic systems with Brownian motions. International Journal of Robust and Nonlinear Control, 28 (6). pp. 1915-1941. ISSN 1049-8923

Lu, Haibao, Shi, Xiaojuan, Yu, Kai and Fu, Yong Qing (2019) A Strategy for Modelling Mechanochemically Induced Unzipping and Scission of Chemical Bonds in Double-Network Polymer Composite. Composites Part B: Engineering, 165. pp. 456-466. ISSN 1359-8368

Lu, Haibao, Xing, Ziyu, Chen, Mingji, Yu, Kai and Fu, Yong Qing (2021) Solvent-aided phase separation in hydrogel towards significantly enhanced mechanoresponsive strength. Acta Mechanica Sinica, 37 (5). pp. 757-766. ISSN 0567-7718

Lu, Haibao, Yin, Jinying, Xu, Ben, Gou, Jihua, Hui, David and Fu, Yong Qing (2016) Synergistic effects of carboxylic acid-functionalized carbon nanotube and nafion/silica nanofiber on electrical actuation efficiency of shape memory polymer nanocomposite. Composites Part B: Engineering, 100. pp. 146-151. ISSN 1359-8368

Luo, Xiang, Han, G., Wu, Hongwei, Wang, L. and Xu, Guoqiang (2014) Experimental Investigation of Pressure Loss and Heat Transfer in a Rotor-Stator Cavity with Two Outlets. International Journal of Heat and Mass Transfer, 78. pp. 311-320. ISSN 0017-9310

Luo, Xiang, Liu, Dongdong, Wu, Hongwei and Tao, Zhi (2014) Particle Image Velocimetry Measurement and Computational Fluid Dynamic Simulations of the Unsteady Flow within a Rotating Disk Cavity. Journal of Engineering for Gas Turbines and Power, 136 (11). p. 112601. ISSN 0742-4795

Luo, Xiang, Wang, L., Zhao, X., Xu, Guoqiang and Wu, Hongwei (2014) Experimental Investigation of Heat Transfer in a Rotor-Stator Cavity with Cooling Air Inlet at Low Radius. International Journal of Heat and Mass Transfer, 76. pp. 65-80. ISSN 0017-9310

Luo, Xiang, Zhao, X., Wang, L., Wu, Hongwei and Xu, Guoqiang (2014) Flow Structure and Heat Transfer Characteristics in Rotor-Stator Cavity with Inlet at Low Radius. Applied Thermal Engineering, 70 (1). pp. 291-306. ISSN 1359-4311

Macquart, Terence and Maheri, Alireza (2015) Integrated aeroelastic and control analysis of wind turbine blades equipped with microtabs. Renewable Energy, 75. pp. 102-114. ISSN 0960-1481

Mahammedi, Charf E., Mahdjoubi, Lamine, Booth, Colin A. and Butt, Talib E. (2020) Towards the creation of a decision support system tool for the preliminary risk assessment of brownfield sites. WIT Transactions on Ecology and the Environment, 241. pp. 257-265. ISSN 1743-3541

Maheri, Alireza (2014) Multi-objective design optimisation of standalone hybrid wind-PV-diesel systems under uncertainties. Renewable Energy, 66. pp. 650-661. ISSN 0960-1481

Maheri, Alireza (2014) A critical evaluation of deterministic methods in size optimisation of reliable and cost effective standalone Hybrid renewable energy systems. Reliability Engineering & System Safety, 130. pp. 159-174. ISSN 0951-8320

Mansouri, Seyed Amir, Nematbakhsh, Emad, Ahmarinejad, Amir, Jordehi, Ahmad Rezaee, Javadi, Mohammad Sadegh and Marzband, Mousa (2022) A hierarchical scheduling framework for resilience enhancement of decentralized renewable-based microgrids considering proactive actions and mobile units. Renewable and Sustainable Energy Reviews, 168. p. 112854. ISSN 1364-0321

Martinez Rodriguez, Pablo, Mohsen, Osama, Al-Hussein, Mohamed and Ahmad, Rafiq (2022) Vision-based automated waste audits: a use case from the window manufacturing industry. International Journal of Advanced Manufacturing Technology, 119 (11-12). pp. 7735-7749. ISSN 0268-3768

McDowell, Liz, White, Su and Davis, Hugh (2004) Changing assessment practice in engineering : how can understanding lecturer perspectives help? European Journal of Engineering Education, 29 (2). pp. 173-181. ISSN 0304-3797

McGee, Olivia, Jiang, Huan, Qian, Feng, Jia, Zian, Wang, Lifeng, Meng, Han, Chronopoulos, Dimitrios, Chen, Yanyu and Zuo, Lei (2019) 3D printed architected hollow sphere foams with low-frequency phononic band gaps. Additive Manufacturing, 30. p. 100842. ISSN 2214-8604

McKay, Kevin, Bramall, David, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Design Change Impact Analysis during Early Design Specification. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 598-604. ISSN 0951-192X

McLaggan, M. S., Hadden, R. M. and Gillie, Martin (2018) Fire Performance of Phase Change Material Enhanced Plasterboard. Fire Technology, 54 (1). pp. 117-134. ISSN 0015-2684

McLaggan, Martyn S., Hadden, Rory M. and Gillie, Martin (2017) Flammability assessment of phase change material wall lining and insulation materials with different weight fractions. Energy and Buildings, 153. pp. 439-447. ISSN 0378-7788

Meng, Han, Ao, Q.B., Ren, S.W., Xin, F.X., Tang, H.P. and Lu, T.J. (2015) Anisotropic acoustical properties of sintered fibrous metals. Composites Science and Technology, 107. pp. 10-17. ISSN 0266-3538

Meng, Han, Chronopoulos, D., Fabro, A.T., Elmadih, W. and Maskery, I. (2020) Rainbow metamaterials for broadband multi-frequency vibration attenuation: Numerical analysis and experimental validation. Journal of Sound and Vibration, 465. p. 115005. ISSN 0022-460X

Meng, Han, Chronopoulos, Dimitrios and Fabro, Adriano T. (2020) Numerical simulation data for the dynamic properties of rainbow metamaterials. Data in Brief, 28. p. 104772. ISSN 2352-3409

Meng, Han, Chronopoulos, Dimitrios, Fabro, Adriano T., Maskery, Ian and Chen, Yanyu (2020) Optimal design of rainbow elastic metamaterials. International Journal of Mechanical Sciences, 165. p. 105185. ISSN 0020-7403

Meng, Han, Galland, M.A., Ichchou, M., Bareille, O., Xin, F.X. and Lu, T.J. (2017) Small perforations in corrugated sandwich panel significantly enhance low frequency sound absorption and transmission loss. Composite Structures, 182. pp. 1-11. ISSN 0263-8223

Meng, Han, Galland, M.A., Ichchou, M., Xin, F.X. and Lu, T.J. (2019) On the low frequency acoustic properties of novel multifunctional honeycomb sandwich panels with micro-perforated faceplates. Applied Acoustics, 152. pp. 31-40. ISSN 0003-682X

Micelli, Francesco, Corradi, Marco, Aiello, Maria and Borri, Antonio (2017) Properties of Aged GFRP Reinforcement Grids Related to Fatigue Life and Alkaline Environment. Applied Sciences, 7 (9). p. 897. ISSN 2076-3417

Moafi, Milad, Ardshiri, Reza Rouhi, Mudiyanselage, Dinithi Wijesooriya, Marzband, Mousa, Abusorrah, Abdullah, Rawa, Muhyaddin and Guerrero, Josep M. (2023) Optimal coalition formation and maximum profit allocation for distributed energy resources in smart grids based on cooperative game theory. International Journal of Power and Energy Systems, 144. p. 108492. ISSN 1078-3466

Mollón, Victoria, Bonhomme, Jorge, Elmarakbi, Ahmed, Viña, Jaime and Argüelles, Antonio (2015) Comparison of numerical, empirical and local partition methods in ADCB specimens. International Journal of Automotive Composites, 1 (4). pp. 299-312. ISSN 2051-8218

Morris, Robert, McHale, Glen, Dias, Tilak and Newton, Michael (2013) Embroidered Coils for Magnetic Resonance Sensors. Electronics, 2 (2). pp. 168-177. ISSN 2079-9292

Mozaffari, Amirpasha, Klotzsche, Anja, Warren, Craig, He, Guowei, Giannopoulos, Antonios, Vereecken, Harry and der Kruk, Jan Van (2020) 2.5D crosshole GPR full-waveform inversion with synthetic and measured data. Geophysics, 85 (4). H71-H82. ISSN 0016-8033

Nagamani, K., Reddy, Vasudeva Reddy Minnam, Lingappa, Yekula, Ramakrishna Reddy, Kotte and Miles, Robert (2012) Physical properties of ZnxCd1-xS nanocrystalline layers synthesized by solution growth method. International Journal of Optoelectronic Engineering, 2 (2). pp. 1-4. ISSN 2167-7301

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Aeromechanical Analysis of a Complete Wind Turbine Using Nonlinear Frequency Domain Solution Method. Journal of Engineering for Gas Turbines and Power, 143 (1). 011018. ISSN 0742-4795

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Direct Numerical Simulation of Interaction between Transient Flow and Blade Structure in a Modern Low-Pressure Turbine. International Journal of Mechanical Sciences, 192. p. 106104. ISSN 0020-7403

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Nonlinear Frequency Domain Solution Method for Aerodynamic and Aeromechanical Analysis of Wind Turbines. Renewable Energy, 167. pp. 66-81. ISSN 0960-1481

Navaratnam, Satheeskumar, Widdowfield Small, Deighton, Corradi, Marco, Perampalam, Gatheeshgar, Poologanathan, Keerthan and Higgins, Craig (2022) Numerical Modelling of Timber Beams with GFRP Pultruded Reinforcement. Buildings, 12 (11). p. 1992. ISSN 2075-5309

Naylor, Andrew and Hackney, Philip (2013) A review of wood machining literature with a special focus on sawing. BioResources, 8 (5). pp. 3122-3135. ISSN 1930-2126

Naylor, Andrew, Hackney, Philip, Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. Bioresources.com, 7 (3). pp. 2883-2894. ISSN 1930-2126

Ng, Wai Pang, Abd El Aziz, Ahmad, Ghassemlooy, Zabih, Aly, Moustafa and Ngah, Razali (2012) Optimised non-uniform biasing technique for a high-speed optical router to achieve uniform semiconductor optical amplifier gain. IET Communications, 6 (5). pp. 484-491. ISSN 1751-8628

Ogah, Ogah E., Zoppi, Guillaume, Forbes, Ian and Miles, Robert (2009) Thin films of tin sulphide for use in thin film solar cell devices. Thin Solid Films, 517 (7). pp. 2485-2488. ISSN 0040-6090

Oliver, Raymond and Toomey, Anne (2010) Design Drives - materials innovation. Ingenia, 42. pp. 39-43. ISSN 1472-9768

Ong, Huiling, Pang, Huafeng, Zhou, Jian, Tao, Ran, Agrawal, Prashant, Torun, Hamdi, Thummavichai, Kunyapat, Luo, Jingting, Tao, Kai, Wu, Qiang, Chang, Honglong and Fu, Yong Qing (2022) ZnO/glass thin film surface acoustic waves for efficient digital acoustofluidics and active surface cleaning. Materials Chemistry and Physics, 287. ISSN 0254-0584

Ouali, Fouzia, McHale, Glen, Javed, Haadi, Trabi, Christophe, Shirtcliffe, Neil and Newton, Michael (2013) Wetting considerations in capillary rise and imbibition in closed square tubes and open rectangular cross-section channels. Microfluidics and Nanofluidics, 15 (3). pp. 309-326. ISSN 1613-4982

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Comparative LCA of technology improvement opportunities for a 1.5 MW wind turbine in the context of an onshore wind farm. Clean Technologies and Environmental Policy, 20 (1). pp. 173-190. ISSN 1618-954X

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1565-1577. ISSN 0268-3768

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Fargani, Haitem (2016) A hybrid Stochastic Approach for Improving Uncertainty Analysis in the Design and Development of a Wind Turbine. Procedia CIRP, 56. pp. 19-24. ISSN 2212-8271

Papp, Bence, Donno, Daniela, Martin, James and Hartog, Arthur (2017) A study of the geophysical response of distributed fibre optic acoustic sensors through laboratory-scale experiments. Geophysical Prospecting, 65 (5). pp. 1186-1204. ISSN 0016-8025

Parsa, Maria, Harmand, Souad and Sefiane, Khellil (2018) Mechanisms of pattern formation from dried sessile drops. Advances in Colloid and Interface Science, 254. pp. 22-47. ISSN 0001-8686

Petropoulos, Evangelos, Shamurad, Burhan, Tabraiz, Shamas, Yu, Yongjie, Davenport, Russell, Curtis, Thomas P. and Dolfing, Jan (2021) Sewage treatment at 4 °C in anaerobic upflow reactors with and without a membrane – performance, function and microbial diversity. Environmental Science: Water Research & Technology, 7 (1). pp. 156-171. ISSN 2053-1400

Pillai, Gobind, Putrus, Ghanim, Georgitsioti, Tatiani and Pearsall, Nicola (2014) Near-term economic benefits from grid-connected residential PV (photovoltaic) systems. Energy, 68. pp. 832-843. ISSN 0360-5442

Pillai, Gobind, Putrus, Ghanim and Pearsall, Nicola (2014) Generation of synthetic benchmark electrical load profiles using publicly available load and weather data. International Journal of Electrical Power and Energy Systems, 61. pp. 1-10. ISSN 0142-0615

Popoola, Wasiu Oyewole, Ghassemlooy, Zabih, Haas, Harald, Leitgeb, Erich and Ahmadi, Vahid (2012) Error performance of terrestrial free space optical links with subcarrier time diversity. IET Communications, 6 (5). pp. 499-506. ISSN 1751-8628

Qi, Xiaohui, Yang, Zhiyong and Chu, Jian (2022) Prediction of interface of geological formations using generalized additive model. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 16 (1). pp. 127-139. ISSN 1749-9518

Rahmati, Mohammad and Aggidis, G. A. (2016) Numerical and experimental analysis of the power output of a point absorber wave energy converter in irregular waves. Ocean Engineering, 111. pp. 483-492. ISSN 0029-8018

Rahmati, Mohammad, Bahai, Hamid and Alfano, Giulio (2016) An accurate and computationally efficient small-scale nonlinear FEA of flexible risers. Ocean Engineering, 121. pp. 382-391. ISSN 0029-8018

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds using well-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Ramakrishna Reddy, Kotte, Sreedevi, Gedi, Ramya, Kottadi and Miles, Robert (2012) Physical properties of Nano-crystalline SnS2 layers grown by chemical bath deposition. Energy Procedia, 15. pp. 340-346. ISSN 1876-6102

Reddy, Vasudeva Reddy Minnam, Babu, P., Ramakrishna Reddy, Kotte and Miles, Robert (2013) X-ray photoelectron spectroscopy and X-ray diffraction studies on tin sulfide films grown by sulfurization process. Journal of Renewable and Sustainable Energy, 5 (3). 031613. ISSN 19417012

Richardson, Alan (2003) Hydropolis – The New Atlantis? International Civil Engineering Abstract. pp. 1-3. ISSN 0332-4095

Rigatos, Gerasimos, Siano, Pierluigi, Wira, Patrice, Busawon, Krishna and Binns, Richard (2020) A Nonlinear H-infinity Control Approach for Autonomous Truck and Trailer Systems. Unmanned Systems, 08 (01). pp. 49-69. ISSN 2301-3850

Sandhu, Jasmine, Yeoman, T. K., James, M. K., Rae, I. J. and Fear, R. C. (2018) Variations of High‐Latitude Geomagnetic Pulsation Frequencies: A Comparison of Time‐of‐Flight Estimates and IMAGE Magnetometer Observations. Journal of Geophysical Research: Space Physics, 123 (1). pp. 567-586. ISSN 2169-9380

Shahzad, Muhammad Wakil, Burhan, Muhammad, Ybyraiymkul, Doskhan, Oh, Seung Jin and Ng, Kim Choon (2019) An improved indirect evaporative cooler experimental investigation. Applied Energy, 256. p. 113934. ISSN 0306-2619

Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. Procedia Engineering, 63. pp. 931-937. ISSN 1877-7058

Shyha, Islam, Gariani, Salah and Bhatti, M. (2015) Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Procedia Engineering, 132. pp. 577-584. ISSN 1877-7058

Simons, Philippa and Cheung, Wai Ming (2016) Development of a Quantitative Analysis System for Greener and Economically Sustainable Wind Farms. Journal of Cleaner Production, 133. pp. 886-898. ISSN 0959-6526

Sun, Bo, Chen, Wenge, Zhang, Hui, Elmarakbi, Ahmed and Fu, Yong Qing (2023) Li2Si2O5 Nano-brush Coated Carbon Cloth as a Potential Solution for Wastewater Treatment. Separation and Purification Technology, 310. p. 123085. ISSN 1873-3794

Sun, Chao, Mikhaylov, Roman, Fu, Richard, Wu, Fangda, Wang, Hanlin, Yuan, Xichen, Xie, Zhihua, Liang, Dongfang, Wu, Zhenlin and Yang, Xin (2021) Flexible Printed Circuit Board as Novel Electrodes for Acoustofluidic Devices. IEEE Transactions on Electron Devices, 68 (1). pp. 393-398. ISSN 0018-9383

Tan, K., Perera, Noel and Tan, Kian (2019) An integrated experimental and numerical method to assess the fatigue performance of recycled rail. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 5988-6006. ISSN 2289-4659

Tan, Kaitao, Ji, Zhangbin, Zhou, Jian, Deng, Zijing, Zhang, Songsong, Gu, Yuandong, Guo, Yihao, Zhuo, Fengling, Duan, Huigao and Fu, Yong Qing (2023) Machine Learning Empowered Thin Film Acoustic Wave Sensing. Applied Physics Letters, 122 (1). 014101. ISSN 0003-6951

Tang, Yufan, Ren, Shuwei, Meng, Han, Xin, Fengxian, Huang, Lixi, Chen, Tianning, Zhang, Chuanzeng and Lu, Tian Jian (2017) Hybrid acoustic metamaterial as super absorber for broadband low-frequency sound. Scientific Reports, 7 (1). ISSN 2045-2322

Tao, Zhi, Wu, Hongwei, Chen, Guohua and Deng, Hongwu (2005) Numerical Simulation of Conjugate Heat and Mass Transfer Process within Cylindrical Porous Media with Cylindrical Dielectric Cores in Microwave Freeze-drying. International Journal of Heat and Mass Transfer, 48 (3/4). pp. 561-572. ISSN 0017-9310

Tao, Zhi, Yang, Xiaojun, Ding, Shuiting, Xu, Guoqiang, Wu, Hongwei, Deng, Hongwu and Luo, Xiang (2008) Experimental Study of Rotation Effect on Film Cooling over the Flat Wall with a Single Hole. Experimental Thermal and Fluid Science, 32 (5). pp. 1081-1089. ISSN 0894-1777

Tao, Zhi, Zhao, Zhenming, Ding, Shuiting, Xu, Guoqiang and Wu, Hongwei (2009) Suitability of Three Different Two-equation Turbulent Models in Predicting Film Cooling Performance Over a Rotating Blade. International Journal of Heat and Mass Transfer, 52 (5-6). pp. 1268-1275. ISSN 0017-9310

Taoufik, Anass, Defoort, Michael, Djemai, Mohamed and Busawon, Krishna (2022) A distributed fault detection scheme in disturbed heterogeneous networked systems. Nonlinear Dynamics, 107 (3). pp. 2519-2538. ISSN 0924-090X

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowarajoo, Meheron (2021) Prediction model for hardened state properties of silica fume and fly ash based seawater concrete incorporating silicomanganese slag. Journal of Building Engineering, 41. p. 102356. ISSN 2352-7102

Tzavellos, Stelios, Pesce, Giovanni, Wu, Yu, Henry, Alison, Robson, Simon and Ball, Richard J. (2019) Effectiveness of Nanolime as a Stone Consolidant: A 4-Year Study of Six Common UK Limestones. Materials, 12 (17). p. 2673. ISSN 1996-1944

Umer, Waleed and Siddiqui, Mohsin K. (2020) Use of Ultra Wide Band Real-Time Location System on Construction Jobsites: Feasibility Study and Deployment Alternatives. International Journal of Environmental Research and Public Health, 17 (7). p. 2219. ISSN 1661-7827

Ushasree, Palat and Szablewski, M. (2016) An Investigation into the Role of Capping on Second Harmonic Generation from Nonlinear Organic Polymer and Guest-Host Thin Films by In-situ Poling. Optics and Photonics Journal, 6 (5). pp. 101-111. ISSN 2160-889X

Vichare, Parag, Zhang, Xianzhi, Dhokia, Vimal, Cheung, Wai Ming, Xiao, Wenlei and Zheng, Lianyu (2018) Computer Numerical Control Machine Tool Information Reusability within Virtual Machining Systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 593-604. ISSN 0954-4054

Vijayakumar, V., Subramaniyaswamy, V., Abawajy, Jemal, Yang, Longzhi, Vijayakumar, V., Subramaniyaswamy, V., Abawajy, Jemal and Yang, Longzhi (2019) Intelligent, smart and scalable cyber-physical systems [Editorial]. Journal of Intelligent and Fuzzy Systems, 36 (5). pp. 3935-3943. ISSN 1064-1246

Viola, Giuseppe, Ning, Huanpo, Wei, Xiaojong, Deluca, Marco, Adomkevicius, Arturas, Khaliq, Jibran, Reece, Michael and Yan, Haixue (2013) Dielectric relaxation, lattice dynamics and polarization mechanisms in Bi0.5Na0.5TiO3-based lead-free ceramics. Journal of Applied Physics, 114 (1). 014107. ISSN 0021-8979

Vo, Thuc, Thai, Huu-Tai and Aydogdu, Metin (2017) Free vibration of axially loaded composite beams using a four-unknown shear and normal deformation theory. Composite Structures, 178. pp. 406-414. ISSN 0263-8223

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Lanc, Domagoj and Karamanli, Armagan (2017) Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory. Composite Structures, 176. pp. 388-397. ISSN 0263-8223

Wan, Chaoying, Zhao, Feng, Bao, Xujin, Kandasubramanian, Bala and Duggan, Matt (2008) Surface Characteristics of Polyhedral Oligomeric Silsesquioxane Modified Clay and Its Application in Polymerization of Macrocyclic Polyester Oligomers. The Journal of Physical Chemistry B, 112 (38). pp. 11915-11922. ISSN 1520-6106

Wang, Chao, Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Yang, Bo (2016) A two-dimensional splashing model for investigating impingement characteristics of Supercooled Large Droplets. International Journal of Multiphase Flow, 80. pp. 131-149. ISSN 0301-9322

Wang, Chao, Chang, Shinan, Wu, Hongwei and Xu, J. (2014) Modeling of Drop Breakup in the Bag Breakup Regime. Applied Physics Letters, 104 (15). p. 154107. ISSN 0003-6951

Wang, Kai, Wu, Hongwei, Wang, Dongyu, Tong, Z., Lin, F. and Olabi, Abdul (2015) Experimental Study on a Coiled Tube Solar Receiver under Variable Solar Radiation Condition. Solar Energy, 122. pp. 1080-1090. ISSN 0038-092X

Wang, Sichu, Sun, Pengfei, Zhang, Guangbin, Gray, Neil, Dolfing, Jan, Esquivel-Elizondo, Sofia, Peñuelas, Josep and Wu, Yonghong (2022) Contribution of periphytic biofilm of paddy soils to carbon dioxide fixation and methane emissions. The Innovation, 3 (1). p. 100192. ISSN 2666-6758

Wang, Yu-Lin, Liu, Bin, Pang, Yi-Neng, Liu, Juan, Shi, Jiu-Lin, Wan, Sheng-Peng, He, Xing-Dao, Yuan, Jinhui and Wu, Qiang (2021) Low-cost wearable sensor based on a D-shaped plastic optical fiber for respiration monitoring. IEEE Transactions on Instrumentation and Measurement, 70. p. 4004808. ISSN 0018-9456

Warren, Craig (2014) MATLAB for Engineers: Development of an Online, Interactive, Self-study Course. Engineering Education, 9 (1). pp. 86-93. ISSN 1750-0052

Warren, Craig, Giannopoulos, Antonios, Gray, Alan, Giannakis, Iraklis, Patterson, Alan, Wetter, Laura and Hamrah, Andre (2019) A CUDA-based GPU engine for gprMax: open source FDTD electromagnetic simulation software. Computer Physics Communications, 237. pp. 208-218. ISSN 0010-4655

Wei, Chongfeng and Olatunbosun, Oluremi Ayotunde (2016) The effects of tyre material and structure properties on relaxation length using finite element method. Materials & Design, 102. pp. 14-20. ISSN 0264-1275

Wei, Chongfeng, Romano, Richard, Hajiseyedjavadi, Foroogh, Merat, Natasha and Boer, Erwin (2019) Driver-centred Autonomous Vehicle Motion Control within A Blended Corridor. IFAC-PapersOnLine, 52 (5). pp. 212-217. ISSN 2405-8963

Wei, Chongfeng and Yang, Xiaoguang (2016) Static tire properties analysis and static parameters derivation to characterising tire model using experimental and numerical solutions. Journal of Advances in Vehicle Engineering, 24 (1). pp. 1-20. ISSN 2423-7345

Wei, Jiacheng, Atif, Rasheed, Vo, Thuc and Inam, Fawad (2015) Graphene nanoplatelets in epoxy system: dispersion, reaggregation, and mechanical properties of nanocomposites. Journal of Nanomaterials (JNM), 2015. p. 561742. ISSN 1687-4110

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation. Royal Society Open Science, 4 (170778). ISSN 2054-5703

Wen, Ziying, Gu, Cuiping, Yin, Yanjun, Bayati, Maryam, Liu, Xiaoteng and Huang, Jiarui (2021) Ultra-thin N-doped carbon coated SnO2 nanotubes as anode material for high performance lithium-ion batteries. Applied Surface Science, 568. p. 150969. ISSN 0169-4332

Wiratama, I. Kade and Maheri, Alireza (2014) Optimal design of wind turbine blades equipped with flaps. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1511-1515. ISSN 1819-6608

Wu, Hongwei, Jouhara, H., Tassou, Savvas and Karayiannis, Tassos (2012) Modelling of Energy Flows in Potato Crisp Frying Processes. Applied Energy, 89 (1). pp. 81-88. ISSN 0306-2619

Wu, Hongwei, Karayiannis, Tassos and Tassou, Savvas (2013) A Two-dimensional Frying Model for the Investigation and Optimisation of Continuous Industrial Frying System. Applied Thermal Engineering, 51 (1-2). pp. 926-936. ISSN 1359-4311

Wu, Hongwei, Tao, Zhi, Chen, Guohua, Deng, Hongwu, Xu, Guoqiang and Ding, Shuiting (2004) Conjugate Heat and Mass Transfer Process within Porous Media with Dielectric Cores in Microwave Freeze-drying. Chemical Engineering Science, 59 (14). pp. 2921-2928. ISSN 0009-2509

Wu, Hongwei, Tao, Zhi, Gao, Ping and Chen, Guohua (2004) Ice Crystal Sizes and Their Impact on Microwave Assisted Freeze Drying. Chinese Journal of Chemical Engineering, 12 (6). pp. 831-835. ISSN 1004 9541

Wu, Hongwei, Tassou, Savvas, Karayiannis, T. G. and Jouhara, H. (2013) Analysis and Simulation of Continuous Food Frying Processes. Applied Thermal Engineering, 52 (2). pp. 332-339. ISSN 1359-4311

Wu, Hongwei, Tassou, Savvas and Karayiannis, Tassos (2013) Modelling and control approaches for energy reduction in continuous frying systems. Applied Energy, 112. pp. 939-948. ISSN 0306-2619

Xie, Liyao, Xie, Yongqi, Wu, Hongwei and Yu, Jianzu (2014) High Gravity Influence on Boiling Heat Transfer in Helical Coils. International Journal of Heat and Mass Transfer, 73. pp. 706-715. ISSN 0017-9310

Xie, Yongqi, Zhang, Jie, Xie, Liyao, Yu, Yin, Wu, Hongwei, Zhang, Hongxing and Gao, Hongxia (2015) Experimental Investigation On the Operating Characteristics of a Dual Compensation Chamber Loop Heat Pipe Subjected to Acceleration Field. Applied Thermal Engineering, 81. pp. 297-312. ISSN 1359-4311

Xing, Lu, Li, Liheng, Nan, Chi and Hu, Pingfang (2017) The Effects of Different Land Covers on Foundation Heat Exchangers Design in Chinese Rural Areas. Procedia Engineering, 205. pp. 2449-2456. ISSN 1877-7058

Xiong, Ying, Xing, Zhuo, Weng, Juhai, Ma, Chi, Khaliq, Jibran and Li, Chunchun (2021) Low-temperature sintering, dielectric performance, and far-IR reflectivity spectrum of a lightweight NaCaVO4 with good chemical compatibility with silver. Ceramics International, 47 (15). pp. 22219-22224. ISSN 0272-8842

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2009) Numerical Study of Film-Cooling Performance on a Rotating Model. Journal of Thermophysics and Heat Transfer, 23 (1). pp. 129-138. ISSN 0887-8722

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Zhao, Zhenming and Wu, Hongwei (2009) Local Heat Transfer Measurements on a Rotating Flat Blade Model with a Single Film Hole. Progress in Natural Science: Materials International, 19 (3). pp. 321-330. ISSN 1002-0071

Xu, Yuchun, Erkoyuncu, John Ahmed, Bankole, Oyetola, Goh, Yee Mey, Cheung, Wai Ming, Baguley, Paul, Wang, Qing, Arundachawat, Panumas, Shehab, Essam, Newnes, Linda and Roy, Rajkumar (2012) Cost engineering for manufacturing: current and future research. International Journal of Computer Integrated Manufacturing, 25 (4/5). pp. 300-314. ISSN 0951-192X

Yin, Kaiyang, Xiang, Kui, Pang, Muye, Chen, Jing, Anderson, Philip and Yang, Longzhi (2019) Personalised Control of Robotic Ankle Exoskeleton Through Experience-Based Adaptive Fuzzy Inference. IEEE Access, 7. pp. 72221-72233. ISSN 2169-3536

Zhang, Luqi, Yuan, Jinhui, Cheng, Yujun, Mei, Chao, Zhou, Xian, Wu, Qiang, Yan, Binbin, Wang, Kuiru, Yu, Chongxiu and Sang, Xinzhu (2022) Supercontinuum and frequency comb generations in the slot SiC waveguide with four zero-dispersion wavelengths. Optik, 266. p. 169561. ISSN 0030-4026

Zhang, Shichao, Wu, You, Gao, Feng, Shang, Huiming, Zhang, Jia, Li, Zhonghua, Fu, Yong Qing and Hu, PingAn (2022) Field effect transistor sensors based on in-plane 1T´/2H/1T´ MoTe2 heterophases with superior sensitivity and output signals. Advanced Functional Materials, 32 (41). p. 2205299. ISSN 1616-301X

Zhang, Yufei, Zheng, Junjie, Nan, Jiejie, Gai, Chengjie, Shao, Qian, Murugadoss, Vignesh, Maganti, Srihari, Naik, Nithesh, Algadi, Hassan, Huang, Mina, Xu, Bin and Guo, Zhanhu (2023) Influence of mass ratio and calcination temperature on physical and photoelectrochemical properties of ZnFe-layered double oxide/cobalt oxide heterojunction semiconductor for dye degradation applications. Particuology, 74. pp. 141-155. ISSN 1674-2001

Zhang, Zhehui, Sridhar, Sreepathy, Wei, Guoying, Yu, Yundan, Zhang, Zhongquan, Jiang, Li, Yang, Yumeng, Shahzad, Muhammad Wakil, Chen, Xue and Xu, Bin (2021) A Highly Controlled Fabrication of Porous Anodic Aluminium Oxide Surface with Versatile Features by Spatial Thermo-anodization. Surface and Coatings Technology, 408. p. 126809. ISSN 0257-8972

Zhao, Jie, Cheung, Wai Ming and Young, Robert (1999) A Consistent Manufacturing Data Model to Support Virtual Enterprises. International Journal of Agile Management Systems, 1 (3). pp. 150-158. ISSN 1465-4652

Zhao, Zhijian, Ling, Chen, Wang, Dan, Wang, Jie-Xin, Saczek, Joshua, Pramana, Stevin, Sridhar, Sreepathy, Shang, Jin, Xu, Bin, Chen, Jian-Feng and Wang, Steven (2020) Liquid Marbles in Liquid. Small, 16 (37). p. 2002802. ISSN 1613-6810

Zheng, Feng, Shao, Ling, Racic, Vitomir and Brownjohn, James (2016) Measuring human-induced vibrations of civil engineering structures via vision-based motion tracking. Measurement, 83. pp. 44-56. ISSN 0263-2241

Zhu, Hao, Ao, Dongyi, Zhang, Wenting, Zhang, Ruijie, Shi, Xing, Zu, Xiaotao, Wang, Bangji, Wang, Hongyan, Fu, Richard and Tang, Yongliang (2021) Real-time monitoring of airborne molecular contamination on antireflection silica coatings using surface acoustic wave technology. Sensors and Actuators A: Physical. p. 112796. ISSN 0924-4247

Zhu, Jianqin, Wang, Kai, Wu, Hongwei, Wang, Dunjin, Du, Juan and Olabi, A. (2015) Experimental Investigation on the Energy and Exergy Performance of a Coiled Tube Solar Receiver. Applied Energy, 156. pp. 519-527. ISSN 0306-2619

Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2006) Multiplex Shear Stress-induced Nucleation in Dynamic Microcellular Foaming Process. Polymer Engineering and Science, 46 (12). pp. 1728-1738. ISSN 1548-2634

Book Section

Ademi, Sul, Jovanovic, Milutin and Obichere, Jude (2014) Comparative analysis of control strategies for large doubly-fed reluctance wind generators. In: World Congress on Engineering and Computer Science 2014. Lecture Notes in Engineering and Computer Science, 1 . Newswood Limited, pp. 245-250. ISBN 978-988192520-6

Ahmed, Rihan, Gu, Da-Wei and Postlethwaite, Ian (2011) System structure configuration and actuator degradation. In: Proceedings of the 2011 Chinese Control and Decision Conference (CCDC). IEEE, Piscataway, NJ, pp. 2647-2652. ISBN 978-1424487370

Amedu, Osaighe Kennedy, Penlington, Roger, Busawon, Krishna and Morgan, Andy (2013) A lumped parameter control model for twin-screw extruders. In: Systems and Control (ICSC), 2013 3rd International Conference on. IEEE, Piscataway, NJ, pp. 563-569. ISBN 978-1479902736

Bohemia, Erik (2004) Online-based teaching can facilitate skills development for today's global manufacturing environment. In: Innovations 2004: World Innovations in Engineering Education and Research. iNEER. ISBN 9780974125213

Borri, Antonio, Castori, Giulio and Corradi, Marco (2012) Masonry confinement with SRP composites. In: Proceedings of the International Conference on Structural Analysis of Historical Constructions, SAHC 2012. DWE, Wroclaw, pp. 1771-1779. ISBN 978-8371252167

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2004) Rinforzo di strutture lignee mediante materiali compositi FRP modellazione progetto e sperimentazione. In: Il Manuale del legno strutturale: Interventi sulle strutture. Mancosu, Rome, pp. 164-189. ISBN 9788887017410

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2006) Sull’utilizzo dei materiali FRP per il rinforzo delle strutture lignee. In: Lignea: Studi sulla conservazione e il restauro del patrimonio artistico e architettonico ligneo. Quattroemme, pp. 349-398. ISBN 9788885962897

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2010) A reinforced repointing grid for strengthening historic stone masonry walls. In: 8th International Masonry Conference 2010 in Dresden. International Masonry Society, pp. 1851-1860.

Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Assessment of professional competencies and mobility of engineers in Europe. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 978-1907632167

Chaal, Hamza and Jovanovic, Milutin (2010) Second order sliding mode control of a DC drive with uncertain parameters and load conditions. In: Proceedings of the 2010 Chinese Control and Decision Conference. IEEE, Piscataway, NJ, pp. 3204-3208. ISBN 978-1424451814

Chaddad, Ahmad, Bouridane, Ahmed and Tanougast, Camel (2015) Continuum analysis of colorectal cancer using texture feature extraction. In: Proceedings of the 45th International Conference on Computers & Industrial Engineering 2015 (CIE45). Computers & Industrial Engineering, pp. 1423-1430. ISBN 9781510817456

Chandra, Bharani, Srikanthan, Hemnath, Gu, Da-Wei, Bandyopadhyay, Bijnan and Postlethwaite, Ian (2012) Discrete-time sliding mode control using an H∞ filter for a quadruple tank system. In: Proceedings of the 2012 12th International Workshop on Variable Structure Systems. IEEE, Piscataway, NJ, pp. 349-354. ISBN 978-1457720659

Chen, Chin-Fan, Wang, Chi-Jo, Maheri, Alireza and Macquart, Terence (2016) Wind turbine blade load alleviation performance employing individual pitch control. In: Proceedings of the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014). Lecture Notes in Electrical Engineering, 345 . Springer, London, pp. 215-224. ISBN 9783319173139

Daadbin, Ali and Rosinski, Jarek (2010) Development, testing and implementation of the pantograph damage assessment system (PANDAS). In: Computers in Railways XII : Computer System Design and Operation in the Railway and Other Transit Systems. WIT Press, Southampton, pp. 573-580. ISBN 978-1845644680

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2012) An assessment of solar irradiance stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 670-675. ISBN 978-1467329095

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2012) An assessment of wind speed stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 623-627. ISBN 978-1467329095

ElBanhawy, Eiman, Dalton, Ruth and Nassar, Khaled (2013) Integrating space-syntax and discrete-event simulation for e-mobility analysis. In: AEI 2013: Building Solutions for Architectural Engineering. American Society of Civil Engineers, Reston, VA, pp. 934-945. ISBN 9780784412909

Elmarakbi, Ahmed (2011) Finite Element Analysis of Delamination Growth in Composite Materials using LS-DYNA: Formulation and implementation of new cohesive elements. In: Advances in Composite Materials: Ecodesign and Analysis. Intechopen, pp. 409-428. ISBN 978-953-307-150-3

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2018) A Machine Learning Approach For Simulating Ground Penetrating Radar. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, pp. 1-4. ISBN 978-1-5386-5778-2

Giannopoulos, Antonios and Warren, Craig (2017) Foreword of IWAGPR2017 - the 9th International Workshop on Advanced Ground Penetrating Radar. In: 2017 9th International Workshop on Advanced Ground Penetrating Radar (IWAGPR). IEEE. ISBN 978-1-5090-5485-5

Halliday, Douglas, Williams, Ben, Durose, Ken, Mendis, B., Kartopu, Giray, Irvine, Stuart, Zoppi, Guillaume and Forbes, Ian (2012) CdTe/CdS core-shell nanowire structures on glass substrates for photovoltaic applications - growth and characterization. In: Proceedings of the 2011 37th IEEE Photovoltaic Specialists Conference (PVSC),. IEEE, Piscataway, NJ, pp. 234-238. ISBN 978-1424499663

Hartley, John, Giannopoulos, Antonios and Warren, Craig (2018) A Huygens subgridding approach for efficient modelling of Ground Penetrating Radar using the Finite-Difference Time-Domain method. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, pp. 1-6. ISBN 978-1-5386-5778-2

Haworth, Luke, Hosseini Biroun, Seyedmehdi, Agrawal, Prashant, Torun, Hamdi, Orme, Bethany, Rahmati, Mohammad and Fu, Richard (2021) Droplet impact dynamics on hydrophobic and slippery liquid-infused porous surfaces controlled by propagating surface acoustic waves. In: Acoustofluidics 2021. Ultrasonic Standing Wave Network, San Diego, US, p. 16.

Hughes, Paul, Glendinning, Stephanie, Davies, O. and Mendes, Joao (2008) Construction and monitoring of a test embankment for evaluation of the impacts of climate change on UK transport infrastructure. In: Advances in Transportation Geotechnics - Proceedings of the 1st International Conference on Transportation Geotechnics. Taylor & Francis, pp. 495-499. ISBN 9780415475907

Kabore, Pousga and Busawon, Krishna (2002) A mixed-integer formulation for fault detection and diagnosis: Modelling and an illustrative example. In: Proceedings of the 5th Biannual World Automation Congress. IEEE, Piscataway, NJ, pp. 417-422. ISBN 9781889335193

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2012) Reliability criteria in optimal sizing of stand-alone hybrid wind-PV-battery bank system. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 184-189. ISBN 978-1467329095

Khaled, Mahmoud, Ramadan, Mohamad, Elmarakbi, Ahmed and Fourment, Lionel (2015) Simulation of Incremental Forming Processes Using a Thermo-Mechanical Partitioned Algorithm. In: Key Engineering Materials. Trans Tech Publications Inc, pp. 1331-1336. ISBN 9783038354710

Khaled, Yassine, Barbot, Jean Pierre, Busawon, Krishna and Benmerzouk, Djamila (2013) From restricted isometry property to observability under sparse measurement. In: Systems and Control (ICSC), 2013 3rd International Conference on. IEEE, Piscataway, NJ, pp. 123-128. ISBN 978-1479902736

Lacey, Gillian and Putrus, Ghanim (2015) Controlling EV Charging Schedules: Supporting the Grid and Protecting Battery Life. In: Proceedings of the 12th IEEE Vehicle Power and Propulsion Conference, VPPC 2015. IEEE, Piscataway, NJ. ISBN 978-146737637-2

Li, Jennifer, Kassem, Mohamad, Ciribini, A.L.C. and Bolpagni, M. (2019) A Proposed Approach Integrating DLT, BIM, IoT and Smart Contracts: Demonstration Using a Simulated Installation Task. In: International Conference on Smart Infrastructure and Construction 2019 (ICSIC): Driving data-informed decision-making. ICE Publishing, London, pp. 275-282. ISBN 9780727764669, 9780727764676

Maheri, Alireza, Bagali, Rahul, Chilak, C., Scheller, F. and Mustafa, A. I. (2012) Deterministic versus nondeterministic design of hybrid renewable energy systems. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 212-217. ISBN 978-1467329095

Martinez, Victor, English, Stuart and Conti, Matteo (2012) Sustainable car lifecycle design: Taking inspiration from natural systems and thermodynamics. In: Environment Friendly Energies and Applications (EFEA), 2012 2nd International Symposium on. IEEE, Piscataway, NJ, pp. 62-67. ISBN 978-1467329095

McHale, Glen (2016) Wetting properties of surfaces and drag reduction. In: Non-Wettable Surfaces. Soft Matter . Royal Society of Chemistry, London, pp. 253-284. ISBN 978-1-78262-154-6

Mendes, Joao, Toll, D. G., Augarde, C. E. and Gallipoli, Domenico (2008) A system for field measurement of suction using high capacity tensiometers. In: Unsaturated Soils: Advances in Geo-Engineering - Proceedings of the 1st European Conference on Unsaturated Soils, E-UNSAT 2008. Taylor & Francis, pp. 219-225. ISBN 9780415476928

Meng, Han, Chronopoulos, Dimitrios and Fabro, Adriano (2019) A Rainbow Metamaterial For Broadband Multi-frequency Vibration Suppression. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings: InterNoise19. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 2995-3 . Institute of Noise Control Engineering, United States, pp. 2995-3992.

Meng, Han, Chronopoulos, Dimitrios, Fabro, Adriano, Elmadih, Waiel and Leach, Richard (2020) Optimal design of rainbow metamaterials. In: MEDYNA2020, 3rd Euro-Mediterranean Conference on Structural Dynamics and Vibroacoustics. UNSPECIFIED.

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming and Goh, Yee Mey (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer, London, pp. 135-151. ISBN 978-1441983213

Padwick, Annie, Dele-Ajayi, Opeyemi, Davenport, Carol and Strachan, Rebecca (2016) Innovative methods for evaluating the science capital of young people. In: Frontiers in Education Conference (FIE), 2016 IEEE. IEEE.

Perera, Noel and Penlington, Roger (2012) Supporting the attainment of professional attributes in a work based learning programme. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 978-1907632167

Putrus, Ghanim, Lacey, Gillian and Bentley, Edward (2015) Towards the integration of electric vehicles into the smart grid. In: E-Mobility in Europe. Springer, London, pp. 345-366. ISBN 9783319131931

Rani, C., Kothari, Dwarkadas Pralhaddas and Busawon, Krishna (2013) Chaotic self adaptive particle swarm approach for solving economic dispatch problem with valve-point effect. In: 2013 International Conference on Power, Energy and Control (ICPEC). IEEE, Piscataway, NJ, pp. 405-410. ISBN 978-1-4673-6027-2

Rathnasinghe, Akila, Weerasinghe, L., Abeynayake, M. and Kulatunga, U. (2020) The evolution of information flows in construction projects: a contemporary study on the embracing of Augmented Reality. In: Imaginable Futures: Design Thinking, and the Scientific Method: 54th International Conference of the Architectural Science Association 2020. Architectural Science Association (ANZAScA), Auckland, New Zealand, pp. 1105-1114. ISBN 9780992383572

RazaviAlavi, SeyedReza, AbouRizk, Simaan and Alanjari, Pejman (2014) Estimating the size of temporary facilities in construction site layout planning using simulation. In: Construction Research Congress 2014: Construction in a Global Network - Proceedings of the 2014 Construction Research Congress, May 19–21, 2014 Atlanta, Georgia, USA. American Society of Civil Engineers (ASCE), Reston, Virginia, United States, pp. 70-79. ISBN 9780784413517

Rigatos, G., Siano, P., Wira, P., Busawon, Krishna and Jovanovic, Milutin (2018) Nonlinear H-Infinity Control for Optimizing Cement Production. In: 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, pp. 248-253. ISBN 978-1-5090-6411-3

Robinson, Paul, Hasan, Reaz and Tudor, Jenna (2013) Numerical Simulation of Flow and Heat Transfer in Spent Fuel Cooling Ponds. In: Proceedings of The World Congress on Engineering 2013. Lecture Notes in Engineering and Computer Science, III . Newswood Limited, Hong Kong, pp. 1861-1864. ISBN 978-9881925299

Sedef, Kanber, Maheri, Alireza, Daadbin, Ali and Yilmaz, Mustafa (2012) A comparative study of the performance of DC permanent magnet and AC induction motors in urban electric cars. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 100-105. ISBN 978-1467329095

Speranzini, Emanuela, Corradi, Marco, Giannantoni, Andrea and Borri, Antonio (2010) Consolidation and reinforcement of stone walls using a reinforced repointing grid. In: Structural Analysis of Historic Construction: Preserving Safety and Significance. CRC Press, Boca Raton, FL, pp. 981-989. ISBN 978-0-415-46872-5

Suntharalingam, Thadshajini, Nagaratnam, Brabha, Poologanathan, Keerthan, Hackney, Philip and Ramli, Jeffri (2020) Effect of polypropylene fibres on the workability parameters of extrudable cementitious materials. In: Second RILEM International Conference on Concrete and Digital Fabrication: DC 2020. RILEM Bookseries (28). Springer, Cham, pp. 516-526. ISBN 9783030499150, 9783030499167

Tao, Zhi, Zhao, Zhenming, Ding, Shuiting, Xu, Guoqiang, Yang, Bin and Wu, Hongwei (2008) Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part I. Effect of Blowing Ratio. In: ASME Proceedings: Heat Transfer. American Society of Mechanical Engineers, pp. 521-531. ISBN 978-0-7918-4314-7

Tudor, Jenna and Penlington, Roger (2020) Valuing diversity and establishing an approach to supporting excluded groups. In: The Proceedings of the 7th Annual Conference of the UK & Ireland Engineering Education Research Network : Excellence in Engineering Education for the 21st Century:The Role of Engineering Education Research. WMG, University of Warwick, Coventry, pp. 164-175. ISBN 9780993424571

Wei, Chongfeng, Romano, Richard, Merat, Natasha, Hajiseyedjavadi, Foroogh, Solernou, Albert, Paschalidis, Evangelos and Boer, Erwin R. (2020) Achieving Driving Comfort of AVs by Combined Longitudinal and Lateral Motion Control. In: Advances in Dynamics of Vehicles on Roads and Tracks. Lecture Notes in Mechanical Engineering . Springer, pp. 1107-1113. ISBN 9783030380762

Wu, Hongwei, Xu, Guoqiang, Yang, Bin and Tao, Zhi (2008) Heat transfer coefficients of film cooling on a rotating turbine blade model: Part II - effect of Reynolds number and rotation number. In: Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, New York, pp. 533-541. ISBN 9780791843147

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2008) Theoretical analysis of rotating film cooling mechanism: Part II. A new dimensionless parameter to describe the coolant deflection phenomenon near the pressure surface. In: Proceedings of the 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2008 (ISROMAC-12). ISROMAC-12, New York, pp. 697-702. ISBN 9781605604879

van der Kruk, Jan, Liu, T., Mozaffari, Amirpasha, Gueting, N., Klotzsche, Anja, Vereecken, Harry, Warren, Craig and Giannopoulos, Antonios (2018) GPR full-waveform inversion, recent developments, and future opportunities. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, p. 8441667. ISBN 978-1-5386-5778-2

Report

Kotter, Richard, Wang, Yue, Putrus, Ghanim, Das, Ridoy, O'Brien, Geoffrey, Dai, Xuewu, Cao, Yue, Bentley, Edward, Heller, Renee, Prateek, Ramesh and Gough, Becky (2018) SEEV4City INTERIM 'Summary of the State of the Art' report. Project Report. NSR Interreg, Newcastle & Amsterdam. (Submitted)

Levermore, Geoff, Courtney, Roger, Watkins, Richard, Cheung, Henry, Parkinson, John, Laycock, Patrick, Natarajan, Sukumar, Nikolopoulou, Marialena, McGillican, Charles, Muneer, Tariq, Tham, Yieng Wei, Underwood, Chris, Edge, Jerry, Du, Hu, Sharples, Steve, Kang, Jian, Barclay, Michael and Sanderson, Michael (2012) Deriving and using future weather data for building design from UK climate change projections – an overview of the COPSE Project. Manchester University, UK. Project Report. ARCC, Manchester.

Underwood, Chris and Giddings, Bob (2009) A research study on Hong Kong's building services engineering profession: a review of the building services engineering profession in the United Kingdom. Project Report. Hong Kong Institution of Engineers.

Conference or Workshop Item

Abd El Aziz, Ahmad, Ng, Wai Pang, Ghassemlooy, Zabih, Aly, Moustafa and Ngah, Razali (2010) Employing wavelength diversity to improve SOA gain uniformity. In: The 15th European conference on Networks and Optical Communications, 8-10 June 2010, Faro, Algarve, Portugal.

Abdullah, Albradan, Tan, Kian and Cheung, Wai Ming (2013) Factors Influence ISO 9000 Implementation in Saudi Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September 2013, Cranfield University.

Aggoune, Woihida and Busawon, Krishna (2010) A Remark on Stabilization of Nonlinear Systems with Discrete and Distributed Delays. In: 8th IFAC Symposium on Nonlinear Control Systems, 1-3 September 2010, University of Bologna, Italy.

Algabasi, Abdullatif and Maheri, Alireza (2015) A genetic algorithm for solving classical job shop scheduling problems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Ameli, Masoud, Agnew, Brian, Ng, Bobo, McGlen, R. J., Sutcliffe, C. J. and Singh, J. (2012) Sintered aluminium heat pipe (SAHP). In: 16th International Heat Pipe Conference (16th IHPC), 20-24 May 2012, Lyon, France.

Bastianini, Filippo, Borri, Antonio, Corradi, Marco and di Tommaso, Angelo (2003) Composite seismic retrofit and distributed fiber optic monitoring of historical building in Foligno. In: 10th Structural Faults and Repair 2003, 1 - 3 July 2003, London, UK.

Beattie, Neil, Moir, Robert, Roberts, Simon, Buffoni, Giorgio, Graham, Paul and Pearsall, Nicola (2011) Sand and dust accumulation on photovoltaic modules in dry regions. In: 7th Photovoltaic Science Applications and Technology (PVSAT-7), 6 -8 April 2011, Herriot Watt University, Edinburgh, UK.

Bentley, Edward, Putrus, Ghanim and Lacey, Gillian (2014) A Modelling Tool for Distribution Networks to Demonstrate Smart Grid Solutions. In: VPPC 2014: IEEE Vehicle Power and Propulsion Conference, 27th - 30th October 2014, Coimbra, Portugal.

Binda, Luigia, Borri, Antonio, Corradi, Marco and Tedeschi, Cristina (2005) Experimental evaluation of shear and compression strength of masonry wall before and after reinforcement: deep repointing. In: 1st Canadian Conference on Effective Design of Structures, 10 - 13 July 2005, McMaster University, Ontario.

Borri, Antonio, Castori, Giulio and Corradi, Marco (2012) Evaluation of shear strength of masonry panels through different experimental analyses. In: 14th Structural Faults and Repair, 3 - 5 July 2012, Edinburgh, Scotland.

Borri, Antonio, Castori, Giulio and Corradi, Marco (2008) In-plane shear reinforcement of masonry panels with high strength steel cords. In: 12th Structural Faults and Repair, 10 - 12 June 2008, Edinburgh, Scotland.

Borri, Antonio, Castori, Giulio and Corradi, Marco (2010) Mechanical behaviour of brick masonry arches strengthened by GFRP sheet and CFRP plates. In: 8th International Masonry Conference, 4 - 7 July 2010, Dresden, Germany.

Borri, Antonio, Castori, Giulio, Corradi, Marco, Giannantoni, Andrea and Speranzini, Emanuela (2010) Strength of masonry walls before and after reinforcement. In: 13th Structural Faults and Repair, 15 - 17 June 2010, Edinburgh, Scotland.

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Ageing problems of GFRP grids used for masonry reinforcement. In: MURICO 2014, 9 - 11 September 2014, Ravenna, Italy.

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Reinforcement of masonry panels with GFRP grids. In: 9th International Conference on Structural Analysis of Historical Constructions, 14 - 17 October 2014, Mexico City.

Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2014) Durability analysis for FRP and SRG composites in civil applications. In: MURICO 2014, 9 - 11 September 2014, Ravenna, Italy.

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2003) FRP reinforcement of wood elements under bending loads. In: 10th Structural Faults and Repair 2003, 1 - 3 July 2003, London, UK.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reinforcement of historic masonry: the “Reticolatus” technique. In: Repair, Conservation and Strengthening of Traditionally Erected Buildings and Historic Buildings, 2 - 4 December 2009, Wroclaw, Poland.

Bowes, Aidan and Hasan, Reaz (2015) A computational analysis of flow and acoustics around a car wing mirror. In: World Congress on Engineering 2015, 1-3 July 2015, Imperial College, London.

Castori, Giulio, Corradi, Marco, Borri, Antonio and Sisti, Romina (2014) Strengthening of historic masonry walls using GFRP grids embedded into inorganic matrices. In: 9th International Masonry Conference, 7 - 9 July 2014, Guimarães, Portugal.

Chaal, Hamza and Jovanovic, Milutin (2010) Direct power control of brushless doubly-fed reluctance machines. In: 5th IET International COnference on Power Electronics, Machines and Drives (PEMD), 19-21 April 2010, Brighton, UK.

Chan, Lydia, Shyha, Islam, Dreyer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. In: 4th Asia Conference on Mechanical and Materials Engineering, 14-18 July 2016, Kuala Lumpur.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2016) Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Chesters, J. and Porter, Mic (1992) A preliminary subjective and technical assessment of 19 pairs of ear muffs. In: Annual Conference of the Ergonomics Society, 7-10 April 1992, Birmingham.

Cheung, Wai Ming and Aso, Raymond (2015) A Quantitative Analysis System for Greener Wind Turbine Concept Selection. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James X. and Aziz, Hayder (2004) A Framework for distributed Workflows, Peer-to-Peer and PLM/PDM collaborations to support OEMs and SMEs. In: 2nd International CIRP Seminar on Digital Enterprise Technology (DET04), 1 - 3 September 2004, Seattle, Washington USA.

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2009) Data Modelling and Optimization in Cost Estimation for Innovative Low Volume Product Development. In: ICMR'09 - 7th International Conference on Manufacturing Research, 8th - 10th September 2009, Warwick, UK.

Cheung, Wai Ming, Pachisia, Vedant and Hasan, Reaz (2014) Facilitating Waste Paper Recycling and Remanufacturing via a Cost Modelling Approach. In: International Conference on Sustainable Design and Manufacturing, 28-30 April 2014, Cardiff University.

Cheung, Wai Ming, Tan, Kian, Tan, Swee and Sutton, Caroline (2013) Strategies for Implementing Activity-Based Costing in the UK Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September, Cranfield University.

Connor, Chris and Beckwith, Mark (2014) Product Design Education: Different Perspectives. In: 16th International Conference on Engineering and Product Design Education, 4th - 5th September 2014, Enschede, The Netherlands.

Corradi, Marco, Castori, Giulio and Borri, Antonio (2014) A new method for strengthening tiled vaults: “Reinforced Catalan vaulting”. In: 9th International Masonry Conference, 7 - 9 July 2014, Guimarães, Portugal.

Corradi, Marco, Isidori, Tatiana, Soleri, Fabio, Olivari, Luca, Corradi, Marco and Kenny, J. (2007) Bamboo structural composites for marine applications. In: SAMPE Europe 28th International Conference and Forums, 2 - 4 April 2007, Paris, France.

Corradi, Sandro, Isidori, Tatiana, Soleri, Fabio, Olivari, Luca and Corradi, Marco (2007) Composite Boat Hulls with Bamboo Natural Fibres. In: International Conference Innovative Natural Fibre Composites for Industrial Applications, 10 - 13 October 2007, Rome.

Crapper, Martin and Ali, K. H. (1997) A Laboratory Study of Cohesive Sediment Transport. In: 4th International Nearshore and Estuarine Sediment Transport Conference INTERCOH 94, 11-15 July 1997, Wallingford.

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2013) Acausal Modelling and Dynamic Simulation of the Standalone Wind-Solar Plant using Modelica. In: 15th International Conference on Computer Modelling and Simulation (UKSIM 2013), 10-12 April 2013, Cambridge, UK.

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2013) Modeling and Simulation of a Combined Solar and Wind Energy System using OpenModelica. In: 5th OpenModelica / 7th MODPROD Annual Workshops, 4-7 February 2013, Linkoping, Sweden.

ElBanhawy, Eiman, Dalton, Ruth and Anumba, Chimay (2014) The Agent Based Modeling of e-mobility. In: Transportation Electrification Conference and Expo (ITEC), 2014 IEEE, 15th - 18th Jun 2014, Dearborn, Michigan.

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2015) A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs). In: MMIRA Asia Regional Conference, 19 - 20 September 2015, Osaka.

English, Stuart (2007) Mapping key factors in value innovation. In: 9th International Conference on Engineering and Product Design Education, 13-14 September 2007, Newcastle-upon-Tyne.

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2014) Investigation of enhancement of heat transfer in natural convection utilizing of nanofluids. In: XIII International Conference on Heat Transfer Applications, 19-20 January, 2015, London.

Etaig, Saleh, Hasan, Reaz, Perera, Noel and Ramadan, Ahmed (2017) Investigation of the effect of Brownian motion on the flow characteristics in natural convection using different nanofluids. In: CHT-17 - ICHMT International Symposium on Advances in Computational Heat Transfer, 28th May - 1st June 2017, Napoli, Italy.

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2015) An approach to achieve operational effectiveness and sustainability requirements in manufacturing. In: International Conference on Manufacturing Research (ICMR2015), 8 - 10 September, 2015, Bath.

Fekri, Sajjad, Gu, Da-Wei, Khan, Nishat and Postlethwaite, Ian (2010) Fault detection, isolation, and accommodation in a UAV longitudinal control system. In: 2010 Conference on Control and Fault-Tolerant Systems (SysTol), 6-10 October 2010, Nice, France.

Gariani, Salah, Shyha, Islam and Inam, Fawad (2016) Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Gibson, Helen and Faith, Joe (2011) Node-attribute graph layout for small-world networks. In: 15th International Conference on Information Visualisation (IV), 12-15 July 2011, London.

Gilmour, M. S. and Wu, Hongwei (2015) House Design with Energy Saving System: A Review. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Gledson, Barry and Dawson, Susan (2016) Use of simulation through BIM-enabled Virtual Projects to enhance learning and soft employability skills in Architectural Technology education. In: International SEEDS Conference 2016, 14th - 15th September 2016, Leeds, UK.

Gledson, Barry, Greenwood, David, Routledge, Peter, Watson, Richard and Woddy, Paul (2016) Preparing to work in level 2 BIM: an innovative approach to a training and educational need. In: 1st International UK BIM Academic Forum Conference, September 13th-15th, 2016, Glasgow Caledonian University.

Greenwood, David, Lewis, Simon and Lockley, Steve (2010) Contractual issues in the total use of building information modelling. In: 18th CIB World Building Congress, 10-13 May 2010, Salford.

Hackney, Philip and Ainsley, Christopher (2011) Rapid manufacturing- state of the art, analysis and future perspectives. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Hackney, Philip and Curry, Paul (2011) A case study of the benefits and conflicts of knowledge between industry, academia and government. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Hajirasouliha, Farzaneh, Yang, Hua, Wu, Qiang and Zabiegaj, Dominika (2021) Optical Fiber: A Potential Method for Critical Micelle Concentration Measurement. In: Droplets 2021 : 5th International Conference on Droplets, 16-18 Aug 2021, Darmstadt, Germany. (In Press)

Harrington, Peter and Ng, Wai Pang (2012) Investigation of the speed-up of a dual microcontroller parallel processing system in the execution of a mathematical operation. In: PGNet 2012: The 13th Annual Postgraduate Symposium on The Convergence of Telecommunications, Networking and Broadcasting, 25-26 June 2012, Liverpool, UK.

Hasan, Reaz, Tudor, Jenna and Ramadan, Ahmed (2015) Modelling of Flow and Heat Transfer in Spent Fuel Cooling Ponds. In: International Congress on Advances in Nuclear Power Plants, 3-5 May 2015, Nice, France.

Hernandez-Somoza, Maria, Alafogianni, Maria, Stylianidis, Nearchos, Unsal, Ibrahim and Maheri, Alireza (2015) Incorporating end-user requirements in design of hybrid renewable energy systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Hernandez-Somoza, Maria, Christou, Neofytos, Morganti, Manlio and Maheri, Alireza (2015) Design of nanofluid solar collectors. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Inam, Fawad (2014) Structural health assessing capabilities in polymeric and ceramic nanocomposites filled with carbon nanofillers. In: International Conference on Structural Nano Composites (NANOSTRUC 2014), 20-21 May, 2014, Madrid, Spain.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. In: The Asian Symposium of Computational Heat Transfer and Fluid Flow, 22-26 September 2011, Kyoto University, Kyoto, Japan.

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2012) Optimisation of grid-connected hybrid wind-PV-systems with battery bank storage. In: World Renewable Energy Forum, 13-17 May 2012, Denver, Colorado.

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2013) Wind speed and solar irradiance variation simulation using ARMA models in design of hybrid wind-PV battery system. In: 2nd International Conference on Clean and Green Energy (ICCGE 2013), 19-20 January 2013, Dubai.

Kamjoo, Azadeh, Maheri, Alireza, Putrus, Ghanim and Dizqah, Arash (2012) Optimal sizing of grid-connected hybrid wind-PV systems with battery bank storage. In: World Renewable Energy Forum (WREF 2012), 13-17 May 2012, Denver, CO.

Kawash, F. and Maheri, Alireza (2013) Updated cost modeling of hybrid renewable energy system components. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Kode, T. E., Wu, Hongwei and Ogwu, A. A. (2015) Critical Review of the Thermo-hydraulic Properties of Fluids in Micro Channels. In: The 8th International Conference on Sustainable Energy & Environmental Protection, Proceedings of SEEP 2015, August 11-14, 2015, Paisley, UK.

Liu, Xiangyun, Liu, L., Wang, Wu, He, Bin and Wu, Hongwei (2015) Numerical Simulation of Gas-liquid Two-phase Flow in Non-circular Micro-channels. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Wu, Hongwei and Mirzaeian, Mojtaba (2015) Numerical Simulation of Vapor-liquid Two Phase Flow with Dirt Blocking Effect inside Channels. In: The 3rd SusTEM International Conference, 7-8 July 2015, Newcastle upon Tyne, UK.

Liu, Xiaoxu and Gao, Zhiwei (2015) Novel unknown input observer for fault estimation of gas turbine dynamic systems. In: 13th IEEE Conference on Industrial Informatics (INDIN), 22 - 24 July 2015, Cambridge.

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) A simple method to determine the optimal location of active flow controllers on wind turbine blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Mallory, Adrian, Crapper, Martin and Holm, Rochelle (2018) When faecal sludge reuse doesn’t work: a look at access for the poorest and people with disabilities in urban Malawi. In: 41st WEDC International Conference: Transformation Towards Sustainable and Resilient Wash Services, 9th - 13th July 2018, Nakuru, Kenya.

McDowell, Liz and Tan, John (2008) Becoming and being an engineer in an international context : developing international students' engagement with 'real world' research at Masters' level. In: Engineering Education 2008, July 2008, Loughborough, United Kingdom.

McDowell, Liz, Tan, John, Penlington, Roger and Montgomery, Catherine (2008) Becoming and being an engineer in an internationalised context : international students' construction of their experiences in higher education. In: Transforming the Student Experience : Higher Education Academy 4th Annual Conference, 1-3 July 2008, Harrogate.

Montgomery, Catherine, Penlington, Roger, Tan, John and McDowell, Liz (2008) Becoming and being an engineer in an internationalised context : international students' engagement with 'real world' enquiry at Masters' level. In: HEA Annual Conference 2008: Transforming the Student Experience, 1st - 3rd July 2008, Harrogate, UK.

Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Determination of wood strength properties through standard test procedures. In: ICMR 2012: 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Evaluation of handsaw tooth performance through the development of a controlled cutting test rig. In: ICMR 2012: International Conference on Manufacturing Research 2012, 11-13 September 2012, Aston University, Birmingham, UK.

Naylor, Andrew, Huo, Dehong, Hackney, Philip and Perera, Noel (2017) Operational performance of individual handsaw teeth. In: 23rd International Wood Machining Seminar, 28th-31st May 2017, Warsaw, Poland.

Ng, Bobo, Tindall, Jess, Edge, Jerry, Morrell, Joe, Tioh, D., Choi, K., Du, Hu, Wei, Shen, Waggott, A., Barber, A., Keating, M., Walker, Sara and Qian, Zi (2018) Refurbishment options to decarbonise a 1960s public office building by 2050s. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Odofin, Sarah, Gao, Zhiwei and Sun, Kai (2015) Robust fault estimation in wind turbine systems using GA optimisation. In: 13th IEEE Conference on Industrial Informatics (INDIN), 22 - 24 July 2015, Cambridge.

Okolo, Chichi and Inam, Fawad (2017) Advanced nanocomposite materials for subsea oil & gas production. In: Applied Nanotechnology and Nanoscience International Conference 2017, 18-20 October, 2017, Rome, Italy.

Okolo, Chichi and Inam, Fawad (2017) Fullerene based polymeric nanocomposites for advanced oil/gas subsea applications. In: AMPE 2017 - 2nd International Conference on Advanced Materials and Process Engineering, 12th - 13th December 2017, Karachi, Pakistan.

Omoware, Wisdom, Maheri, Alireza and Azimov, Ulugbek (2014) Aerodynamic analysis of flapping-pitching flat plates. In: 3rd International Symposium on Environmental Friendly Energies and Applications (EFEA), 19-21 November 2014, Paris.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2013) A Review of Life Cycle Assessment of Renewable Energy Systems. In: 11th International Conference on Manufacturing Research, 19 - 20 September 2013, Cranfield University.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.

Padwick, Annie, Davenport, Carol, Strachan, Rebecca and Shimwell, Joe (2017) The NUSTEM Approach: Tackling the Engineering and Gender Challenge Together from Early Years to Sixth Form and beyond. In: IET/EPC Conference: New Approaches to Engineering in Higher Education, 22nd May 2017, London, UK.

Penlington, Roger, Tudor, Jenna and Perera, Noel (2013) Staff and student perspectives on embedding sustainability into the engineering curriculum. In: Engineering Education for Sustainable Development Conference 2013, 22 - 25 September 2013, Cambridge.

Perampalam, Gatheeshgar, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Tsavdaridis, Konstantinos D. and Nagaratnam, Brabha (2019) Flexural Behaviour of optimised cold-formed steel beams with sleeve stiffened web openings. In: 10th International Conference on Structural Engineering and Construction Management, 12th - 14th December 2019, Kandy, Sri Lanka. (Unpublished)

Perera, Noel, Oriaifo, Aigbokhaebho, Guy, Alan, Leung, Pak Sing and Tan, Kian (2015) Investigating the accelerated test condition to produce cracking failure of water ballast tank coatings. In: The 6th International Congress of Energy and Environment Engineering and Management (CIIEM15),, 22-24 July 2015, Paris.

Porter, Mic (1992) Controlling musculoskeletal injuries at work demands more than systems ergonomics. In: Annual Conference of the Ergonomics Society, 7-10 April 1992, Birmingham.

Putrus, Ghanim (2009) Intelligent power quality monitoring of electrical supply. In: World Congress on Engineering 2009, 1-3 July 2009, London, UK.

Rahma, Elsiddig, Perera, Noel and Tan, Kian (2016) Oil price shocks and Sudan’s current account. In: 4th IBESRA Conference 2016, 27-28 February 2016, Istanbul.

Rahma, Elsiddig, Perera, Noel and Tan, Kian (2016) Oil price shocks and their consequences on Sudan's GDP growth and unemployment rates. In: 21st International Academic Conference, 9 -12 February 2016, Miami.

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2015) Numerical simulation of flow and heat transfer around vertical cylinder submerged in water. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

Sahadevan, Subash, Shingate, Suyog and Maheri, Alireza (2015) Effect of dispatch strategy on the performance of hybrid wind-PV-battery-diesel-fuel cell systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sedef, Kanber and Maheri, Alireza (2015) Multiobjective route planner for electric car with dijkstra algorithm. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sedef, Kanber and Maheri, Alireza (2015) A driving cycle generating tool for evaluating eco-urban car power performance. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Somoza, Maria Hernandez, Macquart, Terence and Maheri, Alireza (2014) Reduction of tidal turbines hydrodynamic loads employing bend-twist adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Steiner, Simon and Penlington, Roger (2010) Approaches to the embedding of sustainability into the engineering curriculum - where are we now, and how do our graduates become global engineers? In: Engineering Education 2010, 6-10 July 2010, Aston University, Birmingham.

Stylianidis, Nearchos, Macquart, Terence and Maheri, Alireza (2014) Aerodynamic design of wind turbine blades considering manufacturing constraints. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Suntharalingam, Thadshajini, Nagaratnam, Brabha, Poologanathan, Keerthan, Hackney, Philip and Ramli, Jeffri (2019) Evolution of additive manufacturing technology in construction industry & challenges on implementation: a review. In: 10th International Conference on Structural Engineering and Construction Management, 12th - 14th December 2019, Kandy, Sri Lanka. (Unpublished)

Tao, Zhi, Han, Shujun, Ding, Shuiting and Wu, Hongwei (2008) A new approach to simulate the fluid network of unsteady flow. In: The 8th International Symposium on Advances in Computational Heat Transfer, 11 - 16 May 2008, Marrakech.

Tao, Zhi, Liu, N., Ding, Shuiting, Xu, Guoqiang and Wu, Hongwei (2008) Numerical simulation of film cooling effectiveness on flat plate. In: The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 17-22 February 2008, Honolulu, Hawaii.

Tianxiang, Jiang, Putrus, Ghanim, Zhiwei, Gao, Conti, Matteo and McDonald, Stephen (2013) Optimal Charging Strategy for EVs with Batteries at Different States of Health. In: Fourth International Conference on Power Engineering, Energy and Electrical Drives (POWERENG 2013), 13th - 17th May 2013, Istanbul, Turkey.

Wang, C., Xu, Ben, Terry, Jonathan, Smith, Stewart, Walton, Anthony and Li, Yifan (2017) Test Structures for Stepwise Deformation Sensing on Super-flexible Strain Sensors. In: Microelectronic Test Structures (ICMTS), 2017 IEEE International Conference on, 27-30 March 2017, Grenoble.

Wang, Pengfei, Brambilla, Gilberto, Senthil Murugan, Ganapathy, Semenova, Yuliya, Wu, Qiang, Wilkinson, James S. and Farrell, Gerald (2011) Chalcogenide microsphere fabricated from fibre taper-drawn using resistive heating. In: 19th Annual International Conference on Composites or Nano Engineering (ICCE-19), 24-30 July 2011, Shanghai.

Wei, Shen, Yong, Junfeng, Ng, Bobo, Tindall, Jess, Lu, Qin and Du, Hu (2018) Occupant Adaptive Behaviour: an Effective Method towards Energy Efficient Buildings. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Woods, Thomas, Cheung, Wai Ming, Hilton, Kevin and Penlington, Roger (2015) Environmental Impact Reduction for Small and Medium-sized Manufacturing Enterprises in New Product Development. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Woods, Thomas, Cheung, Wai Ming, Penlington, Roger and Hilton, Kevin (2011) Long term sustainable product development at the packaging sector. In: 9th International Conference on Manufacturing Research, 6 - 8 September 2011, Glasgow Caledonian University.

Wu, Hongwei, Kwatra, R., Mirzaeian, Mojtaba, Liu, Xiangyun and Grant, J. (2015) Experimental Investigation and CFD Analysis of a Y-Fractal Microchannel Based Heat Sink. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Wu, Hongwei, Tao, Zhi, Chen, Guohua, Xu, Guoqiang and Ding, Shuiting (2004) Theoretical study of heat and mass transfer within cylindrical porous media with cylindrical dielectric cores in microwave freeze-drying. In: International Conference on Thermal Engineering: Theory and Applications, 31 May - June 4 2004, Beirut.

Wu, Hongwei, Tassou, S. A., Jouhara, H. and Karayiannis, T. G. (2010) Analysis of energy use in crisp frying processes. In: The 4th International Conference on Sustainable Energy & Environmental Protection, 29 June - 2 July 2010, BARI, Italy.

Xu, Ben (2016) Smart materials and technologies for future engineering. In: Newton Researcher Links Workshop on Energy and Environment, July 8-10 2016, Xi'an, China.

Xu, Guoqiang, Wang, Meng, Tao, Zhi, Ding, Shuiting, Wu, Hongwei and Guo, Jun (2008) Numerical analysis of flow and heat transfer characteristics of Y-fractal-link micro-channel networks. In: The 8th International Symposium on Advances in Computational Heat Transfer, 11 - 16 May 2008, Marrakech.

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2008) Theoretical Analysis of Rotating Film Cooling Mechanism: Part I. Dimensionless Groups of Adiabatic Effectiveness and Heat Transfer Coefficient. In: The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 17 -22 February 2008, Honolulu, Hawaii.

Zhang, Hui and Maheri, Alireza (2014) A software tool for optimising structural and material configurations of wind turbine adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2007) Polystyrene nanocomposite foams prepared by dynamic foaming process. In: First International Conference and Exhibition on Integration and Commercialization of Micro and Nanosystems, 10-13 January 2007, Hainan.

Book

Andrews, Jane, Clark, Robin, Nortcliffe, Anne and Penlington, Roger (2018) 5th Annual Symposium of the United Kingdom & Ireland Engineering Education Research Network: Time for change. Aston University, Birmingham. ISBN 978 1 85449 443 6

Baila, A., Binda, Luigia, Borri, Antonio, Cangi, G., Cardani, G., Castori, Giulio, Corradi, Marco, De Maria, Alessandro, del Monte, E., Dona, Chiara, Galano, L., Giannantoni, Andrea, Ortolani, B., Pagliazzi, A., Saisi, A., Sperandio, D., Speranzini, Emanuela, Tedeschi, Cristina and Vignoli, Andrea (2011) Manuale delle murature storiche. DEI, Rome. ISBN 978-8849604030

Batino, Sabrina, Corradi, L., Corradi, Marco, Corradi, Sandro, Marchetti, M., Rasimelli, I. and Tortoreto, M. (2003) Il traffico sull’antica via Flaminia. Thyrus.

Borri, Antonio, Corradi, Marco and Vignoli, Andrea (2002) Ricerche per la ricostruzione: Iniziative a carattere tecnico e scientifico a supporto della ricostruzione. DEI.

Kirillov, Oleg (2013) Nonconservative Stability Problems of Modern Physics. De Gruyter Studies in Mathematical Physics, 14 . De Gruyter, Berlin. ISBN 978-3-11-027043-3

Penlington, Roger and Andrews, Jane (2018) The First Spring Colloquium of the United Kingdom & Ireland Engineering Education Research Network. Northumbria University, Online. ISBN 9781861354792

Penlington, Roger and Steiner, Simon (2014) An Introduction to Sustainable Development in the Engineering Curriculum. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK. ISBN 978-1-904804-22-8

Penlington, Roger and Steiner, Simon (2010) An introduction to sustainable development in the Engineering curriculum. Higher Education Academy, York. ISBN 9781904804970

Rajbhandari, Sujan, Busawon, Krishna, Maheri, Alireza and Djemaï, Mohamed (2012) Proceedings of the 2nd International Symposium On Environment Friendly Energies And Applications (EFEA 2012). IEEE, Piscataway, NJ. ISBN 978-1467329095

Underwood, Chris and Yik, Francis (2004) Modelling methods for energy in buildings. Blackwell Science, Oxford. ISBN 9780632059362

Thesis

Ahmad, Haifa (2010) Studies and modelling of high temperature diffusion processes in selected high performance structural coating systems. Doctoral thesis, Northumbria University.

Al-Janabi, Darkam (2017) An investigation into the relationship between organisational culture and maintenance implementation in Iraqi power plants. Doctoral thesis, Northumbria University.

Albadran, Abdullah (2015) An Investigation of ISO 9000 Implementation Issues In Saudi Arabia Manufacturing Industry. Doctoral thesis, Northumbria University.

Ali, Abdalla (2016) Development of a Multi-Objective Scheduling System for Complex Job Shops in a Manufacturing Environment. Doctoral thesis, Northumbria University.

Bauer, Thomas (2006) Thermophotovoltaic applications in the UK : critical aspects of system design. Doctoral thesis, Northumbria University.

Doraisingam, Anand Raj (2003) Simulation of the intermittent cutting action of a bandsaw blade. Doctoral thesis, Northumbria University.

Dudziak, Tomasz (2010) High temperature corrosion studies and interdiffusion modelling in TiAl based alloys coated with high performance surface layers. Doctoral thesis, Northumbria University.

Ellwein, Christian (2002) Vibration based fault detection for Solenoid valves. Doctoral thesis, Northumbria University.

Etaig, Saleh (2017) Investigation of the enhancement of convective heat transfer for wall-bounded flows utilizing nanofluids. Doctoral thesis, Northumbria University.

Gheblawi, Ezzeddin (2006) An investigation of the heat transfer by conduction and radiation between hot glass and tool moulding. Doctoral thesis, Northumbria University.

Htay, Zun (2023) A High-speed Reconfigurable Free Space Optical Communication System Utilizing Software Defined Radio Environment. Doctoral thesis, Northumbria University.

Kahwash, Fadi (2017) Element-free galerkin modelling for cutting of fibre reinforced plastics. Doctoral thesis, Northumbria University.

Labarbe, Joris (2021) Radiative and diffusive instabilities in moving fluids. Doctoral thesis, Northumbria University.

Lim, Eng G. (2002) Circular polarised microstrip antenna design using segmental methods. Doctoral thesis, Northumbria University.

Masoud Ameli, Seied (2012) Additive layer manufactured sinter-style aluminium/ammonia heat pipes. Doctoral thesis, Northumbria University.

Nasikkar, Paresh (2009) The development of cuIn1-xALSe2 thin films for use in photovoltaic solar cells. Doctoral thesis, Northumbria University.

Naylor, Andrew (2012) Utilisation of Single Tooth Procedures to Establish the Cutting Mechanics of Woodworking Hand-saw Teeth. Doctoral thesis, University of Northumbria.

Ng, Chong (2007) Control of active filters to attenuate harmonic resonance in power distribution networks. Doctoral thesis, Northumbria University.

Ozoemena, Matthew (2016) Sustainability Assessment of Wind Turbine Design Variations: An Analysis of the Current Situation and Potential Technology Improvement Opportunities. Doctoral thesis, Northumbria University.

Ponton, Hazel (2021) Social interactions in construction design team meetings. Doctoral thesis, Northumbria University.

Ramachandran, Jayaraman (2005) Modelling of grid connected geographically dispersed PV systems for power system studies. Doctoral thesis, Northumbria University.

Tang, Xuan (2012) Polarisation shift keying modulated free-space optical communication systems. Doctoral thesis, Northumbria University.

Wiratama, I. Kade (2012) Aerodynamic Design of Wind Turbine Blades Utilising Nonconventional Control Systems. Doctoral thesis, Northumbria University.

Patent

Ekaterina McKenna, Yifan Li, Andrew Pitt, Anthony Walton, William Parkes (2013) Assay assembly and method. US 20130252847 A1.

University of Westminster (2017) Exhaled breath condensate collection device and a kit of parts thereof. GB2548122 (A).

Other

Penlington, Roger and Steiner, Simon (2014) Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK.

This list was generated on Mon Nov 4 15:18:57 2024 UTC.